Commit 8f0cdec8 authored by Chris Packham's avatar Chris Packham Committed by Wolfram Sang
Browse files

i2c: mpc: implement erratum A-004447 workaround



The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.
Signed-off-by: default avatarChris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: default avatarWolfram Sang <wsa@kernel.org>
parent 19ae697a
......@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/fsl_devices.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
......@@ -45,6 +46,7 @@
#define CCR_MTX 0x10
#define CCR_TXAK 0x08
#define CCR_RSTA 0x04
#define CCR_RSVD 0x02
#define CSR_MCF 0x80
#define CSR_MAAS 0x40
......@@ -97,7 +99,7 @@ struct mpc_i2c {
u32 block;
int rc;
int expect_rxack;
bool has_errata_A004447;
};
struct mpc_i2c_divider {
......@@ -136,6 +138,75 @@ static void mpc_i2c_fixup(struct mpc_i2c *i2c)
}
}
static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
{
void __iomem *addr = i2c->base + MPC_I2C_SR;
u8 val;
return readb_poll_timeout(addr, val, val & mask, 0, 100);
}
/*
* Workaround for Erratum A004447. From the P2040CE Rev Q
*
* 1. Set up the frequency divider and sampling rate.
* 2. I2CCR - a0h
* 3. Poll for I2CSR[MBB] to get set.
* 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
* step 5. If MAL is not set, then go to step 13.
* 5. I2CCR - 00h
* 6. I2CCR - 22h
* 7. I2CCR - a2h
* 8. Poll for I2CSR[MBB] to get set.
* 9. Issue read to I2CDR.
* 10. Poll for I2CSR[MIF] to be set.
* 11. I2CCR - 82h
* 12. Workaround complete. Skip the next steps.
* 13. Issue read to I2CDR.
* 14. Poll for I2CSR[MIF] to be set.
* 15. I2CCR - 80h
*/
static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
{
int ret;
u32 val;
writeccr(i2c, CCR_MEN | CCR_MSTA);
ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
if (ret) {
dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
return;
}
val = readb(i2c->base + MPC_I2C_SR);
if (val & CSR_MAL) {
writeccr(i2c, 0x00);
writeccr(i2c, CCR_MSTA | CCR_RSVD);
writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
if (ret) {
dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
return;
}
val = readb(i2c->base + MPC_I2C_DR);
ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
if (ret) {
dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
return;
}
writeccr(i2c, CCR_MEN | CCR_RSVD);
} else {
val = readb(i2c->base + MPC_I2C_DR);
ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
if (ret) {
dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
return;
}
writeccr(i2c, CCR_MEN);
}
}
#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
......@@ -670,7 +741,10 @@ static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
{
struct mpc_i2c *i2c = i2c_get_adapdata(adap);
mpc_i2c_fixup(i2c);
if (i2c->has_errata_A004447)
mpc_i2c_fixup_A004447(i2c);
else
mpc_i2c_fixup(i2c);
return 0;
}
......@@ -767,6 +841,9 @@ static int fsl_i2c_probe(struct platform_device *op)
}
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
i2c->has_errata_A004447 = true;
i2c->adap = mpc_ops;
scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
"MPC adapter (%s)", of_node_full_name(op->dev.of_node));
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment