1. 07 Dec, 2020 6 commits
  2. 19 Nov, 2020 3 commits
    • Pali Rohár's avatar
      plat: marvell: Update SUBVERSION to match Marvell's forked version · d22db1b0
      Pali Rohár authored
      Marvell's TF-A fork has SUBVERSION set to devel-18.12.2.
      The only differences between Marvell's devel-18.12.0 and devel-18.12.2
      versions are documentation updates and cherry-picked patches from TF-A
      upstream repository.
      So upstream TF-A has already all changes from Marvell's TF-A devel-18.12.2
      fork and therefore update SUBVERSION to reflect this state.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: I5ce946a5176a5cbf124acd8037392463d586b072
    • Pali Rohár's avatar
      plat: marvell: armada: Add new target mrvl_bootimage · 91bc2da7
      Pali Rohár authored
      This new target builds boot-image.bin binary as described in documentation.
      This image does not contain WTMI image and therefore WTP repository is not
      required for building.
      Having ability to build just this boot-image.bin binary without full
      flash-image.bin is useful for A3720 Turris MOX board which does not use
      Marvell's WTP and a3700_utils.
      To reduce duplicity between a8k and a3k code, define this new target and
      also definitions for $(BUILD_PLAT)/$(BOOT_IMAGE) in common include file
      For this purpose it is needed to include plat/marvell/marvell.mk file from
      a3700_common.mk unconditionally (and not only when WTP is defined). Now
      when common file plat/marvell/marvell.mk does not contain definition for
      building $(DOIMAGETOOL), it is possible to move its inclusion at the top of
      the a3700_common.mk file.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: Ic58303b37a1601be9a06ff83b7a279cb7cfc8280
    • Pali Rohár's avatar
      plat: marvell: armada: a3k: Add support for building $(DOIMAGETOOL) · c6a7ab77
      Pali Rohár authored
      Current binary wtptp/linux/tbb_linux which is specified in $(DOIMAGETOOL)
      variable points to external pre-compiled Marvell x86_64 ELF linux binary
      from A3700-utils-marvell WTP repository.
      It means that currently it is not possible to compile TF-A for A3720 on
      other host platform then linux x86_64.
      Part of the A3700-utils-marvell WTP repository is also source code of
      $(DOIMAGETOOL) TBB_Linux tool.
      This change adds support for building $(DOIMAGETOOL) also for a3k platform.
      After running $(MAKE) at appropriate subdirectory of A3700-utils-marvell
      WTP repository, compiled TBB_linux tool will appear in WTP subdirectory
      wtptp/src/TBB_Linux/release/. So update also $(DOIMAGETOOL) variable to
      point to the correct location where TBB_linux was built.
      To build TBB_linux it is required to compile external Crypto++ library
      which is available at: https://github.com/weidai11/cryptopp.git
      User needs to set CRYPTOPP_PATH option to specify path to that library.
      After this change it is now possible to build whole firmware for A3720
      platform without requirement to use pre-compiled/proprietary x86_64
      executable binaries from Marvell.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: I6f26bd4356778a2f8f730a223067a2e550e6c8e0
  3. 21 Oct, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Building ${DOIMAGETOOL} is only for a8k · b5e3d540
      Pali Rohár authored
      Currently a3k target is misusing ${DOIMAGETOOL} target for building flash
      and UART images. It is not used for building image tool.
      So move ${DOIMAGETOOL} target from common marvell include file into a8k
      include file and add correct invocation of ${MAKE} into a3k for building
      flash and UART images.
      Part of this change is also checks that MV_DDR_PATH for a3k was specified
      by user as this option is required for building a3k flash and UART images.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: I5ae9d08b8505460933f17836c9b6435fd6e51bb6
  4. 19 Oct, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Fix including plat/marvell/marvell.mk file · 0412b732
      Pali Rohár authored
      Include file plat/marvell/marvell.mk for platform A3700 was included two
      times. Once from file plat/marvell/armada/a3k/common/a3700_common.mk and
      second time from common file plat/marvell/armada/common/marvell_common.mk.
      It caused following warning every time was make called:
          plat/marvell/marvell.mk:51: warning: overriding recipe for target 'mrvl_clean'
          plat/marvell/marvell.mk:51: warning: ignoring old recipe for target 'mrvl_clean'
      Change in this commit removes inclusion of plat/marvell/marvell.mk file in
      common file plat/marvell/armada/common/marvell_common.mk. As a80x0 platform
      needs this include file, add it also into a80x0 platform specific include
      file lat/marvell/armada/a8k/common/a8k_common.mk.
      Also moves inclusion of plat/marvell/marvell.mk file in a3700 platform file
      plat/marvell/armada/a3k/common/a3700_common.mk at correct place. Global
      plat/marvell/marvell.mk expects that variables DOIMAGEPATH and DOIMAGETOOL
      are already defined, but it defines MARVELL_SECURE_BOOT variable which is
      needed by plat/marvell/armada/a3k/common/a3700_common.mk.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: I5cbbd7eb8a3376924419f9850516b2a4924be5aa
  5. 16 Oct, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Fix dependences for target fip · fb28d525
      Pali Rohár authored
      For building fip image it is not needed to build target mrvl_flash. This
      fip image contains only bl2, bl31 and bl33 (u-boot.bin) images and
      therefore it does not depend on Marvell wtmi and wtp A3700-utils.
      So remove mrvl_flash dependency for fip target to allow building fip image
      without need to build mrvl_flash and therefore specify and provide Marvell
      wmi and wtp A3700-utils.
      This changes fixes compilation of fip image for A3700 platform by command:
          make CROSS_COMPILE=aarch64-linux-gnu- BL33=/path/u-boot/u-boot.bin \
               DEBUG=0 LOG_LEVEL=0 USE_COHERENT_MEM=0 PLAT=a3700 fip
      Marvell boot image can be still build by 'mrvl_flash' target.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: Iba9a9da5be6fd1da23407fc2d490aedcb1a292c9
  6. 15 Oct, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: a3k: When WTP is empty do not define variables and... · c5e1b061
      Pali Rohár authored
      plat: marvell: armada: a3k: When WTP is empty do not define variables and targets which depends on it
      Some of targets (e.g. mrvl_flash) depends on WTP build option. Other
      targets (e.g. fip) can be build also without WTP build option as they do
      not depend on it.
      This change put all A3720 variables and targets which depends on WTP into
      conditional if-endif section, so they are not defined when user has not
      supplied WTP build option.
      Target mrvl_flash is defined also when WTP was not specified and in this
      case it just print error message to help user.
      Variables which do not depend on WTP are moved to the top of
      a3700_common.mk file.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: Idb3892233586a0afca3e0e6564279641d2e4b960
  7. 09 Oct, 2020 1 commit
    • Jimmy Brisson's avatar
      Don't return error information from console_flush · 831b0e98
      Jimmy Brisson authored
      And from crash_console_flush.
      We ignore the error information return by console_flush in _every_
      place where we call it, and casting the return type to void does not
      work around the MISRA violation that this causes. Instead, we collect
      the error information from the driver (to avoid changing that API), and
      don't return it to the caller.
      Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
      Signed-off-by: default avatarJimmy Brisson <jimmy.brisson@arm.com>
  8. 04 Oct, 2020 5 commits
  9. 04 Aug, 2020 1 commit
    • Grant Likely's avatar
      Use abspath to dereference $BUILD_BASE · 29214e95
      Grant Likely authored
      If the user tries to change BUILD_BASE to put the build products outside
      the build tree the compile will fail due to hard coded assumptions that
      $BUILD_BASE is a relative path. Fix by using $(abspath $(BUILD_BASE))
      to rationalize to an absolute path every time and remove the relative
      path assumptions.
      This patch also adds documentation that BUILD_BASE can be specified by
      the user.
      Signed-off-by: Grant Likely's avatarGrant Likely <grant.likely@arm.com>
      Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
      Change-Id: Ib1af874de658484aaffc672f30029b852d2489c8
  10. 30 Jul, 2020 6 commits
    • Grzegorz Jaszczyk's avatar
      plat: marvell: octeontx: add support for t9130 · 2c9d2636
      Grzegorz Jaszczyk authored
      CN-9130 has single CP0 inside the package and 2 additional one from MoChi
      interface. In case of db-9130-modular board the MCI interface is routed to:
      - on-board CP115 (MCI0)
      - extension board CP115 (MCI1)
      The board is based on DIMM DDR.
      The 9130 has up to 3CP, and decoding windows looks like below:
        (free for further use)
       .----------. 0xf800 0000
       | CP2 CFG  |
       '----------' 0xf600 0000
       | CP1 CFG  |
       '----------' 0xf400 0000
       | CP0 CFG  |
       '----------' 0xf200 0000
       | AP CFG   |
       '----------' 0xf000 0000
        (free for further use)
       .----------. 0xec00 0000
       | SPI      |
       | MEM_MAP  | (Currently not opened)
       '----------' 0xe800 0000
       | PEX2_CP2 |
       '----------' 0xe700 0000
       | PEX1_CP2 |
       '----------' 0xe600 0000
       | PEX0-CP2 |
       .----------. 0xe500 0000
       | PEX2_CP1 |
       '----------' 0xe400 0000
       | PEX1_CP1 |
       '----------' 0xe300 0000
       | PEX0-CP1 |
       .----------. 0xe200 0000
       | PEX2-CP0 |
       '----------' 0xe100 0000
       | PEX1-CP0 |
       '----------' 0xe000 0000
       | PEX0-CP0 |
       | 512MB    |
       '----------' 0xc000 0000
      Change-Id: Ia8eee4f96c1043753f74f9da437b9f72ce2d6eb0
      Signed-off-by: default avatarGrzegorz Jaszczyk <jaz@semihalf.com>
    • Alex Evraev's avatar
      plat: marvell: t9130: add SVC support · 12c66c6b
      Alex Evraev authored
      As the preparation for adding the CN913x SoC family support
      introduce code that enable SVC and the frequency handling
      specific for the AP807 North Bridge.
      Change-Id: Ibe34a511b49cd9671a2e53b77bdcfc644bb915e3
      Signed-off-by: default avatarAlex Evraev <alexev@marvell.com>
    • Grzegorz Jaszczyk's avatar
      plat: marvell: t9130: update AVS settings · 885cd821
      Grzegorz Jaszczyk authored
      Update AVS settings and remove unused macros.
      This is a preparation patch for adding CN913x SoC
      family support.
      Change-Id: Ib1dd70885a316ed5763d0f4730d0e4734da117b7
      Signed-off-by: default avatarGrzegorz Jaszczyk <jaz@semihalf.com>
    • Ben Peled's avatar
      plat: marvell: t9130: pass actual CP count for load_image · 5bc3643e
      Ben Peled authored
      Add CN913x case to bl2_plat_get_cp_count.
      Fix loading of cp1/2 image. This is a preparation
      patch for adding CN913x SoC family support.
      Change-Id: Id84a30203d20572fc0dfd3f91ea395c199a85fe9
      Signed-off-by: default avatarBen Peled <bpeled@marvell.com>
    • Alex Evraev's avatar
      plat: marvell: armada: a7k: add support to SVC validation mode · ebf307bf
      Alex Evraev authored
      Add support for “AVS reduction” feature at this mode for
      7040 Dual Cluster operation mode at CPU=1600MHz
      Change-Id: Ia72b10e0ccfad07568bf4c089ea3990173ae24b2
      Signed-off-by: default avatarAlex Evraev <alexev@marvell.com>
    • Moti Buskila's avatar
      plat: marvell: armada: add support for twin-die combined memory device · 48270689
      Moti Buskila authored
      the twin-die combined memory device should be treated as
      X8 device and not as X16 one. This patch is required to
      re-enable compilation after BLE (mv-ddr-marvell) firmware upgrade.
      Change-Id: I41257ff2825164ebca85a84bbb8462d7b3447b97
      Signed-off-by: default avatarMoti Buskila <motib@marvell.com>
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
  11. 10 Jul, 2020 6 commits
  12. 03 Jul, 2020 2 commits
  13. 19 Jun, 2020 6 commits