Commit 9adbac59 authored by Jacob Keller's avatar Jacob Keller Committed by Jeff Kirsher
Browse files

fm10k: fix iov_msg_mac_vlan_pf VID checks



The VF will send a message to request multicast addresses with the
default VID. In the current code, if the PF has statically assigned a
VLAN to a VF, then the VF will not get the multicast addresses. Fix up
all of the various VLAN messages to use identical checks (since each
check was different). Also use set as a variable, so that it simplifies
our check for whether VLAN matches the pf_vid.

The new logic will allow set of a VLAN if it is zero, automatically
converting to the default VID. Otherwise it will allow setting the PF
VID, or any VLAN if PF has not statically assigned a VLAN. This is
consistent behavior, and allows VF to request either 0 or the
default_vid without silently failing.

Note that we need the check for zero since VFs might not get the default
VID message in time to actually request non-zero VLANs.

Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent ac981003
......@@ -1154,6 +1154,24 @@ s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 **results,
return hw->iov.ops.assign_int_moderator(hw, vf_idx);
}
/**
* fm10k_iov_select_vid - Select correct default VID
* @hw: Pointer to hardware structure
* @vid: VID to correct
*
* Will report an error if VID is out of range. For VID = 0, it will return
* either the pf_vid or sw_vid depending on which one is set.
*/
static inline s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid)
{
if (!vid)
return vf_info->pf_vid ? vf_info->pf_vid : vf_info->sw_vid;
else if (vf_info->pf_vid && vid != vf_info->pf_vid)
return FM10K_ERR_PARAM;
else
return vid;
}
/**
* fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF
* @hw: Pointer to hardware structure
......@@ -1168,9 +1186,10 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
struct fm10k_mbx_info *mbx)
{
struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
int err = 0;
u8 mac[ETH_ALEN];
u32 *result;
int err = 0;
bool set;
u16 vlan;
u32 vid;
......@@ -1186,19 +1205,21 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
if (err)
return err;
/* if VLAN ID is 0, set the default VLAN ID instead of 0 */
if (!vid || (vid == FM10K_VLAN_CLEAR)) {
if (vf_info->pf_vid)
vid |= vf_info->pf_vid;
else
vid |= vf_info->sw_vid;
} else if (vid != vf_info->pf_vid) {
/* verify upper 16 bits are zero */
if (vid >> 16)
return FM10K_ERR_PARAM;
}
set = !(vid & FM10K_VLAN_CLEAR);
vid &= ~FM10K_VLAN_CLEAR;
err = fm10k_iov_select_vid(vf_info, vid);
if (err < 0)
return err;
else
vid = err;
/* update VSI info for VF in regards to VLAN table */
err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi,
!(vid & FM10K_VLAN_CLEAR));
err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);
}
if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) {
......@@ -1214,19 +1235,18 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
memcmp(mac, vf_info->mac, ETH_ALEN))
return FM10K_ERR_PARAM;
/* if VLAN ID is 0, set the default VLAN ID instead of 0 */
if (!vlan || (vlan == FM10K_VLAN_CLEAR)) {
if (vf_info->pf_vid)
vlan |= vf_info->pf_vid;
else
vlan |= vf_info->sw_vid;
} else if (vf_info->pf_vid) {
return FM10K_ERR_PARAM;
}
set = !(vlan & FM10K_VLAN_CLEAR);
vlan &= ~FM10K_VLAN_CLEAR;
err = fm10k_iov_select_vid(vf_info, vlan);
if (err < 0)
return err;
else
vlan = err;
/* notify switch of request for new unicast address */
err = hw->mac.ops.update_uc_addr(hw, vf_info->glort, mac, vlan,
!(vlan & FM10K_VLAN_CLEAR), 0);
err = hw->mac.ops.update_uc_addr(hw, vf_info->glort,
mac, vlan, set, 0);
}
if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) {
......@@ -1241,19 +1261,18 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED))
return FM10K_ERR_PARAM;
/* if VLAN ID is 0, set the default VLAN ID instead of 0 */
if (!vlan || (vlan == FM10K_VLAN_CLEAR)) {
if (vf_info->pf_vid)
vlan |= vf_info->pf_vid;
else
vlan |= vf_info->sw_vid;
} else if (vf_info->pf_vid) {
return FM10K_ERR_PARAM;
}
set = !(vlan & FM10K_VLAN_CLEAR);
vlan &= ~FM10K_VLAN_CLEAR;
err = fm10k_iov_select_vid(vf_info, vlan);
if (err < 0)
return err;
else
vlan = err;
/* notify switch of request for new multicast address */
err = hw->mac.ops.update_mc_addr(hw, vf_info->glort, mac, vlan,
!(vlan & FM10K_VLAN_CLEAR));
err = hw->mac.ops.update_mc_addr(hw, vf_info->glort,
mac, vlan, set);
}
return err;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment