Commit 3cff00d9 authored by Michael Krufky's avatar Michael Krufky Committed by Linus Torvalds
Browse files

[PATCH] dvb: Add ATSC support for DViCO FusionHDTV5 Lite



Added ATSC support for DViCO FusionHDTV5 Lite.

Signed-off-by: default avatarMichael Krufky <mkrufky@m1k.net>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 37650221
......@@ -6,10 +6,12 @@ config DVB_BT8XX
select DVB_NXT6000
select DVB_CX24110
select DVB_OR51211
select DVB_LGDT330X
help
Support for PCI cards based on the Bt8xx PCI bridge. Examples are
the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
the pcHDTV HD2000 cards, and certain AVerMedia cards.
the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and
some AVerMedia cards.
Since these cards have no MPEG decoder onboard, they transmit
only compressed MPEG data over the PCI bus, so you need
......
......@@ -34,6 +34,7 @@
#include "dvb_frontend.h"
#include "dvb-bt8xx.h"
#include "bt878.h"
#include "dvb-pll.h"
static int debug;
......@@ -546,6 +547,55 @@ static struct mt352_config digitv_alps_tded4_config = {
.pll_set = digitv_alps_tded4_pll_set,
};
static int tdvs_tua6034_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
u8 buf[4];
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
int err;
dvb_pll_configure(&dvb_pll_tdvs_tua6034, buf, params->frequency, 0);
dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n",
__FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]);
if ((err = i2c_transfer(card->i2c_adapter, &msg, 1)) != 1) {
printk(KERN_WARNING "dvb-bt8xx: %s error "
"(addr %02x <- %02x, err = %i)\n",
__FUNCTION__, buf[0], buf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
/* Set the Auxiliary Byte. */
buf[2] &= ~0x20;
buf[2] |= 0x18;
buf[3] = 0x50;
i2c_transfer(card->i2c_adapter, &msg, 1);
return 0;
}
static struct lgdt330x_config tdvs_tua6034_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
.pll_set = tdvs_tua6034_pll_set,
};
static void lgdt330x_reset(struct dvb_bt8xx_card *bt)
{
/* Set pin 27 of the lgdt3303 chip high to reset the frontend */
/* Pulse the reset line */
bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */
msleep(100);
bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */
msleep(100);
}
static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
{
int ret;
......@@ -562,6 +612,15 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
break;
#endif
#ifdef BTTV_DVICO_FUSIONHDTV_5_LITE
case BTTV_DVICO_FUSIONHDTV_5_LITE:
lgdt330x_reset(card);
card->fe = lgdt330x_attach(&tdvs_tua6034_config, card->i2c_adapter);
if (card->fe != NULL)
dprintk ("dvb_bt8xx: lgdt330x detected\n");
break;
#endif
#ifdef BTTV_TWINHAN_VP3021
case BTTV_TWINHAN_VP3021:
#else
......@@ -765,6 +824,14 @@ static int dvb_bt8xx_probe(struct device *dev)
* DA_APP(parallel) */
break;
#ifdef BTTV_DVICO_FUSIONHDTV_5_LITE
case BTTV_DVICO_FUSIONHDTV_5_LITE:
#endif
card->gpio_mode = 0x0400c060;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR;
break;
#ifdef BTTV_TWINHAN_VP3021
case BTTV_TWINHAN_VP3021:
#else
......
......@@ -35,6 +35,7 @@
#include "nxt6000.h"
#include "cx24110.h"
#include "or51211.h"
#include "lgdt330x.h"
struct dvb_bt8xx_card {
struct semaphore lock;
......
......@@ -26,6 +26,7 @@
* DViCO FusionHDTV 3 Gold-Q
* DViCO FusionHDTV 3 Gold-T
* DViCO FusionHDTV 5 Gold
* DViCO FusionHDTV 5 Lite
*
* TODO:
* signal strength always returns 0.
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment