Commit d5d359b0 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - add sanity checks to USB endpoints in various dirvers

 - max77650-onkey was missing an OF table which was preventing module
   autoloading

 - a revert and a different fix for F54 handling in Synaptics dirver

 - a fixup for handling register in pm8xxx vibrator driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: pm8xxx-vib - fix handling of separate enable register
  Input: keyspan-remote - fix control-message timeouts
  Input: max77650-onkey - add of_match table
  Input: rmi_f54 - read from FIFO in 32 byte blocks
  Revert "Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers"
  Input: sur40 - fix interface sanity checks
  Input: gtco - drop redundant variable reinit
  Input: gtco - fix extra-descriptor debug message
  Input: gtco - fix endpoint sanity check
  Input: aiptek - use descriptors of current altsetting
  Input: aiptek - fix endpoint sanity check
  Input: pegasus_notetaker - fix endpoint sanity check
  Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register
  Input: evdev - convert kzalloc()/vzalloc() to kvzalloc()
parents 6381b442 996d5d5f
......@@ -484,10 +484,7 @@ static int evdev_open(struct inode *inode, struct file *file)
struct evdev_client *client;
int error;
client = kzalloc(struct_size(client, buffer, bufsize),
GFP_KERNEL | __GFP_NOWARN);
if (!client)
client = vzalloc(struct_size(client, buffer, bufsize));
client = kvzalloc(struct_size(client, buffer, bufsize), GFP_KERNEL);
if (!client)
return -ENOMEM;
......
......@@ -336,7 +336,8 @@ static int keyspan_setup(struct usb_device* dev)
int retval = 0;
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
0x11, 0x40, 0x5601, 0x0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
__func__, retval);
......@@ -344,7 +345,8 @@ static int keyspan_setup(struct usb_device* dev)
}
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
0x44, 0x40, 0x0, 0x0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
__func__, retval);
......@@ -352,7 +354,8 @@ static int keyspan_setup(struct usb_device* dev)
}
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
0x22, 0x40, 0x0, 0x0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (retval) {
dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
__func__, retval);
......
......@@ -108,9 +108,16 @@ static int max77650_onkey_probe(struct platform_device *pdev)
return input_register_device(onkey->input);
}
static const struct of_device_id max77650_onkey_of_match[] = {
{ .compatible = "maxim,max77650-onkey" },
{ }
};
MODULE_DEVICE_TABLE(of, max77650_onkey_of_match);
static struct platform_driver max77650_onkey_driver = {
.driver = {
.name = "max77650-onkey",
.of_match_table = max77650_onkey_of_match,
},
.probe = max77650_onkey_probe,
};
......
......@@ -90,7 +90,7 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
if (regs->enable_mask)
rc = regmap_update_bits(vib->regmap, regs->enable_addr,
on ? regs->enable_mask : 0, val);
regs->enable_mask, on ? ~0 : 0);
return rc;
}
......
......@@ -24,6 +24,12 @@
#define F54_NUM_TX_OFFSET 1
#define F54_NUM_RX_OFFSET 0
/*
* The smbus protocol can read only 32 bytes max at a time.
* But this should be fine for i2c/spi as well.
*/
#define F54_REPORT_DATA_SIZE 32
/* F54 commands */
#define F54_GET_REPORT 1
#define F54_FORCE_CAL 2
......@@ -526,6 +532,7 @@ static void rmi_f54_work(struct work_struct *work)
int report_size;
u8 command;
int error;
int i;
report_size = rmi_f54_get_report_size(f54);
if (report_size == 0) {
......@@ -558,23 +565,27 @@ static void rmi_f54_work(struct work_struct *work)
rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Get report command completed, reading data\n");
fifo[0] = 0;
fifo[1] = 0;
error = rmi_write_block(fn->rmi_dev,
fn->fd.data_base_addr + F54_FIFO_OFFSET,
fifo, sizeof(fifo));
if (error) {
dev_err(&fn->dev, "Failed to set fifo start offset\n");
goto abort;
}
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
fifo[0] = i & 0xff;
fifo[1] = i >> 8;
error = rmi_write_block(fn->rmi_dev,
fn->fd.data_base_addr + F54_FIFO_OFFSET,
fifo, sizeof(fifo));
if (error) {
dev_err(&fn->dev, "Failed to set fifo start offset\n");
goto abort;
}
error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr +
F54_REPORT_DATA_OFFSET, f54->report_data,
report_size);
if (error) {
dev_err(&fn->dev, "%s: read [%d bytes] returned %d\n",
__func__, report_size, error);
goto abort;
error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr +
F54_REPORT_DATA_OFFSET,
f54->report_data + i, size);
if (error) {
dev_err(&fn->dev, "%s: read [%d bytes] returned %d\n",
__func__, size, error);
goto abort;
}
}
abort:
......
......@@ -163,6 +163,7 @@ static int rmi_smb_write_block(struct rmi_transport_dev *xport, u16 rmiaddr,
/* prepare to write next block of bytes */
cur_len -= SMB_MAX_COUNT;
databuff += SMB_MAX_COUNT;
rmiaddr += SMB_MAX_COUNT;
}
exit:
mutex_unlock(&rmi_smb->page_mutex);
......@@ -214,6 +215,7 @@ static int rmi_smb_read_block(struct rmi_transport_dev *xport, u16 rmiaddr,
/* prepare to read next block of bytes */
cur_len -= SMB_MAX_COUNT;
databuff += SMB_MAX_COUNT;
rmiaddr += SMB_MAX_COUNT;
}
retval = 0;
......
......@@ -1713,7 +1713,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
aiptek->inputdev = inputdev;
aiptek->intf = intf;
aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
aiptek->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
aiptek->inDelay = 0;
aiptek->endDelay = 0;
aiptek->previousJitterable = 0;
......@@ -1802,14 +1802,14 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
/* Verify that a device really has an endpoint */
if (intf->altsetting[0].desc.bNumEndpoints < 1) {
if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
dev_err(&intf->dev,
"interface has %d endpoints, but must have minimum 1\n",
intf->altsetting[0].desc.bNumEndpoints);
intf->cur_altsetting->desc.bNumEndpoints);
err = -EINVAL;
goto fail3;
}
endpoint = &intf->altsetting[0].endpoint[0].desc;
endpoint = &intf->cur_altsetting->endpoint[0].desc;
/* Go set up our URB, which is called when the tablet receives
* input.
......
......@@ -875,18 +875,14 @@ static int gtco_probe(struct usb_interface *usbinterface,
}
/* Sanity check that a device has an endpoint */
if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) {
if (usbinterface->cur_altsetting->desc.bNumEndpoints < 1) {
dev_err(&usbinterface->dev,
"Invalid number of endpoints\n");
error = -EINVAL;
goto err_free_urb;
}
/*
* The endpoint is always altsetting 0, we know this since we know
* this device only has one interrupt endpoint
*/
endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
endpoint = &usbinterface->cur_altsetting->endpoint[0].desc;
/* Some debug */
dev_dbg(&usbinterface->dev, "gtco # interfaces: %d\n", usbinterface->num_altsetting);
......@@ -896,7 +892,8 @@ static int gtco_probe(struct usb_interface *usbinterface,
if (usb_endpoint_xfer_int(endpoint))
dev_dbg(&usbinterface->dev, "endpoint: we have interrupt endpoint\n");
dev_dbg(&usbinterface->dev, "endpoint extra len:%d\n", usbinterface->altsetting[0].extralen);
dev_dbg(&usbinterface->dev, "interface extra len:%d\n",
usbinterface->cur_altsetting->extralen);
/*
* Find the HID descriptor so we can find out the size of the
......@@ -973,8 +970,6 @@ static int gtco_probe(struct usb_interface *usbinterface,
input_dev->dev.parent = &usbinterface->dev;
/* Setup the URB, it will be posted later on open of input device */
endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
usb_fill_int_urb(gtco->urbinfo,
udev,
usb_rcvintpipe(udev,
......
......@@ -275,7 +275,7 @@ static int pegasus_probe(struct usb_interface *intf,
return -ENODEV;
/* Sanity check that the device has an endpoint */
if (intf->altsetting[0].desc.bNumEndpoints < 1) {
if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
dev_err(&intf->dev, "Invalid number of endpoints\n");
return -EINVAL;
}
......
......@@ -237,6 +237,7 @@ static int sun4i_ts_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device *hwmon;
struct thermal_zone_device *thermal;
int error;
u32 reg;
bool ts_attached;
......@@ -355,7 +356,10 @@ static int sun4i_ts_probe(struct platform_device *pdev)
if (IS_ERR(hwmon))
return PTR_ERR(hwmon);
devm_thermal_zone_of_sensor_register(ts->dev, 0, ts, &sun4i_ts_tz_ops);
thermal = devm_thermal_zone_of_sensor_register(ts->dev, 0, ts,
&sun4i_ts_tz_ops);
if (IS_ERR(thermal))
return PTR_ERR(thermal);
writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
......
......@@ -661,7 +661,7 @@ static int sur40_probe(struct usb_interface *interface,
int error;
/* Check if we really have the right interface. */
iface_desc = &interface->altsetting[0];
iface_desc = interface->cur_altsetting;
if (iface_desc->desc.bInterfaceClass != 0xFF)
return -ENODEV;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment