Commit c7cd630a authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Ulf Hansson
Browse files

mmc: tmio: fix never-detected card insertion bug



The TMIO mmc cannot detect the card insertion in native_hotplug mode
if the driver is probed without a card inserted.

The reason is obvious; all IRQs are disabled by tmio_mmc_host_probe(),
as follows:

  tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);

The card event IRQs are first enabled by tmio_mmc_start_command() as
follows:

  if (!host->native_hotplug)
          irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
  tmio_mmc_enable_mmc_irqs(host, irq_mask);

If the driver is probed without a card, tmio_mmc_start_command() is
never called in the first place.  So, the card is never detected.

The card event IRQs must be enabled in probe/resume functions.

Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Tested-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
parent 497d1f96
......@@ -350,8 +350,6 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host,
c |= TRANSFER_READ;
}
if (!host->native_hotplug)
irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
tmio_mmc_enable_mmc_irqs(host, irq_mask);
/* Fire off the command */
......@@ -1280,11 +1278,13 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
irq_mask |= TMIO_MASK_READOP;
if (!_host->chan_tx)
irq_mask |= TMIO_MASK_WRITEOP;
if (!_host->native_hotplug)
irq_mask &= ~(TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
_host->sdcard_irq_mask &= ~irq_mask;
if (_host->native_hotplug)
tmio_mmc_enable_mmc_irqs(_host,
TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
spin_lock_init(&_host->lock);
mutex_init(&_host->ios_lock);
......@@ -1382,6 +1382,10 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
if (host->clk_cache)
tmio_mmc_set_clock(host, host->clk_cache);
if (host->native_hotplug)
tmio_mmc_enable_mmc_irqs(host,
TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
tmio_mmc_enable_dma(host, true);
if (tmio_mmc_can_retune(host) && host->select_tuning(host))
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment