platforms/rd: console port parameters for WinPE boot

For the keyboard inputs to be functional in the WinPE Special
Administration Console (SAC), enable the hardware flow control
and DC4 commands only for the UART port that used as the WinPE
SAC display.

Change-Id: Ieb7ad25472d75e1852a0e4a0b252ab5099e64cc4
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

rdinfra/platforms/rddaniel/run_model.sh

@@ -282,6 +282,8 @@ PARAMS="-C css.cmn_rhodes.mesh_config_file=$PATH_TO_MODEL/rhodes_daniel_cfgm.yml
 	-C soc.pl011_uart_mcp.out_file=${MODEL_TYPE,,}/${UART0_MCP_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart0.out_file=${MODEL_TYPE,,}/${UART0_ARMTF_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart0.unbuffered_output=1 \
+	-C soc.pl011_uart0.flow_ctrl_mask_en=1 \
+	-C soc.pl011_uart0.enable_dc4=0 \
 	-C soc.pl011_uart1.out_file=${MODEL_TYPE,,}/${UART1_MM_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart1.unbuffered_output=1 \
 	-C css.pl011_uart_ap.unbuffered_output=1 \

rdinfra/platforms/rddanielxlr/run_model.sh

@@ -397,6 +397,8 @@ PARAMS=" \
 	-C soc0.pl011_uart_mcp.out_file=${MODEL_TYPE,,}/${UART0_MCP_OUTPUT_FILE_NAME} \
 	-C soc0.pl011_uart0.out_file=${MODEL_TYPE,,}/${UART0_ARMTF_OUTPUT_FILE_NAME} \
 	-C soc0.pl011_uart0.unbuffered_output=1 \
+	-C soc0.pl011_uart0.flow_ctrl_mask_en=1 \
+	-C soc0.pl011_uart0.enable_dc4=0 \
 	-C soc0.pl011_uart1.out_file=${MODEL_TYPE,,}/${UART1_MM_OUTPUT_FILE_NAME} \
 	-C soc0.pl011_uart1.unbuffered_output=1 \
 	-C css0.pl011_uart_ap.unbuffered_output=1 \

rdinfra/platforms/rde1edge/run_model.sh

@@ -266,6 +266,8 @@ PARAMS="-C css.cmn600.mesh_config_file=$PATH_TO_MODEL/RD_N1_E1_cmn600.yml \
 	-C soc.pl011_uart_mcp.out_file=${MODEL_TYPE,,}/${UART0_MCP_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart0.out_file=${MODEL_TYPE,,}/${UART0_ARMTF_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart0.unbuffered_output=1 \
+	-C soc.pl011_uart0.flow_ctrl_mask_en=1 \
+	-C soc.pl011_uart0.enable_dc4=0 \
 	-C soc.pl011_uart1.out_file=${MODEL_TYPE,,}/${UART1_MM_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart1.unbuffered_output=1 \
 	-C css.pl011_uart_ap.unbuffered_output=1 \

rdinfra/platforms/rdn1edge/run_model.sh

@@ -266,6 +266,8 @@ PARAMS="-C css.cmn600.mesh_config_file=$PATH_TO_MODEL/RD_N1_E1_cmn600.yml \
 	-C soc.pl011_uart_mcp.out_file=${MODEL_TYPE,,}/${UART0_MCP_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart0.out_file=${MODEL_TYPE,,}/${UART0_ARMTF_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart0.unbuffered_output=1 \
+	-C soc.pl011_uart0.flow_ctrl_mask_en=1 \
+	-C soc.pl011_uart0.enable_dc4=0 \
 	-C soc.pl011_uart1.out_file=${MODEL_TYPE,,}/${UART1_MM_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart1.unbuffered_output=1 \
 	-C css.pl011_uart_ap.unbuffered_output=1 \

rdinfra/platforms/rdn1edgex2/run_model.sh

@@ -289,6 +289,8 @@ PARAMS=" \
 	-C soc0.pl011_uart_mcp.out_file=${MODEL_TYPE,,}/${UART0_MCP_OUTPUT_FILE_NAME} \
 	-C soc0.pl011_uart0.out_file=${MODEL_TYPE,,}/${UART0_ARMTF_OUTPUT_FILE_NAME} \
 	-C soc0.pl011_uart0.unbuffered_output=1 \
+	-C soc0.pl011_uart0.flow_ctrl_mask_en=1 \
+	-C soc0.pl011_uart0.enable_dc4=0 \
 	-C soc0.pl011_uart1.out_file=${MODEL_TYPE,,}/${UART1_MM_OUTPUT_FILE_NAME} \
 	-C soc0.pl011_uart1.unbuffered_output=1 \
 	-C css0.pl011_uart_ap.unbuffered_output=1 \

sgi/platforms/sgi575/run_model.sh

@@ -246,6 +246,8 @@ PARAMS="-C css.cmn600.mesh_config_file=\"$PATH_TO_MODEL/SGI-575_cmn600.yml\" \
 	-C soc.pl011_uart_mcp.out_file=${MODEL_TYPE,,}/${UART0_MCP_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart0.out_file=${MODEL_TYPE,,}/${UART0_ARMTF_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart0.unbuffered_output=1 \
+	-C soc.pl011_uart0.flow_ctrl_mask_en=1 \
+	-C soc.pl011_uart0.enable_dc4=0 \
 	-C soc.pl011_uart1.out_file=${MODEL_TYPE,,}/${UART1_MM_OUTPUT_FILE_NAME} \
 	-C soc.pl011_uart1.unbuffered_output=1 \
 	-C css.pl011_uart_ap.unbuffered_output=1 \