Commit c8ae9c2d authored by Sudeep Holla's avatar Sudeep Holla
Browse files

reset: Add support for resets provided by SCMI



On some ARM based systems, a separate Cortex-M based System Control
Processor(SCP) provides the overall power, clock, reset and system
control. System Control and Management Interface(SCMI) Message Protocol
is defined for the communication between the Application Cores(AP)
and the SCP.

Adds support for the resets provided using SCMI protocol for performing
reset management of various devices present on the SoC. Various reset
functionalities are achieved by the means of different ARM SCMI device
operations provided by the ARM SCMI framework.
Reviewed-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sudeep Holla's avatarSudeep Holla <sudeep.holla@arm.com>
parent 95a15d80
...@@ -15545,6 +15545,7 @@ F: drivers/clk/clk-sc[mp]i.c ...@@ -15545,6 +15545,7 @@ F: drivers/clk/clk-sc[mp]i.c
F: drivers/cpufreq/sc[mp]i-cpufreq.c F: drivers/cpufreq/sc[mp]i-cpufreq.c
F: drivers/firmware/arm_scpi.c F: drivers/firmware/arm_scpi.c
F: drivers/firmware/arm_scmi/ F: drivers/firmware/arm_scmi/
F: drivers/reset/reset-scmi.c
F: include/linux/sc[mp]i_protocol.h F: include/linux/sc[mp]i_protocol.h
SYSTEM RESET/SHUTDOWN DRIVERS SYSTEM RESET/SHUTDOWN DRIVERS
......
...@@ -116,6 +116,17 @@ config RESET_QCOM_PDC ...@@ -116,6 +116,17 @@ config RESET_QCOM_PDC
to control reset signals provided by PDC for Modem, Compute, to control reset signals provided by PDC for Modem, Compute,
Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
config RESET_SCMI
tristate "Reset driver controlled via ARM SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
default ARM_SCMI_PROTOCOL
help
This driver provides support for reset signal/domains that are
controlled by firmware that implements the SCMI interface.
This driver uses SCMI Message Protocol to interact with the
firmware controlling all the reset signals.
config RESET_SIMPLE config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST bool "Simple Reset Controller Driver" if COMPILE_TEST
default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN
......
...@@ -18,6 +18,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o ...@@ -18,6 +18,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* ARM System Control and Management Interface (ARM SCMI) reset driver
*
* Copyright (C) 2019 ARM Ltd.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/device.h>
#include <linux/reset-controller.h>
#include <linux/scmi_protocol.h>
/**
* struct scmi_reset_data - reset controller information structure
* @rcdev: reset controller entity
* @handle: ARM SCMI handle used for communication with system controller
*/
struct scmi_reset_data {
struct reset_controller_dev rcdev;
const struct scmi_handle *handle;
};
#define to_scmi_reset_data(p) container_of((p), struct scmi_reset_data, rcdev)
#define to_scmi_handle(p) (to_scmi_reset_data(p)->handle)
/**
* scmi_reset_assert() - assert device reset
* @rcdev: reset controller entity
* @id: ID of the reset to be asserted
*
* This function implements the reset driver op to assert a device's reset
* using the ARM SCMI protocol.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int
scmi_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
{
const struct scmi_handle *handle = to_scmi_handle(rcdev);
return handle->reset_ops->assert(handle, id);
}
/**
* scmi_reset_deassert() - deassert device reset
* @rcdev: reset controller entity
* @id: ID of the reset to be deasserted
*
* This function implements the reset driver op to deassert a device's reset
* using the ARM SCMI protocol.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int
scmi_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
{
const struct scmi_handle *handle = to_scmi_handle(rcdev);
return handle->reset_ops->deassert(handle, id);
}
/**
* scmi_reset_reset() - reset the device
* @rcdev: reset controller entity
* @id: ID of the reset signal to be reset(assert + deassert)
*
* This function implements the reset driver op to trigger a device's
* reset signal using the ARM SCMI protocol.
*
* Return: 0 for successful request, else a corresponding error value
*/
static int
scmi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id)
{
const struct scmi_handle *handle = to_scmi_handle(rcdev);
return handle->reset_ops->reset(handle, id);
}
static const struct reset_control_ops scmi_reset_ops = {
.assert = scmi_reset_assert,
.deassert = scmi_reset_deassert,
.reset = scmi_reset_reset,
};
static int scmi_reset_probe(struct scmi_device *sdev)
{
struct scmi_reset_data *data;
struct device *dev = &sdev->dev;
struct device_node *np = dev->of_node;
const struct scmi_handle *handle = sdev->handle;
if (!handle || !handle->reset_ops)
return -ENODEV;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->rcdev.ops = &scmi_reset_ops;
data->rcdev.owner = THIS_MODULE;
data->rcdev.of_node = np;
data->rcdev.nr_resets = handle->reset_ops->num_domains_get(handle);
return devm_reset_controller_register(dev, &data->rcdev);
}
static const struct scmi_device_id scmi_id_table[] = {
{ SCMI_PROTOCOL_RESET },
{ },
};
MODULE_DEVICE_TABLE(scmi, scmi_id_table);
static struct scmi_driver scmi_reset_driver = {
.name = "scmi-reset",
.probe = scmi_reset_probe,
.id_table = scmi_id_table,
};
module_scmi_driver(scmi_reset_driver);
MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
MODULE_DESCRIPTION("ARM SCMI reset controller driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment