Commit 3b6c2179 authored by Catherine Sullivan's avatar Catherine Sullivan Committed by Jeff Kirsher
Browse files

i40e: Remove 100M SGMII unless hw is X722



Only the X722 device now supports 100M SGMII, and nothing supports
100M on 1000Base_T.

Change-ID: I6f44dcd818944edd40041410e6de380f4a359a0c
Signed-off-by: default avatarCatherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: default avatarShannon Nelson <shannon.nelson@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 8279e495
......@@ -255,7 +255,8 @@ static void i40e_partition_setting_complaint(struct i40e_pf *pf)
**/
static void i40e_get_settings_link_up(struct i40e_hw *hw,
struct ethtool_cmd *ecmd,
struct net_device *netdev)
struct net_device *netdev,
struct i40e_pf *pf)
{
struct i40e_link_status *hw_link_info = &hw->phy.link_info;
u32 link_speed = hw_link_info->link_speed;
......@@ -299,16 +300,18 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
break;
case I40E_PHY_TYPE_10GBASE_T:
case I40E_PHY_TYPE_1000BASE_T:
case I40E_PHY_TYPE_100BASE_TX:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full;
SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_Autoneg;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_10GB)
ecmd->advertising |= ADVERTISED_10000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
ecmd->advertising |= ADVERTISED_1000baseT_Full;
break;
case I40E_PHY_TYPE_100BASE_TX:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_100baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
ecmd->advertising |= ADVERTISED_100baseT_Full;
break;
......@@ -328,12 +331,15 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
break;
case I40E_PHY_TYPE_SGMII:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full;
SUPPORTED_1000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
ecmd->advertising |= ADVERTISED_1000baseT_Full;
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_100MB)
ecmd->advertising |= ADVERTISED_100baseT_Full;
if (pf->hw.mac.type == I40E_MAC_X722) {
ecmd->supported |= SUPPORTED_100baseT_Full;
if (hw_link_info->requested_speeds &
I40E_LINK_SPEED_100MB)
ecmd->advertising |= ADVERTISED_100baseT_Full;
}
break;
/* Backplane is set based on supported phy types in get_settings
* so don't set anything here but don't warn either
......@@ -381,7 +387,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
* Reports link settings that can be determined when link is down
**/
static void i40e_get_settings_link_down(struct i40e_hw *hw,
struct ethtool_cmd *ecmd)
struct ethtool_cmd *ecmd,
struct i40e_pf *pf)
{
enum i40e_aq_capabilities_phy_type phy_types = hw->phy.phy_types;
......@@ -392,11 +399,13 @@ static void i40e_get_settings_link_down(struct i40e_hw *hw,
ecmd->advertising = 0x0;
if (phy_types & I40E_CAP_PHY_TYPE_SGMII) {
ecmd->supported |= SUPPORTED_Autoneg |
SUPPORTED_1000baseT_Full |
SUPPORTED_100baseT_Full;
SUPPORTED_1000baseT_Full;
ecmd->advertising |= ADVERTISED_Autoneg |
ADVERTISED_1000baseT_Full |
ADVERTISED_100baseT_Full;
ADVERTISED_1000baseT_Full;
if (pf->hw.mac.type == I40E_MAC_X722) {
ecmd->supported |= SUPPORTED_100baseT_Full;
ecmd->advertising |= ADVERTISED_100baseT_Full;
}
}
if (phy_types & I40E_CAP_PHY_TYPE_XAUI ||
phy_types & I40E_CAP_PHY_TYPE_XFI ||
......@@ -425,7 +434,8 @@ static void i40e_get_settings_link_down(struct i40e_hw *hw,
ecmd->advertising |= ADVERTISED_Autoneg |
ADVERTISED_40000baseCR4_Full;
}
if (phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) {
if ((phy_types & I40E_CAP_PHY_TYPE_100BASE_TX) &&
!(phy_types & I40E_CAP_PHY_TYPE_1000BASE_T)) {
ecmd->supported |= SUPPORTED_Autoneg |
SUPPORTED_100baseT_Full;
ecmd->advertising |= ADVERTISED_Autoneg |
......@@ -467,9 +477,9 @@ static int i40e_get_settings(struct net_device *netdev,
bool link_up = hw_link_info->link_info & I40E_AQ_LINK_UP;
if (link_up)
i40e_get_settings_link_up(hw, ecmd, netdev);
i40e_get_settings_link_up(hw, ecmd, netdev, pf);
else
i40e_get_settings_link_down(hw, ecmd);
i40e_get_settings_link_down(hw, ecmd, pf);
/* Now set the settings that don't rely on link being up/down */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment