infra/platforms: update fvp download section

The Neoverse reference design FVPs are now available for download from
the Arm FVP ecosystem page. Update the section on platform FVP download
with this information for all the supported platforms.

Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I3f7e7d7dc0a20684140d5be61a531700fba56120

docs/infra/rde1edge/readme.rst

@@ -33,18 +33,18 @@ Host Machine requirements and the necessary steps to be followed to sync the
 software stack are listed on '`Download sources`_' page.
 
 
-Obtaining the RD-E1-Edge Fast Model
------------------------------------
+Obtaining the RD-E1-Edge FVP
+----------------------------
 
-The latest version of RD-E1-Edge Fast Model can be requested by sending a email
-to Arm at this email address: `support-connect@arm.com <mailto:support-connect@arm.com>`_.
+The latest version of the RD-E1-Edge fixed virtual platform (FVP) can be
+downloaded from the `Arm Ecosystem FVPs`_ page. On this page, navigate to
+"Neoverse Infrastructure FVPs" section to download the RD-E1-Edge platform
+FVP installer.
 
-Follow the instruction in the installer and setup the FVP. Typically, the
-installer will ask to create a new folder in the home directory. You can either
-install the FVP in the home folder, or in the ``fastmodel/refinfra`` folder
-inside the workspace. If you would like to install in the ``fastmodel/refinfra``
-folder, when asked for the install location, provide the absolute path of the
-``fastmodel/refinfra``.
+Follow the instructions of the installer and setup the FVP. The installer, by
+default, selects the home directory to install the FVP. To opt for different
+directory than the one selected by the installer, provide an absolute path to
+that directory when prompted for during the FVP installation process.
 
 
 Supported Features
@@ -81,6 +81,7 @@ validated in each release is listed in `change log`_.
 *Copyright (c) 2021, Arm Limited. All rights reserved.*
 
 
+.. _Arm Ecosystem FVPs: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
 .. _Busybox Boot: docs/infra/common/busybox-boot.rst
 .. _Buildroot Boot: docs/infra/common/buildroot-boot.rst
 .. _Linux Distribution Boot: docs/infra/common/distro-boot.rst

docs/infra/rdn1edge/readme.rst

@@ -33,18 +33,18 @@ Host Machine requirements and the necessary steps to be followed to sync the
 software stack are listed on '`Download sources`_' page.
 
 
-Obtaining the RD-N1-Edge Fast Model
------------------------------------
+Obtaining the RD-N1-Edge FVP
+----------------------------
 
-The latest version of RD-N1-Edge Fast Model can be requested by sending a email
-to Arm at this email address: `support-connect@arm.com <mailto:support-connect@arm.com>`_.
+The latest version of the RD-N1-Edge fixed virtual platform (FVP) can be
+downloaded from the `Arm Ecosystem FVPs`_ page. On this page, navigate to
+"Neoverse Infrastructure FVPs" section to download the RD-N1-Edge platform
+FVP installer.
 
-Follow the instruction in the installer and setup the FVP. Typically, the
-installer will ask to create a new folder in the home directory. You can either
-install the FVP in the home folder, or in the ``fastmodel/refinfra`` folder
-inside the workspace. If you would like to install in the ``fastmodel/refinfra``
-folder, when asked for the install location, provide the absolute path of the
-``fastmodel/refinfra``.
+Follow the instructions of the installer and setup the FVP. The installer, by
+default, selects the home directory to install the FVP. To opt for different
+directory than the one selected by the installer, provide an absolute path to
+that directory when prompted for during the FVP installation process.
 
 
 Supported features
@@ -83,6 +83,7 @@ validated in each release is listed in `change log`_.
 *Copyright (c) 2021, Arm Limited. All rights reserved.*
 
 
+.. _Arm Ecosystem FVPs: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
 .. _Busybox Boot: docs/infra/common/busybox-boot.rst
 .. _Buildroot Boot: docs/infra/common/buildroot-boot.rst
 .. _Linux Distribution Boot: docs/infra/common/distro-boot.rst

docs/infra/rdn1edgex2/readme.rst

@@ -38,18 +38,18 @@ Host Machine requirements and the necessary steps to be followed to sync the
 software stack are listed on '`Download sources`_' page.
 
 
-Obtaining the RD-N1-Edge-Dual Fast Model
-----------------------------------------
+Obtaining the RD-N1-Edge-Dual FVP
+---------------------------------
 
-The latest version of RD-N1-Edge-Dual Fast Model can be requested by sending a
-email to Arm at this email address: `support-connect@arm.com <mailto:support-connect@arm.com>`_.
+The latest version of the RD-N1-Edge-Dual fixed virtual platform (FVP) can be
+downloaded from the `Arm Ecosystem FVPs`_ page. On this page, navigate to
+"Neoverse Infrastructure FVPs" section to download the RD-N1-Edge platform
+FVP installer.
 
-Follow the instruction in the installer and setup the FVP. Typically, the
-installer will ask to create a new folder in the home directory. You can either
-install the FVP in the home folder, or in the ``fastmodel/refinfra`` folder
-inside the workspace. If you would like to install in the ``fastmodel/refinfra``
-folder, when asked for the install location, provide the absolute path of the
-``fastmodel/refinfra``.
+Follow the instructions of the installer and setup the FVP. The installer, by
+default, selects the home directory to install the FVP. To opt for different
+directory than the one selected by the installer, provide an absolute path to
+that directory when prompted for during the FVP installation process.
 
 
 Supported features
@@ -86,6 +86,7 @@ validated in each release is listed in `change log`_.
 *Copyright (c) 2021, Arm Limited. All rights reserved.*
 
 
+.. _Arm Ecosystem FVPs: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
 .. _Busybox Boot: docs/infra/common/busybox-boot.rst
 .. _Buildroot Boot: docs/infra/common/buildroot-boot.rst
 .. _Linux Distribution Boot: docs/infra/common/distro-boot.rst

docs/infra/rdn2/readme.rst

@@ -31,18 +31,19 @@ Host Machine requirements and the necessary steps to be followed to sync the
 software stack are listed on '`Download sources`_' page.
 
 
-Obtaining the RD-N2 Fast Model
-------------------------------
+Obtaining the RD-N2 FVP
+-----------------------
 
-The latest version of RD-N2 Fast Model can be requested by sending a email to
-Arm at this email address: `support-connect@arm.com <mailto:support-connect@arm.com>`_.
+The latest version of the RD-N2 fixed virtual platform (FVP) can be
+downloaded from the `Arm Ecosystem FVPs`_ page. On this page, navigate to
+"Neoverse Infrastructure FVPs" section to download the RD-N2 platform
+FVP installer.
+
+Follow the instructions of the installer and setup the FVP. The installer, by
+default, selects the home directory to install the FVP. To opt for different
+directory than the one selected by the installer, provide an absolute path to
+that directory when prompted for during the FVP installation process.
 
-Follow the instruction in the installer and setup the FVP. Typically, the
-installer will ask to create a new folder in the home directory. You can either
-install the FVP in the home folder, or in the ``fastmodel/refinfra`` folder
-inside the workspace. If you would like to install in the ``fastmodel/refinfra``
-folder, when asked for the install location, provide the absolute path of the
-``fastmodel/refinfra``.
 
 
 Supported Features by RD-N2 platform software stack
@@ -83,6 +84,7 @@ validated in each release is listed in `change log`_.
 *Copyright (c) 2020-2021, Arm Limited. All rights reserved.*
 
 
+.. _Arm Ecosystem FVPs: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
 .. _Busybox Boot: docs/infra/common/busybox-boot.rst
 .. _Linux Distribution Boot: docs/infra/common/distro-boot.rst
 .. _WinPE Boot: docs/infra/common/winpe-boot.rst

docs/infra/rdv1/readme.rst

@@ -34,18 +34,18 @@ Host Machine requirements and the necessary steps to be followed to sync the
 software stack are listed on '`Download sources`_' page.
 
 
-Obtaining the RD-V1 Fast Model
-------------------------------
+Obtaining the RD-V1 FVP
+-----------------------
 
-The latest version of RD-V1 Fast Model can be requested by sending a email to
-Arm at this email address: `support-connect@arm.com <mailto:support-connect@arm.com>`_.
+The latest version of the RD-V1 fixed virtual platform (FVP) can be
+downloaded from the `Arm Ecosystem FVPs`_ page. On this page, navigate to
+"Neoverse Infrastructure FVPs" section to download the RD-V1 platform
+FVP installer.
 
-Follow the instruction in the installer and setup the FVP. Typically, the
-installer will ask to create a new folder in the home directory. You can either
-install the FVP in the home folder, or in the ``fastmodel/refinfra`` folder
-inside the workspace. If you would like to install in the ``fastmodel/refinfra``
-folder, when asked for the install location, provide the absolute path of the
-``fastmodel/refinfra``.
+Follow the instructions of the installer and setup the FVP. The installer, by
+default, selects the home directory to install the FVP. To opt for different
+directory than the one selected by the installer, provide an absolute path to
+that directory when prompted for during the FVP installation process.
 
 
 Supported Features by RD-V1 platform software stack
@@ -85,6 +85,7 @@ validated in each release is listed in `change log`_.
 *Copyright (c) 2020-2021, Arm Limited. All rights reserved.*
 
 .. _here: docs/infra/rdv1mc/readme.rst
+.. _Arm Ecosystem FVPs: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
 .. _Busybox Boot: docs/infra/common/busybox-boot.rst
 .. _Buildroot Boot: docs/infra/common/buildroot-boot.rst
 .. _Linux Distribution Boot: docs/infra/common/distro-boot.rst

docs/infra/rdv1mc/readme.rst

@@ -38,18 +38,18 @@ Host Machine requirements and the necessary steps to be followed to sync the
 software stack are listed on '`Download sources`_' page.
 
 
-Obtaining the RD-V1-MC Fast Model
----------------------------------
+Obtaining the RD-V1-MC FVP
+--------------------------
 
-The latest version of RD-V1-MC Fast Model can be requested by sending a email to
-Arm at this email address: `support-connect@arm.com <mailto:support-connect@arm.com>`_.
+The latest version of the RD-V1-MC fixed virtual platform (FVP) can be
+downloaded from the `Arm Ecosystem FVPs`_ page. On this page, navigate to
+"Neoverse Infrastructure FVPs" section to download the RD-V1 platform
+FVP installer.
 
-Follow the instruction in the installer and setup the FVP. Typically, the
-installer will ask to create a new folder in the home directory. You can either
-install the FVP in the home folder, or in the ``fastmodel/refinfra`` folder
-inside the workspace. If you would like to install in the ``fastmodel/refinfra``
-folder, when asked for the install location, provide the absolute path of the
-``fastmodel/refinfra``.
+Follow the instructions of the installer and setup the FVP. The installer, by
+default, selects the home directory to install the FVP. To opt for different
+directory than the one selected by the installer, provide an absolute path to
+that directory when prompted for during the FVP installation process.
 
 
 Supported Features by RD-V1-MC platform software stack
@@ -84,6 +84,8 @@ validated in each release is listed in `change log`_.
 
 *Copyright (c) 2020-2021, Arm Limited. All rights reserved.*
 
+
+.. _Arm Ecosystem FVPs: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
 .. _Busybox Boot: docs/infra/common/busybox-boot.rst
 .. _Linux Distribution Boot: docs/infra/common/distro-boot.rst
 .. _UEFI Secure Boot: docs/infra/common/secure-boot.rst

docs/infra/sgi575/readme.rst

@@ -30,18 +30,18 @@ Host Machine requirements and the necessary steps to be followed to sync the
 software stack are listed on '`Download sources`_' page.
 
 
-Obtaining the SGI-575 Fast Model
---------------------------------
+Obtaining the SGI-575 FVP
+-------------------------
 
-The latest version of SGI-575 Fast Model can be requested by sending a email
-to Arm at this email address: `support-connect@arm.com <mailto:support-connect@arm.com>`_.
+The latest version of the SGI-575 fixed virtual platform (FVP) can be
+downloaded from the `Arm Ecosystem FVPs`_ page. On this page, navigate to
+"Neoverse Infrastructure FVPs" section to download the SGI-575 platform
+FVP installer.
 
-Follow the instruction in the installer and setup the FVP. Typically, the
-installer will ask to create a new folder in the home directory. You can either
-install the FVP in the home folder, or in the ``fastmodel/refinfra`` folder
-inside the workspace. If you would like to install in the ``fastmodel/refinfra``
-folder, when asked for the install location, provide the absolute path of the
-``fastmodel/refinfra``.
+Follow the instructions of the installer and setup the FVP. The installer, by
+default, selects the home directory to install the FVP. To opt for different
+directory than the one selected by the installer, provide an absolute path to
+that directory when prompted for during the FVP installation process.
 
 
 Supported features
@@ -79,6 +79,7 @@ validated in each release is listed in `change log`_.
 *Copyright (c) 2021, Arm Limited. All rights reserved.*
 
 
+.. _Arm Ecosystem FVPs: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
 .. _Busybox Boot: docs/infra/common/busybox-boot.rst
 .. _Buildroot Boot: docs/infra/common/buildroot-boot.rst
 .. _Linux Distribution Boot: docs/infra/common/distro-boot.rst