Commit 404c1ff6 authored by Stephen Boyd's avatar Stephen Boyd
Browse files

clk: qcom: Support bypass RCG configuration



In the case of HDMI clocks, we want to bypass the RCG's ability
to divide the output clock and pass through the parent HDMI PLL
rate. Add a simple set of clk_ops to configure the RCG to do
this. This removes the need to keep adding more frequency entries
to the tv_src clock whenever we want to support a new rate.
Tested-by: default avatarRob Clark <robdclark@gmail.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 24d8fba4
......@@ -417,20 +417,25 @@ static long clk_dyn_rcg_determine_rate(struct clk_hw *hw, unsigned long rate,
return _freq_tbl_determine_rate(hw, rcg->freq_tbl, rate, p_rate, p);
}
static int clk_rcg_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
static long clk_rcg_bypass_determine_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *p_rate, struct clk **p)
{
struct clk_rcg *rcg = to_clk_rcg(hw);
const struct freq_tbl *f;
const struct freq_tbl *f = rcg->freq_tbl;
*p = clk_get_parent_by_index(hw->clk, f->src);
*p_rate = __clk_round_rate(*p, rate);
return *p_rate;
}
static int __clk_rcg_set_rate(struct clk_rcg *rcg, const struct freq_tbl *f)
{
u32 ns, md, ctl;
struct mn *mn = &rcg->mn;
u32 mask = 0;
unsigned int reset_reg;
f = find_freq(rcg->freq_tbl, rate);
if (!f)
return -EINVAL;
if (rcg->mn.reset_in_cc)
reset_reg = rcg->clkr.enable_reg;
else
......@@ -466,6 +471,27 @@ static int clk_rcg_set_rate(struct clk_hw *hw, unsigned long rate,
return 0;
}
static int clk_rcg_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_rcg *rcg = to_clk_rcg(hw);
const struct freq_tbl *f;
f = find_freq(rcg->freq_tbl, rate);
if (!f)
return -EINVAL;
return __clk_rcg_set_rate(rcg, f);
}
static int clk_rcg_bypass_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_rcg *rcg = to_clk_rcg(hw);
return __clk_rcg_set_rate(rcg, rcg->freq_tbl);
}
static int __clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate)
{
struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw);
......@@ -503,6 +529,17 @@ const struct clk_ops clk_rcg_ops = {
};
EXPORT_SYMBOL_GPL(clk_rcg_ops);
const struct clk_ops clk_rcg_bypass_ops = {
.enable = clk_enable_regmap,
.disable = clk_disable_regmap,
.get_parent = clk_rcg_get_parent,
.set_parent = clk_rcg_set_parent,
.recalc_rate = clk_rcg_recalc_rate,
.determine_rate = clk_rcg_bypass_determine_rate,
.set_rate = clk_rcg_bypass_set_rate,
};
EXPORT_SYMBOL_GPL(clk_rcg_bypass_ops);
const struct clk_ops clk_dyn_rcg_ops = {
.enable = clk_enable_regmap,
.is_enabled = clk_is_enabled_regmap,
......
......@@ -95,6 +95,7 @@ struct clk_rcg {
};
extern const struct clk_ops clk_rcg_ops;
extern const struct clk_ops clk_rcg_bypass_ops;
#define to_clk_rcg(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg, clkr)
......
......@@ -1218,12 +1218,7 @@ static const char *mmcc_pxo_hdmi[] = {
};
static struct freq_tbl clk_tbl_tv[] = {
{ 25200000, P_HDMI_PLL, 1, 0, 0 },
{ 27000000, P_HDMI_PLL, 1, 0, 0 },
{ 27030000, P_HDMI_PLL, 1, 0, 0 },
{ 74250000, P_HDMI_PLL, 1, 0, 0 },
{ 108000000, P_HDMI_PLL, 1, 0, 0 },
{ 148500000, P_HDMI_PLL, 1, 0, 0 },
{ .src = P_HDMI_PLL, .pre_div = 1 },
{ }
};
......@@ -1254,7 +1249,7 @@ static struct clk_rcg tv_src = {
.name = "tv_src",
.parent_names = mmcc_pxo_hdmi,
.num_parents = 2,
.ops = &clk_rcg_ops,
.ops = &clk_rcg_bypass_ops,
.flags = CLK_SET_RATE_PARENT,
},
},
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment