Commit bc1f3687 authored by Pali Rohár's avatar Pali Rohár Committed by Manish Pandey
Browse files

plat: marvell: armada: a3k: Split building $(WTMI_MULTI_IMG) and $(TIMDDRTOOL)



These two targets are build by make subprocesses and are independent.
So splitting them into own targets allow make to build them in parallel.
$(TIMBUILD) script depends on $(TIMDDRTOOL) so specify it in Makefile.

Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I139fc7fe64d8de275b01a853e15bfb88c4ff840d
parent 23b1be79
......@@ -85,6 +85,9 @@ endif #MARVELL_SECURE_BOOT
TIMBUILD := $(DOIMAGEPATH)/script/buildtim.sh
TIM2IMG := $(DOIMAGEPATH)/script/tim2img.pl
TIMDDRTOOL := $(DOIMAGEPATH)/tim/ddr/ddr_tool
$(TIMBUILD): $(TIMDDRTOOL)
# WTMI_IMG is used to specify the customized RTOS image running over
# Service CPU (CM3 processor). By the default, it points to a
......@@ -125,10 +128,15 @@ $(DOIMAGETOOL): FORCE
$(Q)$(MAKE) --no-print-directory -C $(CRYPTOPP_PATH) -f GNUmakefile
$(Q)$(MAKE) --no-print-directory -C $(DOIMAGEPATH)/wtptp/src/TBB_Linux -f TBB_linux.mak LIBDIR=$(CRYPTOPP_PATH)
$(WTMI_MULTI_IMG): FORCE
$(Q)$(MAKE) --no-print-directory -C $(DOIMAGEPATH) WTMI_IMG=$(WTMI_IMG) WTMI
$(TIMDDRTOOL): FORCE
$(if $(value MV_DDR_PATH),,$(error "Platform '${PLAT}' for ddr tool requires MV_DDR_PATH. Please set MV_DDR_PATH to point to the right directory"))
$(Q)$(MAKE) --no-print-directory -C $(DOIMAGEPATH) MV_DDR_PATH=$(MV_DDR_PATH) mv_ddr
.PHONY: mrvl_flash
mrvl_flash: ${BUILD_PLAT}/${BOOT_IMAGE} ${DOIMAGETOOL}
$(if $(value MV_DDR_PATH),,$(error "Platform '${PLAT}' for target '$@' requires MV_DDR_PATH. Please set MV_DDR_PATH to point to the right directory"))
${Q}${MAKE} --no-print-directory -C ${DOIMAGEPATH} WTMI_IMG=$(WTMI_IMG) MV_DDR_PATH=$(MV_DDR_PATH)
mrvl_flash: ${BUILD_PLAT}/${BOOT_IMAGE} ${WTMI_MULTI_IMG} ${DOIMAGETOOL} ${TIMBUILD}
@echo
@echo "Building uart images"
$(TIMBUILD) $(TIMBLDUARTARGS)
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment