Commit d16adaf0 authored by Stephen Boyd's avatar Stephen Boyd

Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu',...

Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', 'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next

* clk-mvebu-spdx:
  clk: mvebu: armada-37xx-periph: switch to SPDX license identifier

* clk-meson:
  clk: meson: add gen_clk
  clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition
  clk: meson-axg: add clocks required by pcie driver
  clk: meson: remove unused clk-audio-divider driver
  clk: meson: stop rate propagation for audio clocks
  clk: meson: axg: add the audio clock controller driver
  clk: meson: add axg audio sclk divider driver
  clk: meson: add triple phase clock driver
  clk: meson: add clk-phase clock driver
  clk: meson: clean-up meson clock configuration
  clk: meson: remove obsolete register access
  clk: meson: expose GEN_CLK clkid
  clk: meson-axg: add pcie and mipi clock bindings
  dt-bindings: clock: add meson axg audio clock controller bindings
  clk: meson: audio-divider is one based
  clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL

* clk-imx7d-mu:
  :  - i.MX7D mailbox clk support
  clk: imx7d: add IMX7D_MU_ROOT_CLK

* clk-imx-init-array-cleanup:
  :  - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
  clk: imx6sx: remove clks_init_on array
  clk: imx6sl: remove clks_init_on array
  clk: imx6q: remove clks_init_on array

* clk-rockchip:
  clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
  clk: rockchip: fix clk_i2sout parent selection bits on rk3399
  clk: rockchip: add clock controller for px30
  clk: rockchip: add support for half divider
  dt-bindings: add bindings for px30 clock controller
  clk: rockchip: add dt-binding header for px30
* Amlogic AXG Audio Clock Controllers
The Amlogic AXG audio clock controller generates and supplies clock to the
other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
devices.
Required Properties:
- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D
- reg : physical base address of the clock controller and length of
memory mapped region.
- clocks : a list of phandle + clock-specifier pairs for the clocks listed
in clock-names.
- clock-names : must contain the following:
* "pclk" - Main peripheral bus clock
may contain the following:
* "mst_in[0-7]" - 8 input plls to generate clock signals
* "slv_sclk[0-9]" - 10 slave bit clocks provided by external
components.
* "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
components.
- resets : phandle of the internal reset line
- #clock-cells : should be 1.
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
used in device tree sources.
Example:
clkc_audio: clock-controller@0 {
compatible = "amlogic,axg-audio-clkc";
reg = <0x0 0x0 0x0 0xb4>;
#clock-cells = <1>;
clocks = <&clkc CLKID_AUDIO>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL3>,
<&clkc CLKID_HIFI_PLL>,
<&clkc CLKID_FCLK_DIV3>,
<&clkc CLKID_FCLK_DIV4>,
<&clkc CLKID_GP0_PLL>;
clock-names = "pclk",
"mst_in0",
"mst_in1",
"mst_in2",
"mst_in3",
"mst_in4",
"mst_in5",
"mst_in6",
"mst_in7";
resets = <&reset RESET_AUDIO>;
};
* Rockchip PX30 Clock and Reset Unit
The PX30 clock controller generates and supplies clock to various
controllers within the SoC and also implements a reset controller for SoC
peripherals.
Required Properties:
- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
- compatible: CRU should be "rockchip,px30-cru"
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
- #reset-cells: should be 1.
Optional Properties:
- rockchip,grf: phandle to the syscon managing the "general register files"
If missing, pll rates are not changeable, due to the missing pll lock status.
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
used in device tree sources. Similar macros exist for the reset sources in
these files.
External clocks:
There are several clocks that are generated outside the SoC. It is expected
that they are defined using standard clock bindings with following
clock-output-names:
- "xin24m" - crystal input - required,
- "xin32k" - rtc clock - optional,
- "i2sx_clkin" - external I2S clock - optional,
- "gmac_clkin" - external GMAC clock - optional
Example: Clock controller node:
pmucru: clock-controller@ff2bc000 {
compatible = "rockchip,px30-pmucru";
reg = <0x0 0xff2bc000 0x0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
cru: clock-controller@ff2b0000 {
compatible = "rockchip,px30-cru";
reg = <0x0 0xff2b0000 0x0 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
};
Example: UART controller node that consumes the clock generated by the clock
controller:
uart0: serial@ff030000 {
compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
reg = <0x0 0xff030000 0x0 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
};
......@@ -96,12 +96,6 @@ static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
static struct clk *clk[IMX6QDL_CLK_END];
static struct clk_onecell_data clk_data;
static unsigned int const clks_init_on[] __initconst = {
IMX6QDL_CLK_MMDC_CH0_AXI,
IMX6QDL_CLK_ROM,
IMX6QDL_CLK_ARM,
};
static struct clk_div_table clk_enet_ref_table[] = {
{ .val = 0, .div = 20, },
{ .val = 1, .div = 10, },
......@@ -417,7 +411,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *anatop_base, *base;
int i;
int ret;
clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
......@@ -794,7 +787,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "mlb_podf", base + 0x74, 18);
else
clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2_flags("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20, CLK_IS_CRITICAL);
clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
clk[IMX6QDL_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
clk[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
......@@ -808,7 +801,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[IMX6QDL_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
clk[IMX6QDL_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
clk[IMX6QDL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
clk[IMX6QDL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clk[IMX6QDL_CLK_ROM] = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL);
clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ahb", base + 0x7c, 4);
clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
......@@ -878,9 +871,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
*/
clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]);
clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]);
......
......@@ -104,10 +104,6 @@ static struct clk_onecell_data clk_data;
static void __iomem *ccm_base;
static void __iomem *anatop_base;
static const u32 clks_init_on[] __initconst = {
IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
};
/*
* ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
* during WAIT mode entry process could cause cache memory
......@@ -195,7 +191,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
int i;
int ret;
clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
......@@ -426,13 +421,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
pr_warn("%s: failed to set AHB clock rate %d!\n",
__func__, ret);
/*
* Make sure those always on clocks are enabled to maintain the correct
* usecount and enabling/disabling of parent PLLs.
*/
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);
......
......@@ -92,14 +92,6 @@ static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
static struct clk *clks[IMX6SX_CLK_CLK_END];
static struct clk_onecell_data clk_data;
static int const clks_init_on[] __initconst = {
IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3,
IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3,
IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG,
IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM,
IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_TZASC1,
};
static const struct clk_div_table clk_enet_ref_table[] = {
{ .val = 0, .div = 20, },
{ .val = 1, .div = 10, },
......@@ -142,7 +134,6 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
int i;
clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
......@@ -332,7 +323,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3);
clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
clks[IMX6SX_CLK_PERCLK] = imx_clk_divider_flags("perclk", "perclk_sel", base + 0x1c, 0, 6, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2);
clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6);
clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
......@@ -380,8 +371,8 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
/* name parent_name reg shift */
/* CCGR0 */
clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2_flags("aips_tz1", "ahb", base + 0x68, 0, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2_flags("aips_tz2", "ahb", base + 0x68, 2, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
......@@ -394,7 +385,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20);
clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24);
clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26);
clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2_flags("aips_tz3", "ahb", base + 0x68, 30, CLK_IS_CRITICAL);
/* CCGR1 */
clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
......@@ -407,7 +398,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai);
clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18);
clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2_flags("wakeup", "ipg", base + 0x6c, 18, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20);
clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26);
......@@ -420,10 +411,10 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14);
clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16);
clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18);
clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20);
clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22);
clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2_flags("ipmux1", "ahb", base + 0x70, 16, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2_flags("ipmux2", "ahb", base + 0x70, 18, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2_flags("ipmux3", "ahb", base + 0x70, 20, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2_flags("tzasc1", "mmdc_podf", base + 0x70, 22, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28);
clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30);
......@@ -437,15 +428,15 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12);
clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18);
clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24);
clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2_flags("ocram", "ocram_podf", base + 0x74, 28, CLK_IS_CRITICAL);
/* CCGR4 */
clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0);
clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10);
clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14);
clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2_flags("per2_main", "ahb", base + 0x78, 14, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
......@@ -456,7 +447,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
/* CCGR5 */
clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clks[IMX6SX_CLK_ROM] = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL);
clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
......@@ -502,9 +493,6 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]);
clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]);
......
......@@ -797,6 +797,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
clks[IMX7D_DRAM_ALT_ROOT_CLK] = imx_clk_gate4("dram_alt_root_clk", "dram_alt_post_div", base + 0x4130, 0);
clks[IMX7D_OCOTP_CLK] = imx_clk_gate4("ocotp_clk", "ipg_root_clk", base + 0x4230, 0);
clks[IMX7D_SNVS_CLK] = imx_clk_gate4("snvs_clk", "ipg_root_clk", base + 0x4250, 0);
clks[IMX7D_MU_ROOT_CLK] = imx_clk_gate4("mu_root_clk", "ipg_root_clk", base + 0x4270, 0);
clks[IMX7D_CAAM_CLK] = imx_clk_gate4("caam_clk", "ipg_root_clk", base + 0x4240, 0);
clks[IMX7D_USB_HSIC_ROOT_CLK] = imx_clk_gate4("usb_hsic_root_clk", "usb_hsic_post_div", base + 0x4690, 0);
clks[IMX7D_SDMA_CORE_CLK] = imx_clk_gate4("sdma_root_clk", "ahb_root_clk", base + 0x4480, 0);
......
config COMMON_CLK_AMLOGIC
bool
depends on OF
depends on ARCH_MESON || COMPILE_TEST
select COMMON_CLK_REGMAP_MESON
config COMMON_CLK_AMLOGIC_AUDIO
bool
depends on ARCH_MESON || COMPILE_TEST
select COMMON_CLK_AMLOGIC
config COMMON_CLK_MESON_AO
bool
depends on OF
depends on ARCH_MESON || COMPILE_TEST
select COMMON_CLK_REGMAP_MESON
select RESET_CONTROLLER
config COMMON_CLK_REGMAP_MESON
bool
......@@ -15,9 +21,8 @@ config COMMON_CLK_REGMAP_MESON
config COMMON_CLK_MESON8B
bool
depends on COMMON_CLK_AMLOGIC
select COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
select COMMON_CLK_REGMAP_MESON
help
Support for the clock controller on AmLogic S802 (Meson8),
S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you
......@@ -25,10 +30,8 @@ config COMMON_CLK_MESON8B
config COMMON_CLK_GXBB
bool
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
select COMMON_CLK_AMLOGIC
select COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select MFD_SYSCON
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
......@@ -36,11 +39,18 @@ config COMMON_CLK_GXBB
config COMMON_CLK_AXG
bool
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
select COMMON_CLK_AMLOGIC
select COMMON_CLK_MESON_AO
select COMMON_CLK_REGMAP_MESON
select MFD_SYSCON
help
Support for the clock controller on AmLogic A113D devices, aka axg.
Say Y if you want peripherals and CPU frequency scaling to work.
config COMMON_CLK_AXG_AUDIO
tristate "Meson AXG Audio Clock Controller Driver"
depends on COMMON_CLK_AXG
select COMMON_CLK_AMLOGIC_AUDIO
select MFD_SYSCON
help
Support for the audio clock controller on AmLogic A113D devices,
aka axg, Say Y if you want audio subsystem to work.
......@@ -2,9 +2,11 @@
# Makefile for Meson specific clk
#
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o
obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o sclk-div.o
obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
obj-$(CONFIG_COMMON_CLK_REGMAP_MESON) += clk-regmap.o
This diff is collapsed.
/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
/*
* Copyright (c) 2018 BayLibre, SAS.
* Author: Jerome Brunet <jbrunet@baylibre.com>
*/
#ifndef __AXG_AUDIO_CLKC_H
#define __AXG_AUDIO_CLKC_H
/*
* Audio Clock register offsets
*
* Register offsets from the datasheet must be multiplied by 4 before
* to get the right offset
*/
#define AUDIO_CLK_GATE_EN 0x000
#define AUDIO_MCLK_A_CTRL 0x004
#define AUDIO_MCLK_B_CTRL 0x008
#define AUDIO_MCLK_C_CTRL 0x00C
#define AUDIO_MCLK_D_CTRL 0x010
#define AUDIO_MCLK_E_CTRL 0x014
#define AUDIO_MCLK_F_CTRL 0x018
#define AUDIO_MST_A_SCLK_CTRL0 0x040
#define AUDIO_MST_A_SCLK_CTRL1 0x044
#define AUDIO_MST_B_SCLK_CTRL0 0x048
#define AUDIO_MST_B_SCLK_CTRL1 0x04C
#define AUDIO_MST_C_SCLK_CTRL0 0x050
#define AUDIO_MST_C_SCLK_CTRL1 0x054
#define AUDIO_MST_D_SCLK_CTRL0 0x058
#define AUDIO_MST_D_SCLK_CTRL1 0x05C
#define AUDIO_MST_E_SCLK_CTRL0 0x060
#define AUDIO_MST_E_SCLK_CTRL1 0x064
#define AUDIO_MST_F_SCLK_CTRL0 0x068
#define AUDIO_MST_F_SCLK_CTRL1 0x06C
#define AUDIO_CLK_TDMIN_A_CTRL 0x080
#define AUDIO_CLK_TDMIN_B_CTRL 0x084
#define AUDIO_CLK_TDMIN_C_CTRL 0x088
#define AUDIO_CLK_TDMIN_LB_CTRL 0x08C
#define AUDIO_CLK_TDMOUT_A_CTRL 0x090
#define AUDIO_CLK_TDMOUT_B_CTRL 0x094
#define AUDIO_CLK_TDMOUT_C_CTRL 0x098
#define AUDIO_CLK_SPDIFIN_CTRL 0x09C
#define AUDIO_CLK_SPDIFOUT_CTRL 0x0A0
#define AUDIO_CLK_RESAMPLE_CTRL 0x0A4
#define AUDIO_CLK_LOCKER_CTRL 0x0A8
#define AUDIO_CLK_PDMIN_CTRL0 0x0AC
#define AUDIO_CLK_PDMIN_CTRL1 0x0B0
/*
* CLKID index values
* These indices are entirely contrived and do not map onto the hardware.
*/
#define AUD_CLKID_PCLK 0
#define AUD_CLKID_MST0 1
#define AUD_CLKID_MST1 2
#define AUD_CLKID_MST2 3
#define AUD_CLKID_MST3 4
#define AUD_CLKID_MST4 5
#define AUD_CLKID_MST5 6
#define AUD_CLKID_MST6 7
#define AUD_CLKID_MST7 8
#define AUD_CLKID_MST_A_MCLK_SEL 59
#define AUD_CLKID_MST_B_MCLK_SEL 60
#define AUD_CLKID_MST_C_MCLK_SEL 61
#define AUD_CLKID_MST_D_MCLK_SEL 62
#define AUD_CLKID_MST_E_MCLK_SEL 63
#define AUD_CLKID_MST_F_MCLK_SEL 64
#define AUD_CLKID_MST_A_MCLK_DIV 65
#define AUD_CLKID_MST_B_MCLK_DIV 66
#define AUD_CLKID_MST_C_MCLK_DIV 67
#define AUD_CLKID_MST_D_MCLK_DIV 68
#define AUD_CLKID_MST_E_MCLK_DIV 69
#define AUD_CLKID_MST_F_MCLK_DIV 70
#define AUD_CLKID_SPDIFOUT_CLK_SEL 71
#define AUD_CLKID_SPDIFOUT_CLK_DIV 72
#define AUD_CLKID_SPDIFIN_CLK_SEL 73
#define AUD_CLKID_SPDIFIN_CLK_DIV 74
#define AUD_CLKID_PDM_DCLK_SEL 75
#define AUD_CLKID_PDM_DCLK_DIV 76
#define AUD_CLKID_PDM_SYSCLK_SEL 77
#define AUD_CLKID_PDM_SYSCLK_DIV 78
#define AUD_CLKID_MST_A_SCLK_PRE_EN 92
#define AUD_CLKID_MST_B_SCLK_PRE_EN 93
#define AUD_CLKID_MST_C_SCLK_PRE_EN 94
#define AUD_CLKID_MST_D_SCLK_PRE_EN 95
#define AUD_CLKID_MST_E_SCLK_PRE_EN 96
#define AUD_CLKID_MST_F_SCLK_PRE_EN 97
#define AUD_CLKID_MST_A_SCLK_DIV 98
#define AUD_CLKID_MST_B_SCLK_DIV 99
#define AUD_CLKID_MST_C_SCLK_DIV 100
#define AUD_CLKID_MST_D_SCLK_DIV 101
#define AUD_CLKID_MST_E_SCLK_DIV 102
#define AUD_CLKID_MST_F_SCLK_DIV 103
#define AUD_CLKID_MST_A_SCLK_POST_EN 104
#define AUD_CLKID_MST_B_SCLK_POST_EN 105
#define AUD_CLKID_MST_C_SCLK_POST_EN 106
#define AUD_CLKID_MST_D_SCLK_POST_EN 107
#define AUD_CLKID_MST_E_SCLK_POST_EN 108
#define AUD_CLKID_MST_F_SCLK_POST_EN 109
#define AUD_CLKID_MST_A_LRCLK_DIV 110
#define AUD_CLKID_MST_B_LRCLK_DIV 111
#define AUD_CLKID_MST_C_LRCLK_DIV 112
#define AUD_CLKID_MST_D_LRCLK_DIV 113
#define AUD_CLKID_MST_E_LRCLK_DIV 114
#define AUD_CLKID_MST_F_LRCLK_DIV 115
#define AUD_CLKID_TDMIN_A_SCLK_PRE_EN 137
#define AUD_CLKID_TDMIN_B_SCLK_PRE_EN 138
#define AUD_CLKID_TDMIN_C_SCLK_PRE_EN 139
#define AUD_CLKID_TDMIN_LB_SCLK_PRE_EN 140
#define AUD_CLKID_TDMOUT_A_SCLK_PRE_EN 141
#define AUD_CLKID_TDMOUT_B_SCLK_PRE_EN 142
#define AUD_CLKID_TDMOUT_C_SCLK_PRE_EN 143
#define AUD_CLKID_TDMIN_A_SCLK_POST_EN 144
#define AUD_CLKID_TDMIN_B_SCLK_POST_EN 145
#define AUD_CLKID_TDMIN_C_SCLK_POST_EN 146
#define AUD_CLKID_TDMIN_LB_SCLK_POST_EN 147
#define AUD_CLKID_TDMOUT_A_SCLK_POST_EN 148
#define AUD_CLKID_TDMOUT_B_SCLK_POST_EN 149
#define AUD_CLKID_TDMOUT_C_SCLK_POST_EN 150
/* include the CLKIDs which are part of the DT bindings */
#include <dt-bindings/clock/axg-audio-clkc.h>
#define NR_CLKS 151
#endif /*__AXG_AUDIO_CLKC_H */
......@@ -12,7 +12,6 @@
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
......@@ -626,6 +625,137 @@ static struct clk_regmap axg_mpll3 = {
},
};
static const struct pll_rate_table axg_pcie_pll_rate_table[] = {
{
.rate = 100000000,
.m = 200,
.n = 3,
.od = 1,
.od2 = 3,
},
{ /* sentinel */ },
};
static const struct reg_sequence axg_pcie_init_regs[] = {
{ .reg = HHI_PCIE_PLL_CNTL, .def = 0x400106c8 },
{ .reg = HHI_PCIE_PLL_CNTL1, .def = 0x0084a2aa },
{ .reg = HHI_PCIE_PLL_CNTL2, .def = 0xb75020be },
{ .reg = HHI_PCIE_PLL_CNTL3, .def = 0x0a47488e },
{ .reg = HHI_PCIE_PLL_CNTL4, .def = 0xc000004d },
{ .reg = HHI_PCIE_PLL_CNTL5, .def = 0x00078000 },
{ .reg = HHI_PCIE_PLL_CNTL6, .def = 0x002323c6 },
};
static struct clk_regmap axg_pcie_pll = {
.data = &(struct meson_clk_pll_data){
.m = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 9,
.width = 5,
},
.od = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 16,
.width = 2,
},
.od2 = {
.reg_off = HHI_PCIE_PLL_CNTL6,
.shift = 6,
.width = 2,
},
.frac = {
.reg_off = HHI_PCIE_PLL_CNTL1,
.shift = 0,
.width = 12,
},
.l = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 29,
.width = 1,
},
.table = axg_pcie_pll_rate_table,
.init_regs = axg_pcie_init_regs,
.init_count = ARRAY_SIZE(axg_pcie_init_regs),
},
.hw.init = &(struct clk_init_data){
.name = "pcie_pll",
.ops = &meson_clk_pll_ops,
.parent_names = (const char *[]){ "xtal" },
.num_parents = 1,
},
};
static struct clk_regmap axg_pcie_mux = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_PCIE_PLL_CNTL6,
.mask = 0x1,
.shift = 2,
},
.hw.init = &(struct clk_init_data){
.name = "pcie_mux",
.ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "mpll3", "pcie_pll" },
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_pcie_ref = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_PCIE_PLL_CNTL6,
.mask = 0x1,
.shift = 1,
/* skip the parent 0, reserved for debug */
.table = (u32[]){ 1 },
},
.hw.init = &(struct clk_init_data){
.name = "pcie_ref",
.ops = &clk_regmap_mux_ops,
.parent_names = (const char *[]){ "pcie_mux" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_pcie_cml_en0 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_PCIE_PLL_CNTL6,
.bit_idx = 4,
},
.hw.init = &(struct clk_init_data) {
.name = "pcie_cml_en0",
.ops = &clk_regmap_gate_ops,
.parent_names = (const char *[]){ "pcie_ref" },
.num_parents = 1,