1. 15 Jun, 2018 1 commit
  2. 27 Jan, 2015 1 commit
    • Ondrej Zary's avatar
      [media] bttv: Convert to generic TEA575x interface · 1b500373
      Ondrej Zary authored
      Remove tea575x-specific code from bttv and use the common driver instead.
      Only set_frequency is implemented (signal/stereo detection or seek would
      require more changes to bttv).
      It works fine on Video Highway Xtreme (it actually makes the radio usable as
      it currently cannot be tuned properly).
      Miro/Pinnacle is untested but seems to be simple and should work.
      However, I don't understand the Terratec Active Radio Upgrade code. The HW
      seems to need IOR, IOW and CSEL signals that were taken from ISA bus on
      older cards (IOR and IOW directly and CSEL from some address decoder) and
      are emulated here using GPIOs. But the code manipulating these signals in
      bttv seems to be broken - it never asserts the IOR signal. If anyone has
      this HW, please test if I got that right.
      Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
      Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
  3. 23 Dec, 2014 1 commit
  4. 21 Aug, 2012 1 commit
    • Mauro Carvalho Chehab's avatar
      [media] Kconfig: merge all customise options into just one · fccea74f
      Mauro Carvalho Chehab authored
      Instead of having 3 options to allow customizing the media
      sub-drivers (tuners, I2C drivers, frontends), merge all of
      them into just one.
      That simplifies the life for users, as they can just keep
      this untouched.
      Life for developers is also simpler, as there's now just
      one Kconfig item to remember, for the ancillary sub-drivers
      providing supports for chips that could change from one
      board design to another.
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
  5. 15 Aug, 2012 1 commit
  6. 14 Aug, 2012 1 commit
  7. 30 Mar, 2009 1 commit
  8. 16 Dec, 2008 1 commit
    • Mauro Carvalho Chehab's avatar
      V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204 · 8b21c1e9
      Mauro Carvalho Chehab authored
      When the tuner modules were moved to common/tuners, a separate customize
      option were added for tuners. However, the automatic selection of the
      tuners were still using the older option.
      This causes that the automatic selection to fail, if DVB_FE_CUSTOMISE is
      selected. Also, since those tuners are now under MEDIA_TUNER_CUSTOMIZE
      menu, if you unset MEDIA_TUNER_CUSTOMIZE, you can't manually select the
      This patch fixes this error by replacing DVB_FE_CUSTOMISE by
      MEDIA_TUNER_CUSTOMIZE on all places were a tuner is selected.
      The patch were generated by this small script:
      for i in `find drivers/media -name Kconfig`; do
        cat $i|perl -ne 's/(MEDIA_TUNER.*)DVB_FE_CUSTOMISE/\1MEDIA_TUNER_CUSTOMIZE/; print $_' >a
        mv a $i
      Also, manually reordered the tuner entries.
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
  9. 27 Jul, 2008 1 commit
  10. 14 May, 2008 1 commit
    • Mauro Carvalho Chehab's avatar
      V4L/DVB (7851): Fix FW_LOADER depencency at v4l/dvb · 755a18ba
      Mauro Carvalho Chehab authored
      1) FW_LOADER is defined as:
      config FW_LOADER
              tristate "Userspace firmware loading support"
              depends on HOTPLUG
      2) several V4L/DVB driver just selects it;
      3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER.
      So, All drivers that select FW_LOADER should also depend on HOTPLUG.
      An easier solution (for the end-user perspective) would be to "select HOTPLUG".
      However, live is not simple. This would cause recursive dependency issues like
      this one:
      drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
  11. 29 Apr, 2008 1 commit
  12. 24 Apr, 2008 1 commit
  13. 18 Jul, 2007 1 commit
  14. 27 Apr, 2007 1 commit
    • Trent Piepho's avatar
      V4L/DVB (5363): Dvb: Remove lgh06xf driver · 6bdcc6e6
      Trent Piepho authored
      The code of the dvb-pll driver and the lgh06xf driver is nearly
      identical.  The main difference is that the lgh06xf driver would set the
      AGC TOP value on every tune call.  The dvb-pll driver now has the ability
      to set the AGC TOP when the front-end device is opened, which is a better
      way to go about it.  By using this ability of dvb-pll, the lgh06xf driver
      is made unnecessary.
      There is one other difference.  dvb-pll will probe for the presence of an
      I2C pll chip by doing a one byte read, the lgh06xf driver did not do
      this.  In some devices the PLL is not reachable over I2C at the timer the
      tuner is attached.  Some more initialization, such as firmware loading,
      must take place first.  None of the devices using a LG-H06xF should have
      this problem.
      Signed-off-by: default avatarTrent Piepho <xyzzy@speakeasy.org>
      Acked-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
  15. 10 Dec, 2006 1 commit
  16. 26 Sep, 2006 1 commit
  17. 10 Sep, 2006 1 commit
  18. 23 May, 2006 1 commit
  19. 12 May, 2006 1 commit
  20. 02 Apr, 2006 1 commit
  21. 09 Nov, 2005 1 commit
  22. 07 Sep, 2005 1 commit
  23. 17 May, 2005 1 commit
  24. 16 Apr, 2005 1 commit
    • Linus Torvalds's avatar
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds authored
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      Let it rip!