Commit 5f273c0d authored by Codrin Ciubotariu's avatar Codrin Ciubotariu Committed by Stephen Boyd
Browse files

dt-bindings: clk: at91: add an I2S mux clock



The I2S mux clock can be used to select the I2S input clock. The
available parents are the peripheral and the generated clocks.
Signed-off-by: default avatarCodrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent ce397d21
......@@ -91,6 +91,9 @@ Required properties:
at91 audio pll output on AUDIOPLLCLK that feeds the PMC
and can be used by peripheral clock or generic clock
"atmel,sama5d2-clk-i2s-mux" (under pmc node):
at91 I2S clock source selection
Required properties for SCKC node:
- reg : defines the IO memory reserved for the SCKC.
- #size-cells : shall be 0 (reg is used to encode clk id).
......@@ -507,3 +510,35 @@ For example:
atmel,clk-output-range = <0 83000000>;
};
};
Required properties for I2S mux clocks:
- #size-cells : shall be 0 (reg is used to encode I2S bus id).
- #address-cells : shall be 1 (reg is used to encode I2S bus id).
- name: device tree node describing a specific mux clock.
* #clock-cells : from common clock binding; shall be set to 0.
* clocks : shall be the mux clock parent phandles; shall be 2 phandles:
peripheral and generated clock; the first phandle shall belong to the
peripheral clock and the second one shall belong to the generated
clock; "clock-indices" property can be user to specify
the correct order.
* reg: I2S bus id of the corresponding mux clock.
e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
For example:
i2s_clkmux {
compatible = "atmel,sama5d2-clk-i2s-mux";
#address-cells = <1>;
#size-cells = <0>;
i2s0muxck: i2s0_muxclk {
clocks = <&i2s0_clk>, <&i2s0_gclk>;
#clock-cells = <0>;
reg = <0>;
};
i2s1muxck: i2s1_muxclk {
clocks = <&i2s1_clk>, <&i2s1_gclk>;
#clock-cells = <0>;
reg = <1>;
};
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment