Commit 01acf691 authored by Adam Lee's avatar Adam Lee Committed by Chris Ball
Browse files

mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts



Add O2Micro/BayHubTech SD Host DeviceId 8520 support.
Add O2Micro/BayHubTech SD Host DeviceId 8420 & 8421 support.
Add O2Micro/BayHubTech SD Host DeviceId 8620 & 8621 support.

These card readers are used in laptops like Lenovo ThinkPad W540,
Dell Latitude E5440, Dell Latitude E6540.

Signed-off-by: default avatarPeter Guo <peter.guo@bayhubtech.com>
Signed-off-by: default avatarAdam Lee <adam.lee@canonical.com>
Signed-off-by: default avatarChris Ball <chris@printf.net>
parent 522624f9
......@@ -9,6 +9,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-o2micro.o
obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o
......
/*
* Copyright (C) 2013 BayHub Technology Ltd.
*
* Authors: Peter Guo <peter.guo@bayhubtech.com>
* Adam Lee <adam.lee@canonical.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/pci.h>
#include "sdhci.h"
#include "sdhci-pci.h"
#include "sdhci-pci-o2micro.h"
void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
{
u32 scratch_32;
int ret;
/* Improve write performance for SD3.0 */
ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
if (ret)
return;
scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);
/* Enable Link abnormal reset generating Reset */
ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
if (ret)
return;
scratch_32 &= ~((1 << 19) | (1 << 11));
scratch_32 |= (1 << 10);
pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);
/* set card power over current protection */
ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
if (ret)
return;
scratch_32 |= (1 << 4);
pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);
/* adjust the output delay for SD mode */
pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);
/* Set the output voltage setting of Aux 1.2v LDO */
ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
if (ret)
return;
scratch_32 &= ~(3 << 12);
pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);
/* Set Max power supply capability of SD host */
ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0x01FE);
scratch_32 |= 0x00CC;
pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
/* Set DLL Tuning Window */
ret = pci_read_config_dword(chip->pdev,
O2_SD_TUNING_CTRL, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0x000000FF);
scratch_32 |= 0x00000066;
pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);
/* Set UHS2 T_EIDLE */
ret = pci_read_config_dword(chip->pdev,
O2_SD_UHS2_L1_CTRL, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0x000000FC);
scratch_32 |= 0x00000084;
pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);
/* Set UHS2 Termination */
ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
if (ret)
return;
scratch_32 &= ~((1 << 21) | (1 << 30));
/* Set RTD3 function disabled */
scratch_32 |= ((1 << 29) | (1 << 28));
pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
/* Set L1 Entrance Timer */
ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0xf0000000);
scratch_32 |= 0x30000000;
pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_MISC_CTRL4, &scratch_32);
if (ret)
return;
scratch_32 &= ~(0x000f0000);
scratch_32 |= 0x00080000;
pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
}
EXPORT_SYMBOL_GPL(sdhci_pci_o2_fujin2_pci_init);
int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
{
struct sdhci_pci_chip *chip;
struct sdhci_host *host;
u32 reg;
chip = slot->chip;
host = slot->host;
switch (chip->pdev->device) {
case PCI_DEVICE_ID_O2_SDS0:
case PCI_DEVICE_ID_O2_SEABIRD0:
case PCI_DEVICE_ID_O2_SEABIRD1:
case PCI_DEVICE_ID_O2_SDS1:
case PCI_DEVICE_ID_O2_FUJIN2:
reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
if (reg & 0x1)
host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
break;
/* set dll watch dog timer */
reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
reg |= (1 << 12);
sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
break;
default:
break;
}
return 0;
}
EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe_slot);
int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
{
int ret;
u8 scratch;
u32 scratch_32;
switch (chip->pdev->device) {
case PCI_DEVICE_ID_O2_8220:
case PCI_DEVICE_ID_O2_8221:
case PCI_DEVICE_ID_O2_8320:
case PCI_DEVICE_ID_O2_8321:
/* This extra setup is required due to broken ADMA. */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
/* Set Multi 3 to VCC3V# */
pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
/* Disable CLK_REQ# support after media DET */
ret = pci_read_config_byte(chip->pdev,
O2_SD_CLKREQ, &scratch);
if (ret)
return ret;
scratch |= 0x20;
pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
/* Choose capabilities, enable SDMA. We have to write 0x01
* to the capabilities register first to unlock it.
*/
ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
if (ret)
return ret;
scratch |= 0x01;
pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
/* Disable ADMA1/2 */
pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
/* Disable the infinite transfer mode */
ret = pci_read_config_byte(chip->pdev,
O2_SD_INF_MOD, &scratch);
if (ret)
return ret;
scratch |= 0x08;
pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
case PCI_DEVICE_ID_O2_SDS0:
case PCI_DEVICE_ID_O2_SDS1:
case PCI_DEVICE_ID_O2_FUJIN2:
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
/* Set timeout CLK */
ret = pci_read_config_dword(chip->pdev,
O2_SD_CLK_SETTING, &scratch_32);
if (ret)
return ret;
scratch_32 &= ~(0xFF00);
scratch_32 |= 0x07E0C800;
pci_write_config_dword(chip->pdev,
O2_SD_CLK_SETTING, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_CLKREQ, &scratch_32);
if (ret)
return ret;
scratch_32 |= 0x3;
pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_PLL_SETTING, &scratch_32);
if (ret)
return ret;
scratch_32 &= ~(0x1F3F070E);
scratch_32 |= 0x18270106;
pci_write_config_dword(chip->pdev,
O2_SD_PLL_SETTING, scratch_32);
/* Disable UHS1 funciton */
ret = pci_read_config_dword(chip->pdev,
O2_SD_CAP_REG2, &scratch_32);
if (ret)
return ret;
scratch_32 &= ~(0xE0);
pci_write_config_dword(chip->pdev,
O2_SD_CAP_REG2, scratch_32);
if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
sdhci_pci_o2_fujin2_pci_init(chip);
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
case PCI_DEVICE_ID_O2_SEABIRD0:
case PCI_DEVICE_ID_O2_SEABIRD1:
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG0, &scratch_32);
if ((scratch_32 & 0xff000000) == 0x01000000) {
scratch_32 &= 0x0000FFFF;
scratch_32 |= 0x1F340000;
pci_write_config_dword(chip->pdev,
O2_SD_PLL_SETTING, scratch_32);
} else {
scratch_32 &= 0x0000FFFF;
scratch_32 |= 0x2c280000;
pci_write_config_dword(chip->pdev,
O2_SD_PLL_SETTING, scratch_32);
ret = pci_read_config_dword(chip->pdev,
O2_SD_FUNC_REG4,
&scratch_32);
scratch_32 |= (1 << 22);
pci_write_config_dword(chip->pdev,
O2_SD_FUNC_REG4, scratch_32);
}
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
}
return 0;
}
EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe);
int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
{
sdhci_pci_o2_probe(chip);
return 0;
}
EXPORT_SYMBOL_GPL(sdhci_pci_o2_resume);
/*
* Copyright (C) 2013 BayHub Technology Ltd.
*
* Authors: Peter Guo <peter.guo@bayhubtech.com>
* Adam Lee <adam.lee@canonical.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __SDHCI_PCI_O2MICRO_H
#define __SDHCI_PCI_O2MICRO_H
#include "sdhci-pci.h"
/*
* O2Micro device IDs
*/
#define PCI_DEVICE_ID_O2_SDS0 0x8420
#define PCI_DEVICE_ID_O2_SDS1 0x8421
#define PCI_DEVICE_ID_O2_FUJIN2 0x8520
#define PCI_DEVICE_ID_O2_SEABIRD0 0x8620
#define PCI_DEVICE_ID_O2_SEABIRD1 0x8621
/*
* O2Micro device registers
*/
#define O2_SD_MISC_REG5 0x64
#define O2_SD_LD0_CTRL 0x68
#define O2_SD_DEV_CTRL 0x88
#define O2_SD_LOCK_WP 0xD3
#define O2_SD_TEST_REG 0xD4
#define O2_SD_FUNC_REG0 0xDC
#define O2_SD_MULTI_VCC3V 0xEE
#define O2_SD_CLKREQ 0xEC
#define O2_SD_CAPS 0xE0
#define O2_SD_ADMA1 0xE2
#define O2_SD_ADMA2 0xE7
#define O2_SD_INF_MOD 0xF1
#define O2_SD_MISC_CTRL4 0xFC
#define O2_SD_TUNING_CTRL 0x300
#define O2_SD_PLL_SETTING 0x304
#define O2_SD_CLK_SETTING 0x328
#define O2_SD_CAP_REG2 0x330
#define O2_SD_CAP_REG0 0x334
#define O2_SD_UHS1_CAP_SETTING 0x33C
#define O2_SD_DELAY_CTRL 0x350
#define O2_SD_UHS2_L1_CTRL 0x35C
#define O2_SD_FUNC_REG3 0x3E0
#define O2_SD_FUNC_REG4 0x3E4
#define O2_SD_VENDOR_SETTING 0x110
#define O2_SD_VENDOR_SETTING2 0x1C8
extern void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip);
extern int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot);
extern int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip);
extern int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip);
#endif /* __SDHCI_PCI_O2MICRO_H */
......@@ -28,6 +28,7 @@
#include "sdhci.h"
#include "sdhci-pci.h"
#include "sdhci-pci-o2micro.h"
/*****************************************************************************\
* *
......@@ -321,65 +322,6 @@ static const struct sdhci_pci_fixes sdhci_intel_mrfl_mmc = {
#define O2_SD_ADMA2 0xE7
#define O2_SD_INF_MOD 0xF1
static int o2_probe(struct sdhci_pci_chip *chip)
{
int ret;
u8 scratch;
switch (chip->pdev->device) {
case PCI_DEVICE_ID_O2_8220:
case PCI_DEVICE_ID_O2_8221:
case PCI_DEVICE_ID_O2_8320:
case PCI_DEVICE_ID_O2_8321:
/* This extra setup is required due to broken ADMA. */
ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
/* Set Multi 3 to VCC3V# */
pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
/* Disable CLK_REQ# support after media DET */
ret = pci_read_config_byte(chip->pdev, O2_SD_CLKREQ, &scratch);
if (ret)
return ret;
scratch |= 0x20;
pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
/* Choose capabilities, enable SDMA. We have to write 0x01
* to the capabilities register first to unlock it.
*/
ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
if (ret)
return ret;
scratch |= 0x01;
pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
/* Disable ADMA1/2 */
pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
/* Disable the infinite transfer mode */
ret = pci_read_config_byte(chip->pdev, O2_SD_INF_MOD, &scratch);
if (ret)
return ret;
scratch |= 0x08;
pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
/* Lock WP */
ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
if (ret)
return ret;
scratch |= 0x80;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
}
return 0;
}
static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
{
u8 scratch;
......@@ -570,7 +512,10 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
}
static const struct sdhci_pci_fixes sdhci_o2 = {
.probe = o2_probe,
.probe = sdhci_pci_o2_probe,
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.probe_slot = sdhci_pci_o2_probe_slot,
.resume = sdhci_pci_o2_resume,
};
static const struct sdhci_pci_fixes sdhci_jmicron = {
......@@ -983,6 +928,46 @@ static const struct pci_device_id pci_ids[] = {
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
{
.vendor = PCI_VENDOR_ID_O2,
.device = PCI_DEVICE_ID_O2_FUJIN2,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
{
.vendor = PCI_VENDOR_ID_O2,
.device = PCI_DEVICE_ID_O2_SDS0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
{
.vendor = PCI_VENDOR_ID_O2,
.device = PCI_DEVICE_ID_O2_SDS1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
{
.vendor = PCI_VENDOR_ID_O2,
.device = PCI_DEVICE_ID_O2_SEABIRD0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
{
.vendor = PCI_VENDOR_ID_O2,
.device = PCI_DEVICE_ID_O2_SEABIRD1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment