Commit debef195 authored by Anson Huang's avatar Anson Huang Committed by Stephen Boyd
Browse files

clk: imx6ul: add GPIO clock gates



i.MX6UL has GPIO clock gates in CCM CCGR,
add them into clock tree for clock management.
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent 55c5e0c6
......@@ -360,6 +360,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28);
if (clk_on_imx6ull())
clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18);
clks[IMX6UL_CLK_GPIO2] = imx_clk_gate2("gpio2", "ipg", base + 0x68, 30);
/* CCGR1 */
clks[IMX6UL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
......@@ -376,6 +377,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_GPT1_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22);
clks[IMX6UL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24);
clks[IMX6UL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serial", "uart_podf", base + 0x6c, 24);
clks[IMX6UL_CLK_GPIO1] = imx_clk_gate2("gpio1", "ipg", base + 0x6c, 26);
clks[IMX6UL_CLK_GPIO5] = imx_clk_gate2("gpio5", "ipg", base + 0x6c, 30);
/* CCGR2 */
if (clk_on_imx6ull()) {
......@@ -389,6 +392,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
clks[IMX6UL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
clks[IMX6UL_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif_podf", base + 0x70, 14);
clks[IMX6UL_CLK_GPIO3] = imx_clk_gate2("gpio3", "ipg", base + 0x70, 26);
clks[IMX6UL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28);
clks[IMX6UL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30);
......@@ -405,6 +409,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_UART6_IPG] = imx_clk_gate2("uart6_ipg", "ipg", base + 0x74, 6);
clks[IMX6UL_CLK_UART6_SERIAL] = imx_clk_gate2("uart6_serial", "uart_podf", base + 0x74, 6);
clks[IMX6UL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10);
clks[IMX6UL_CLK_GPIO4] = imx_clk_gate2("gpio4", "ipg", base + 0x74, 12);
clks[IMX6UL_CLK_QSPI] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
clks[IMX6UL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16);
clks[IMX6UL_CLK_MMDC_P0_FAST] = imx_clk_gate("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
......
......@@ -254,6 +254,12 @@
#define IMX6UL_CLK_CKO2_PODF 241
#define IMX6UL_CLK_CKO2 242
#define IMX6UL_CLK_CKO 243
#define IMX6UL_CLK_END 244
#define IMX6UL_CLK_GPIO1 244
#define IMX6UL_CLK_GPIO2 245
#define IMX6UL_CLK_GPIO3 246
#define IMX6UL_CLK_GPIO4 247
#define IMX6UL_CLK_GPIO5 248
#define IMX6UL_CLK_END 249
#endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment