1. 07 Dec, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Add missing FORCE, .PHONY and clean targets · e4bbd39c
      Pali Rohár authored
      
      
      FORCE target is used as a dependency for other file targets which needs to
      be always rebuilt. .PHONY target is standard Makefile target which specify
      non-file targets and therefore needs to be always rebuilt.
      
      Targets clean, realclean and distclean are .PHONY targets used to remove
      built files. Correctly set that mrvl_clean target is prerequisite for these
      clean targets to ensure that built files are removed.
      
      Finally this change with usage of FORCE target allows to remove mrvl_clean
      hack from the prerequisites of a8k ${DOIMAGETOOL} target which was used
      just to ensure that ${DOIMAGETOOL} is always rebuilt via make subprocess.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: I2fa8971244b43f101d846fc433ef7b0b6f139c92
      e4bbd39c
  2. 19 Nov, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Add new target mrvl_bootimage · 91bc2da7
      Pali Rohár authored
      
      
      This new target builds boot-image.bin binary as described in documentation.
      This image does not contain WTMI image and therefore WTP repository is not
      required for building.
      
      Having ability to build just this boot-image.bin binary without full
      flash-image.bin is useful for A3720 Turris MOX board which does not use
      Marvell's WTP and a3700_utils.
      
      To reduce duplicity between a8k and a3k code, define this new target and
      also definitions for $(BUILD_PLAT)/$(BOOT_IMAGE) in common include file
      marvell_common.mk.
      
      For this purpose it is needed to include plat/marvell/marvell.mk file from
      a3700_common.mk unconditionally (and not only when WTP is defined). Now
      when common file plat/marvell/marvell.mk does not contain definition for
      building $(DOIMAGETOOL), it is possible to move its inclusion at the top of
      the a3700_common.mk file.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: Ic58303b37a1601be9a06ff83b7a279cb7cfc8280
      91bc2da7
  3. 21 Oct, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Building ${DOIMAGETOOL} is only for a8k · b5e3d540
      Pali Rohár authored
      
      
      Currently a3k target is misusing ${DOIMAGETOOL} target for building flash
      and UART images. It is not used for building image tool.
      
      So move ${DOIMAGETOOL} target from common marvell include file into a8k
      include file and add correct invocation of ${MAKE} into a3k for building
      flash and UART images.
      
      Part of this change is also checks that MV_DDR_PATH for a3k was specified
      by user as this option is required for building a3k flash and UART images.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: I5ae9d08b8505460933f17836c9b6435fd6e51bb6
      b5e3d540
  4. 19 Oct, 2020 1 commit
    • Pali Rohár's avatar
      plat: marvell: armada: Fix including plat/marvell/marvell.mk file · 0412b732
      Pali Rohár authored
      
      
      Include file plat/marvell/marvell.mk for platform A3700 was included two
      times. Once from file plat/marvell/armada/a3k/common/a3700_common.mk and
      second time from common file plat/marvell/armada/common/marvell_common.mk.
      
      It caused following warning every time was make called:
      
          plat/marvell/marvell.mk:51: warning: overriding recipe for target 'mrvl_clean'
          plat/marvell/marvell.mk:51: warning: ignoring old recipe for target 'mrvl_clean'
      
      Change in this commit removes inclusion of plat/marvell/marvell.mk file in
      common file plat/marvell/armada/common/marvell_common.mk. As a80x0 platform
      needs this include file, add it also into a80x0 platform specific include
      file lat/marvell/armada/a8k/common/a8k_common.mk.
      
      Also moves inclusion of plat/marvell/marvell.mk file in a3700 platform file
      plat/marvell/armada/a3k/common/a3700_common.mk at correct place. Global
      plat/marvell/marvell.mk expects that variables DOIMAGEPATH and DOIMAGETOOL
      are already defined, but it defines MARVELL_SECURE_BOOT variable which is
      needed by plat/marvell/armada/a3k/common/a3700_common.mk.
      Signed-off-by: default avatarPali Rohár <pali@kernel.org>
      Change-Id: I5cbbd7eb8a3376924419f9850516b2a4924be5aa
      0412b732
  5. 10 Jul, 2020 1 commit
  6. 03 Jul, 2020 1 commit
  7. 19 Jun, 2020 1 commit
  8. 06 Jun, 2020 2 commits
  9. 03 Jun, 2020 1 commit
    • Marcin Wojtas's avatar
      marvell: a8k: enable BL31 cache by default · 03363af8
      Marcin Wojtas authored
      
      
      BL31_CACHE_DISABLE flag was introduced as a work-around
      for the older SoC revisions. Since it is not relevant in the
      newest versions, toggle it to be disabled by default.
      One can still specify it by adding 'BL31_CACHE_DISABLE=1'
      string to the build command.
      
      Change-Id: I11b52dade3ff7f8ee643b8078c6e447c45946570
      Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
      03363af8
  10. 15 Jan, 2020 1 commit
    • Luka Kovacic's avatar
      a8k: Implement platform specific power off · 8c11ebfc
      Luka Kovacic authored
      
      
      Implements a way to add platform specific power off code to a
      Marvell Armada 8K platform.
      
      Marvell Armada 8K boards can now add a board/system_power.c file
      that contains a system_power_off() function.
      This function can now send a command to a power management MCU or
      other board periferals before shutting the board down.
      Signed-off-by: default avatarLuka Kovacic <luka.kovacic@sartura.hr>
      Cc: Luka Perkov <luka.perkov@sartura.hr>
      Change-Id: Iaba20bc2f603195679c54ad12c0c18962dd8e3db
      ---
      I am working on a device that will be ported later, which has a
      custom power management MCU that handles LEDs, board power and fans
      and requires this separation.
      8c11ebfc
  11. 01 Feb, 2019 1 commit
  12. 04 Jan, 2019 1 commit
    • Antonio Nino Diaz's avatar
      Sanitise includes across codebase · 09d40e0e
      Antonio Nino Diaz authored
      Enforce full include path for includes. Deprecate old paths.
      
      The following folders inside include/lib have been left unchanged:
      
      - include/lib/cpus/${ARCH}
      - include/lib/el3_runtime/${ARCH}
      
      The reason for this change is that having a global namespace for
      includes isn't a good idea. It defeats one of the advantages of having
      folders and it introduces problems that are sometimes subtle (because
      you may not know the header you are actually including if there are two
      of them).
      
      For example, this patch had to be created because two headers were
      called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
      to avoid collision."). More recently, this patch has had similar
      problems: 46f9b2c3 ("drivers: add tzc380 support").
      
      This problem was introduced in commit 4ecca339 ("Move include and
      source files to logical locations"). At that time, there weren't too
      many headers so it wasn't a real issue. However, time has shown that
      this creates problems.
      
      Platforms t...
      09d40e0e
  13. 07 Dec, 2018 1 commit
    • Julius Werner's avatar
      drivers/console: Link console framework code by default · 985ee0b7
      Julius Werner authored
      
      
      This patch makes the build system link the console framework code by
      default, like it already does with other common libraries (e.g. cache
      helpers). This should not make a difference in practice since TF is
      linked with --gc-sections, so the linker will garbage collect all
      functions and data that are not referenced by any other code. Thus, if a
      platform doesn't want to include console code for size reasons and
      doesn't make any references to console functions, the code will not be
      included in the final binary.
      
      To avoid compatibility issues with older platform ports, only make this
      change for the MULTI_CONSOLE_API.
      
      Change-Id: I153a9dbe680d57aadb860d1c829759ba701130d3
      Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
      985ee0b7
  14. 04 Dec, 2018 2 commits
  15. 15 Nov, 2018 1 commit
  16. 22 Oct, 2018 1 commit
  17. 18 Oct, 2018 1 commit
    • Grzegorz Jaszczyk's avatar
      mvebu: cp110: introduce COMPHY porting layer · 42a29337
      Grzegorz Jaszczyk authored
      
      
      Some of COMPHY parameters depends on the hw connection between the SoC
      and the PHY, which can vary on different boards e.g. due to different
      wires length. Define the "porting layer" with some defaults
      parameters. It ease updating static values which needs to be updated due
      to board differences, which are now grouped in one place.
      
      Example porting layer for a8k-db is under:
      plat/marvell/a8k/a80x0/board/phy-porting-layer.h
      
      If for some boards parameters are not defined (missing
      phy-porting-layer.h), the default values are used
      (drivers/marvell/comphy/phy-default-porting-layer.h)
      and the following compilation warning is show:
      "Using default comphy params - you may need to suit them to your board".
      
      The common COMPHY driver code is extracted in order to be shared with
      future COMPHY driver for A3700 SoC platforms
      Signed-off-by: default avatarGrzegorz Jaszczyk <jaz@semihalf.com>
      Signed-off-by: default avatarIgal Liberman <igall@marvell.com>
      Signed-off-by: default avatarKonstantin Porotchkin <kostap@marvell.com>
      42a29337
  18. 03 Oct, 2018 1 commit
    • Konstantin Porotchkin's avatar
      marvell: Move BLE from external repo to the platform folder · 37c4341b
      Konstantin Porotchkin authored
      
      
      The BLE is the pre-TF-A boot stage required by Marvell Armada
      BootROM for bringing up DRAM and allow the boot image copy to it.
      Since this is not a standard boot level and only uses the TF-A
      as a build environment, it was introduced out of source tree.
      However it turns out that such remote location introduces additional
      complexity to the upstream TF-A build process.
      In order to simplify the build environment the BLE source folder
      is relocated from the external repository to A8K platform directory.
      The build documentation is updated accordingly.
      Signed-off-by: default avatarKonstantin Porotchkin <kostap@marvell.com>
      37c4341b
  19. 28 Sep, 2018 1 commit
  20. 19 Sep, 2018 1 commit
    • Andre Przywara's avatar
      drivers: i2c: mentor: move platform code into header files · dfc0fb27
      Andre Przywara authored
      
      
      At the moment we have two I2C stub drivers (for the Allwinner and the
      Marvell platform), which #include the actual .c driver file.
      Change this into the more usual design, by renaming and moving the stub
      drivers into platform specific header files and including these from the
      actual driver file. The platform specific include directories make sure
      the driver picks up the right header automatically.
      Signed-off-by: Andre Przywara's avatarAndre Przywara <andre.przywara@arm.com>
      dfc0fb27
  21. 02 Sep, 2018 1 commit
  22. 18 Jul, 2018 1 commit