Commit 5e7b9212 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'docs-broken-links' of git://

Pull documentation fixes from Mauro Carvalho Chehab:
 "This solves a series of broken links for files under Documentation,
  and improves a script meant to detect such broken links (see

  The changes on this series are:

   - can.rst: fix a footnote reference;

   - crypto_engine.rst: Fix two parsing warnings;

   - Fix a lot of broken references to Documentation/*;

   - improve the scripts/documentation-file-ref-check script, in order
     to help detecting/fixing broken references, preventing

  After this patch series, only 33 broken references to doc files are
  detected by scripts/documentation-file-ref-check"

* tag 'docs-broken-links' of git:// (26 commits)
  fix a series of Documentation/ broken file name references
  Documentation: fix a broken reference
  ABI: sysfs-devices-system-cpu: remove a broken reference
  devicetree: fix a series of wrong file references
  devicetree: fix name of pinctrl-bindings.txt
  devicetree: fix some bindings file names
  MAINTAINERS: fix location of DT npcm files
  MAINTAINERS: fix location of some display DT bindings
  kernel-parameters.txt: fix pointers to sound parameters
  bindings: nvmem/zii: Fix location of nvmem.txt
  docs: Fix more broken references
  scripts/documentation-file-ref-check: check tools/*/Documentation
  scripts/documentation-file-ref-check: get rid of false-positives
  scripts/documentation-file-ref-check: hint: dash or underline
  scripts/documentation-file-ref-check: add a fix logic for DT
  scripts/documentation-file-ref-check: accept more wildcards at filenames
  scripts/documentation-file-ref-check: fix help message
  media: max2175: fix location of driver's companion documentation
  media: v4l: fix broken video4linux docs locations
  media: dvb: point to the location of the old README.dvb-usb file
parents dbb2816f 44348e8a
......@@ -11,7 +11,7 @@ Description:
Kernel code may export it for complete or partial access.
GPIOs are identified as they are inside the kernel, using integers in
the range 0..INT_MAX. See Documentation/gpio/gpio.txt for more information.
the range 0..INT_MAX. See Documentation/gpio for more information.
/export ... asks the kernel to export a GPIO to userspace
......@@ -238,9 +238,6 @@ Description: Discover and change clock speed of CPUs
See files in Documentation/cpu-freq/ for more information.
In particular, read Documentation/cpu-freq/user-guide.txt
to learn how to control the knobs.
What: /sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus
Date: June 2013
......@@ -256,7 +256,7 @@
(may crash computer or cause data corruption)
See Documentation/sound/alsa/alsa-parameters.txt
See Documentation/sound/alsa-configuration.rst
alignment= [KNL,ARM]
Allow the default userspace alignment fault handler
......@@ -2926,9 +2926,6 @@
This will also cause panics on machine check exceptions.
Useful together with panic=30 to trigger a reboot.
See Documentation/sound/oss/oss-parameters.txt
page_owner= [KNL] Boot-time page_owner enabling option.
Storage of the information about who allocated
each page is disabled in default. With this switch,
......@@ -4335,7 +4332,7 @@
[FTRACE] Set and start specified trace events in order
to facilitate early boot debugging. The event-list is a
comma separated list of trace events to enable. See
also Documentation/trace/events.txt
also Documentation/trace/events.rst
[FTRACE] Enable or disable tracer options at boot.
......@@ -4350,7 +4347,7 @@
See also Documentation/trace/ftrace.txt "trace options"
See also Documentation/trace/ftrace.rst "trace options"
......@@ -8,11 +8,13 @@ The crypto engine API (CE), is a crypto queue manager.
You have to put at start of your tfm_ctx the struct crypto_engine_ctx
struct your_tfm_ctx {
You have to put at start of your tfm_ctx the struct crypto_engine_ctx::
struct your_tfm_ctx {
struct crypto_engine_ctx enginectx;
Why: Since CE manage only crypto_async_request, it cannot know the underlying
request_type and so have access only on the TFM.
So using container_of for accessing __ctx is impossible.
......@@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
Each subnode should use the binding described in [2]..[7]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
Required properties:
......@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
that is used.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/gate-clock.txt
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
Required properties:
......@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
clock) and hardware autoidle enable / disable.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/gate-clock.txt
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
Required properties:
- compatible : shall be one of:
......@@ -8,7 +8,7 @@ Required properties:
"intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
source (usually MAINPLL) when the original CPU PLL is under
transition and not stable yet.
Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
generic clock consumer properties.
- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
for detail.
......@@ -12,7 +12,7 @@ Required properties:
- clocks: Phandles for clock specified in "clock-names" property
- clock-names : The name of clock used by the DFI, must be
- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt
for details.
- center-supply: DMC supply node.
- status: Marks the node enabled/disabled.
......@@ -30,7 +30,7 @@ Optional properties:
- nxp,calib-gpios: calibration GPIO, which must correspond with the
gpio used for the TDA998x interrupt pin.
[1] Documentation/sound/alsa/soc/DAI.txt
[1] Documentation/sound/soc/dai.rst
[2] include/dt-bindings/display/tda998x.h
......@@ -34,7 +34,7 @@ Optional properties:
- mali-supply : Phandle to regulator for the Mali device. Refer to
Documentation/devicetree/bindings/regulator/regulator.txt for details.
- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
for details.
......@@ -44,7 +44,7 @@ Optional properties:
- memory-region:
Memory region to allocate from, as defined in
- mali-supply:
Phandle to regulator for the Mali device, as defined in
......@@ -12,7 +12,7 @@ Additional documentation for F11 can be found at:
Optional Touch Properties:
Description in Documentation/devicetree/bindings/input/touch
Description in Documentation/devicetree/bindings/input/touchscreen
- touchscreen-inverted-x
- touchscreen-inverted-y
- touchscreen-swapped-x-y
......@@ -28,7 +28,7 @@ Deprecated properties:
This property is deprecated. Instead, a 'steps-per-period ' value should
be used, such as "rotary-encoder,steps-per-period = <2>".
See Documentation/input/rotary-encoder.txt for more information.
See Documentation/input/devices/rotary-encoder.rst for more information.
......@@ -28,7 +28,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num)
must be defined for each tsin child node.
- pinctrl-0 : phandle referencing pin configuration for this tsin configuration
See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Required properties (tsin (child) node):
......@@ -46,7 +46,7 @@ is required:
Following properties are require if pin control setting is required
at boot.
- pinctrl-names: A pinctrl state named "default" be defined, using the
bindings in pinctrl/pinctrl-binding.txt.
bindings in pinctrl/pinctrl-bindings.txt.
- pinctrl[0...n]: Properties to contain the phandle that refer to
different nodes of pin control settings. These nodes represents
the pin control setting of state 0 to state n. Each of these
......@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
It is interfaced to host controller using SPI interface by a proprietary hardware
called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
See the following for pwarp node definitions:
This document describes the binding for MFD device and its sub module.
......@@ -8,8 +8,8 @@ Required properties:
- reg: The PRCM registers range
The prcm node may contain several subdevices definitions:
- see Documentation/devicetree/clk/sunxi.txt for clock devices
- see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
- see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices
- see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
controller devices
......@@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
rest of the gpios (depending on the bus-width property) are the data lines in
no particular order. The format of the gpio specifier depends on the gpio
(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
......@@ -12,7 +12,7 @@ Required properties:
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment