platform/rddaniel: add model startup support for RD-Daniel platform

Add initial model startup support for RD-Daniel platform. This supports
busybox and uefi boot tests.

Change-Id: Ia55bd2b59f17b866ceccd12e826230a4d65c0eb1
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>

rdinfra/platforms/rddaniel/run_model.sh

+#!/usr/bin/env bash
+
+# Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# Redistributions of source code must retain the above copyright notice, this
+# list of conditions and the following disclaimer.
+#
+# Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# Neither the name of ARM nor the names of its contributors may be used
+# to endorse or promote products derived from this software without specific
+# prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+
+# Set your ARMLMD_LICENSE_FILE License path for FVP licenses before running
+# this script.
+
+NORMAL_FONT="\e[0m"
+RED_FONT="\e[31;1m"
+GREEN_FONT="\e[32;1m"
+YELLOW_FONT="\e[33;1m"
+ROOTDIR="../../../../output/rddaniel"
+OUTDIR=${ROOTDIR}/rddaniel
+MODEL_TYPE="rddaniel"
+MODEL_PARAMS=""
+FS_TYPE=""
+TAP_INTERFACE=""
+AUTOMATE="false"
+
+source $PWD/../../../sgi/sgi_common_util.sh
+
+# Check that a path to the model has been provided
+if [ ! -e "$MODEL" ]; then
+	#if no model path has been provided, assign a default path
+	MODEL="../../../../fastmodel/refinfra/models/Linux64_GCC-4.9/FVP_RD_Daniel"
+	if [ ! -f "$MODEL" ]; then
+		echo "ERROR: you should set variable MODEL to point to a valid " \
+		     "RD-Daniel model binary, currently it is set to \"$MODEL\""
+		exit 1
+	fi
+fi
+
+#Path to the binary models
+PATH_TO_MODEL=$(dirname "${MODEL}")
+
+if [ $# -eq 0 ]; then
+	echo -e "$YELLOW_FONT Warning!!!!!: Continuing with default : -f busybox" >&2
+	echo -e "$YELLOW_FONT Use for more option  ${0##*/} -h|-- help $NORMAL_FONT" >&2
+	FS_TYPE="busybox";
+	NTW_ENABLE="false";
+	VIRT_IMG="false";
+	EXTRA_MODEL_PARAMS="";
+    VIRTIO_NET="false";
+fi
+
+# Display usage message and exit
+function usage_help {
+	echo -e "$GREEN_FONT usage: ${0##*/} -n <interface_name> -f <fs_type> -v <virtio_image_path> -d <sata_image_path> -a <extra_model_params>" >&2
+	echo -e "$GREEN_FONT fs_type = $RED_FONT busybox $NORMAL_FONT" >&2
+	echo -e "$GREEN_FONT network_enabled = $RED_FONT true $GREEN_FONT or $RED_FONT false $NORMAL_FONT" >&2
+	echo -e "$GREEN_FONT virtio_imag_path = Please input virtio image path $NORMAL_FONT" >&2
+	echo -e "$GREEN_FONT sata_image_path = Please input sata disk image path $NORMAL_FONT" >&2
+	echo -e "$GREEN_FONT extra_model_params = Input additional model parameters $NORMAL_FONT" >&2
+    echo -e "$GREEN_FONT smscnet = Use SMSC91c111 network interface instead of Virtio Net $NORMAL_FONT" >&2
+}
+
+while test $# -gt 0; do
+	case "$1" in
+		-h|--help)
+			usage_help
+			exit 1
+			;;
+		-f)
+			shift
+			if test $# -gt 0; then
+				FS_TYPE=$1
+			fi
+			shift
+			;;
+		-n)
+			shift
+			if test $# -gt 0; then
+				NTW_ENABLE=$1
+			fi
+			shift
+			;;
+		-v)
+			shift
+			if test $# -gt 0; then
+				VIRTIO_IMAGE_PATH=$1
+			fi
+			shift
+			;;
+		-d)
+			shift
+			if test $# -gt 0; then
+				SATADISK_IMAGE_PATH=$1
+			fi
+			shift
+			;;
+		-a)
+			shift
+			if test $# -gt 0; then
+				EXTRA_MODEL_PARAMS=$1
+			fi
+			shift
+			;;
+		-smscnet)
+			shift
+			if test $# -gt 0; then
+				VIRTIO_NET="false"
+			fi
+			shift
+			;;
+		-j)
+			shift
+			if test $# -gt 0; then
+				AUTOMATE=$1
+				MODEL_PARAMS="$MODEL_PARAMS \
+						-C css.scp.terminal_uart_aon.start_telnet=0 \
+						-C css.mcp.terminal_uart0.start_telnet=0 \
+						-C css.mcp.terminal_uart1.start_telnet=0 \
+						-C css.terminal_uart_ap.start_telnet=0 \
+						-C css.terminal_uart1_ap.start_telnet=0 \
+						-C soc.terminal_s0.start_telnet=0 \
+						-C soc.terminal_s1.start_telnet=0 \
+						-C soc.terminal_mcp.start_telnet=0 \
+						-C board.terminal_0.start_telnet=0 \
+						-C board.terminal_1.start_telnet=0 \
+						-C css.pl011_uart1_ap.out_file="ap-uart1"  \
+						-C soc.pl011_uart_mcp.out_file="soc-mcp-uart0" \
+						-C css.mcp.pl011_uart1_mcp.out_file="css-mcp_uart1" \
+						-C css.mcp.pl011_uart0_mcp.out_file="css-mcp_uart0" \
+						-C board.pl011_uart0.out_file="board-uart0" \
+						-C board.pl011_uart1.out_file="board-uart1""
+			fi
+			shift
+			;;
+		-p)
+			shift
+			shift
+			;;
+		*)
+			usage_help
+			exit 1
+			;;
+esac
+done
+
+if [[ -z $NTW_ENABLE ]]; then
+	echo -e "$RED_FONT Continue with <network_enabled> as false !!! $NORMAL_FONT" >&2
+	NTW_ENABLE="false";
+fi
+
+if [ ${NTW_ENABLE,,} == "true" ]; then
+	find_tap_interface
+	if [[ -z $TAP_INTERFACE ]]; then
+		echo -e "$YELLOW_FONT Please input a unique bridge interface name for network setup $NORMAL_FONT" >&2
+		read TAP_INTERFACE
+		if [[ -z $TAP_INTERFACE ]]; then
+			echo -e "$RED_FONT network interface name is empty $NORMAL_FONT" >&2
+			exit 1;
+		fi
+	fi
+fi
+
+if [ ${NTW_ENABLE,,} != "true" ] && [ ${NTW_ENABLE,,} != "false" ]; then
+	echo -e "$RED_FONT Unsupported <network_enabled> selected  $NORMAL_FONT" >&2
+	usage_help
+	exit 1;
+fi
+
+if [[ -z $BL1_IMAGE ]]; then
+	echo -e "$RED_FONT Continue with <BL1_IMAGE> as tf-bl1.bin !!! $NORMAL_FONT" >&2
+	BL1_IMAGE="tf-bl1.bin";
+fi
+
+if [[ -z $FIP_IMAGE ]]; then
+	echo -e "$RED_FONT Continue with <FIP_IMAGE> as fip-uefi.bin !!! $NORMAL_FONT" >&2
+	FIP_IMAGE="fip-uefi.bin";
+fi
+
+if [[ -n "$VIRTIO_IMAGE_PATH" ]]; then
+	MODEL_PARAMS="$MODEL_PARAMS \
+			-C board.virtioblockdevice.image_path=${VIRTIO_IMAGE_PATH}"
+fi
+
+if [[ -n "$SATADISK_IMAGE_PATH" ]]; then
+	MODEL_PARAMS="$MODEL_PARAMS \
+			-C pci.ahci.ahci.image_path="${SATADISK_IMAGE_PATH}""
+fi
+
+#For distribution installation and boot, ensure that the virtio devices
+#behind the PCIe RC are not enumerated.
+if [[ ! -z $FS_TYPE ]] && [ ${FS_TYPE,,} == "distro" ]; then
+	MODEL_PARAMS="$MODEL_PARAMS \
+		-C pci.pcidevice0.bus=0xFF \
+		-C pci.pcidevice1.bus=0xFF"
+fi
+
+mkdir -p ./$MODEL_TYPE
+
+if [[ ${NTW_ENABLE,,} == "true" && ${VIRTIO_NET} == "false" ]]; then
+	MODEL_PARAMS="$MODEL_PARAMS \
+		   -C board.hostbridge.interfaceName="$TAP_INTERFACE" \
+		   -C board.smsc_91c111.enabled=1"
+elif [ ${NTW_ENABLE,,} == "true" ]; then
+	MODEL_PARAMS="$MODEL_PARAMS \
+		-C board.virtio_net.hostbridge.interfaceName="$TAP_INTERFACE" \
+		-C board.virtio_net.enabled=1 \
+		-C board.virtio_net.transport="legacy" "
+fi
+
+#check whether crypto plugin exists
+if [ -e $PATH_TO_MODEL_ROOT/plugins/Linux64_GCC-4.9/Crypto.so ]; then
+	MODEL_PARAMS="$MODEL_PARAMS \
+		   --plugin $PATH_TO_MODEL_ROOT/plugins/Linux64_GCC-4.9/Crypto.so"
+fi
+
+echo "NOR1 flash image: $PWD/nor1_flash.img"
+create_nor_flash_image "$PWD/nor1_flash.img"
+echo "NOR2 flash image: $PWD/nor2_flash.img"
+create_nor_flash_image "$PWD/nor2_flash.img"
+
+echo
+echo "Starting model "$MODEL_TYPE
+echo "  MODEL_PARAMS = "$MODEL_PARAMS
+echo "  EXTRA_PARAMS = "$EXTRA_MODEL_PARAMS
+echo "  UART Log     = "$PWD/${MODEL_TYPE,,}/${UART0_ARMTF_OUTPUT_FILE_NAME}
+echo
+
+# print the model version.
+${MODEL} --version
+export FASTSIM_CMN600_INTERNAL_RNSAM=1
+
+PARAMS="-C css.cmn_rhodes.mesh_config_file=$PATH_TO_MODEL/rhodes_daniel_cfgm.yml \
+	-C css.cmn_rhodes.force_on_from_start=1 \
+	--data css.scp.armcortexm7ct=$OUTDIR/scp_ramfw.bin@0x0BD80000 \
+	-C css.mcp.ROMloader.fname=$OUTDIR/mcp_romfw.bin \
+	-C css.scp.ROMloader.fname=$OUTDIR/scp_romfw.bin \
+	-C css.trustedBootROMloader.fname=$OUTDIR/$BL1_IMAGE \
+	-C board.flashloader0.fname=$OUTDIR/$FIP_IMAGE \
+	-C board.flashloader1.fname=$PWD/nor1_flash.img \
+	-C board.flashloader1.fnameWrite=$PWD/nor1_flash.img \
+	-C board.flashloader2.fname=$PWD/nor2_flash.img \
+	-C board.flashloader2.fnameWrite=$PWD/nor2_flash.img \
+	-S -R \
+	-C css.scp.pl011_uart_scp.out_file=${MODEL_TYPE,,}/${UART0_SCP_OUTPUT_FILE_NAME} \
+	-C css.pl011_uart_ap.out_file=${MODEL_TYPE,,}/${UART0_CONSOLE_OUTPUT_FILE_NAME} \
+	-C soc.pl011_uart_mcp.out_file=${MODEL_TYPE,,}/${UART0_MCP_OUTPUT_FILE_NAME} \
+	-C soc.pl011_uart0.out_file=${MODEL_TYPE,,}/${UART0_ARMTF_OUTPUT_FILE_NAME} \
+	-C soc.pl011_uart0.unbuffered_output=1 \
+	-C soc.pl011_uart1.out_file=${MODEL_TYPE,,}/${UART1_MM_OUTPUT_FILE_NAME} \
+	-C soc.pl011_uart1.unbuffered_output=1 \
+	-C css.pl011_uart_ap.unbuffered_output=1 \
+	${MODEL_PARAMS} \
+	${EXTRA_MODEL_PARAMS}"
+
+if [ "$AUTOMATE" == "true" ] ; then
+	${MODEL} $PARAMS ${MODEL_PARAMS} ${EXTRA_MODEL_PARAMS} 2>&1 &
+else
+	${MODEL} $PARAMS ${MODEL_PARAMS} ${EXTRA_MODEL_PARAMS} 2>&1
+fi
+if [ "$?" == "0" ] ; then
+	echo "Model launched with pid: "$!
+	export MODEL_PID=$!
+else
+	echo "Failed to launch the model"
+	export MODEL_PID=0
+fi