Commit f1e911d5 authored by Heiner Kallweit's avatar Heiner Kallweit Committed by David S. Miller
Browse files

r8169: add basic phylib support



Add basic phylib support to r8169. All now unneeded old PHY handling code
will be removed in subsequent patches.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fcaccc82
......@@ -99,6 +99,7 @@ config R8169
depends on PCI
select FW_LOADER
select CRC32
select PHYLIB
select MII
---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
......
......@@ -16,6 +16,7 @@
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/if_vlan.h>
#include <linux/crc32.h>
#include <linux/in.h>
......@@ -754,6 +755,7 @@ struct rtl8169_private {
} wk;
struct mii_if_info mii;
struct mii_bus *mii_bus;
dma_addr_t counters_phys_addr;
struct rtl8169_counters *counters;
struct rtl8169_tc_offsets tc_offset;
......@@ -1444,11 +1446,6 @@ static unsigned int rtl8169_xmii_reset_pending(struct rtl8169_private *tp)
return rtl_readphy(tp, MII_BMCR) & BMCR_RESET;
}
static unsigned int rtl8169_xmii_link_ok(struct rtl8169_private *tp)
{
return RTL_R8(tp, PHYstatus) & LinkStatus;
}
static void rtl8169_xmii_reset_enable(struct rtl8169_private *tp)
{
unsigned int val;
......@@ -1513,25 +1510,6 @@ static void rtl_link_chg_patch(struct rtl8169_private *tp)
}
}
static void rtl8169_check_link_status(struct net_device *dev,
struct rtl8169_private *tp)
{
struct device *d = tp_to_dev(tp);
if (rtl8169_xmii_link_ok(tp)) {
rtl_link_chg_patch(tp);
/* This is to cancel a scheduled suspend if there's one. */
pm_request_resume(d);
netif_carrier_on(dev);
if (net_ratelimit())
netif_info(tp, ifup, dev, "link up\n");
} else {
netif_carrier_off(dev);
netif_info(tp, ifdown, dev, "link down\n");
pm_runtime_idle(d);
}
}
#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
static u32 __rtl8169_get_wol(struct rtl8169_private *tp)
......@@ -6221,7 +6199,6 @@ static void rtl_reset_work(struct rtl8169_private *tp)
napi_enable(&tp->napi);
rtl_hw_start(tp);
netif_wake_queue(dev);
rtl8169_check_link_status(dev, tp);
}
static void rtl8169_tx_timeout(struct net_device *dev)
......@@ -6838,7 +6815,7 @@ static void rtl_slow_event_work(struct rtl8169_private *tp)
rtl8169_pcierr_interrupt(dev);
if (status & LinkChg)
rtl8169_check_link_status(dev, tp);
phy_mac_interrupt(dev->phydev);
rtl_irq_enable_all(tp);
}
......@@ -6920,10 +6897,52 @@ static void rtl8169_rx_missed(struct net_device *dev)
RTL_W32(tp, RxMissed, 0);
}
static void r8169_phylink_handler(struct net_device *ndev)
{
struct rtl8169_private *tp = netdev_priv(ndev);
if (netif_carrier_ok(ndev)) {
rtl_link_chg_patch(tp);
pm_request_resume(&tp->pci_dev->dev);
} else {
pm_runtime_idle(&tp->pci_dev->dev);
}
if (net_ratelimit())
phy_print_status(ndev->phydev);
}
static int r8169_phy_connect(struct rtl8169_private *tp)
{
struct phy_device *phydev = mdiobus_get_phy(tp->mii_bus, 0);
phy_interface_t phy_mode;
int ret;
phy_mode = tp->mii.supports_gmii ? PHY_INTERFACE_MODE_GMII :
PHY_INTERFACE_MODE_MII;
ret = phy_connect_direct(tp->dev, phydev, r8169_phylink_handler,
phy_mode);
if (ret)
return ret;
if (!tp->mii.supports_gmii)
phy_set_max_speed(phydev, SPEED_100);
/* Ensure to advertise everything, incl. pause */
phydev->advertising = phydev->supported;
phy_attached_info(phydev);
return 0;
}
static void rtl8169_down(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
phy_stop(dev->phydev);
napi_disable(&tp->napi);
netif_stop_queue(dev);
......@@ -6963,6 +6982,8 @@ static int rtl8169_close(struct net_device *dev)
cancel_work_sync(&tp->wk.work);
phy_disconnect(dev->phydev);
pci_free_irq(pdev, 0, tp);
dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
......@@ -7023,6 +7044,10 @@ static int rtl_open(struct net_device *dev)
if (retval < 0)
goto err_release_fw_2;
retval = r8169_phy_connect(tp);
if (retval)
goto err_free_irq;
rtl_lock_work(tp);
set_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags);
......@@ -7038,16 +7063,17 @@ static int rtl_open(struct net_device *dev)
if (!rtl8169_init_counter_offsets(tp))
netif_warn(tp, hw, dev, "counter reset/update failed\n");
phy_start(dev->phydev);
netif_start_queue(dev);
rtl_unlock_work(tp);
pm_runtime_put_sync(&pdev->dev);
rtl8169_check_link_status(dev, tp);
out:
return retval;
err_free_irq:
pci_free_irq(pdev, 0, tp);
err_release_fw_2:
rtl_release_firmware(tp);
rtl8169_rx_clear(tp);
......@@ -7126,6 +7152,7 @@ static void rtl8169_net_suspend(struct net_device *dev)
if (!netif_running(dev))
return;
phy_stop(dev->phydev);
netif_device_detach(dev);
netif_stop_queue(dev);
......@@ -7158,6 +7185,8 @@ static void __rtl8169_resume(struct net_device *dev)
rtl_pll_power_up(tp);
rtl8169_init_phy(dev, tp);
phy_start(tp->dev->phydev);
rtl_lock_work(tp);
napi_enable(&tp->napi);
set_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags);
......@@ -7303,6 +7332,7 @@ static void rtl_remove_one(struct pci_dev *pdev)
netif_napi_del(&tp->napi);
unregister_netdev(dev);
mdiobus_unregister(tp->mii_bus);
rtl_release_firmware(tp);
......@@ -7388,6 +7418,65 @@ DECLARE_RTL_COND(rtl_rxtx_empty_cond)
return (RTL_R8(tp, MCU) & RXTX_EMPTY) == RXTX_EMPTY;
}
static int r8169_mdio_read_reg(struct mii_bus *mii_bus, int phyaddr, int phyreg)
{
struct rtl8169_private *tp = mii_bus->priv;
if (phyaddr > 0)
return -ENODEV;
return rtl_readphy(tp, phyreg);
}
static int r8169_mdio_write_reg(struct mii_bus *mii_bus, int phyaddr,
int phyreg, u16 val)
{
struct rtl8169_private *tp = mii_bus->priv;
if (phyaddr > 0)
return -ENODEV;
rtl_writephy(tp, phyreg, val);
return 0;
}
static int r8169_mdio_register(struct rtl8169_private *tp)
{
struct pci_dev *pdev = tp->pci_dev;
struct phy_device *phydev;
struct mii_bus *new_bus;
int ret;
new_bus = devm_mdiobus_alloc(&pdev->dev);
if (!new_bus)
return -ENOMEM;
new_bus->name = "r8169";
new_bus->priv = tp;
new_bus->parent = &pdev->dev;
new_bus->irq[0] = PHY_IGNORE_INTERRUPT;
snprintf(new_bus->id, MII_BUS_ID_SIZE, "r8169-%x",
PCI_DEVID(pdev->bus->number, pdev->devfn));
new_bus->read = r8169_mdio_read_reg;
new_bus->write = r8169_mdio_write_reg;
ret = mdiobus_register(new_bus);
if (ret)
return ret;
phydev = mdiobus_get_phy(new_bus, 0);
if (!phydev) {
mdiobus_unregister(new_bus);
return -ENODEV;
}
tp->mii_bus = new_bus;
return 0;
}
static void rtl_hw_init_8168g(struct rtl8169_private *tp)
{
u32 data;
......@@ -7644,10 +7733,14 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_drvdata(pdev, dev);
rc = register_netdev(dev);
if (rc < 0)
rc = r8169_mdio_register(tp);
if (rc)
return rc;
rc = register_netdev(dev);
if (rc)
goto err_mdio_unregister;
netif_info(tp, probe, dev, "%s, %pM, XID %08x, IRQ %d\n",
rtl_chip_infos[chipset].name, dev->dev_addr,
(u32)(RTL_R32(tp, TxConfig) & 0xfcf0f8ff),
......@@ -7662,12 +7755,14 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (r8168_check_dash(tp))
rtl8168_driver_start(tp);
netif_carrier_off(dev);
if (pci_dev_run_wake(pdev))
pm_runtime_put_sync(&pdev->dev);
return 0;
err_mdio_unregister:
mdiobus_unregister(tp->mii_bus);
return rc;
}
static struct pci_driver rtl8169_pci_driver = {
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment