Commit e382ab74 authored by tianshuliang's avatar tianshuliang Committed by Ulf Hansson
Browse files

mmc: dw_mmc: add support for hi3798cv200 specific extensions of dw-mshc



Hi3798CV200 SoC extends the dw-mshc controller for additional clock
and bus control. Add support for these extensions.

Signed-off-by: default avatartianshuliang <tianshuliang@hisilicon.com>
Signed-off-by: default avatarJiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Reviewed-by: default avatarShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent 8a9cdf98
......@@ -718,6 +718,15 @@ config MMC_DW_EXYNOS
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on Exynos4 and Exynos5 SoC's.
config MMC_DW_HI3798CV200
tristate "Hi3798CV200 specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW
select MMC_DW_PLTFM
help
This selects support for HiSilicon Hi3798CV200 SoC specific extensions to the
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on HiSilicon Hi3798CV200 SoC.
config MMC_DW_K3
tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW
......
......@@ -51,6 +51,7 @@ obj-$(CONFIG_MMC_CAVIUM_THUNDERX) += thunderx-mmc.o
obj-$(CONFIG_MMC_DW) += dw_mmc.o
obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o
obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o
obj-$(CONFIG_MMC_DW_HI3798CV200) += dw_mmc-hi3798cv200.o
obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o
obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018 HiSilicon Technologies Co., Ltd.
*/
#include <linux/clk.h>
#include <linux/mfd/syscon.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include "dw_mmc.h"
#include "dw_mmc-pltfm.h"
#define ALL_INT_CLR 0x1ffff
struct hi3798cv200_priv {
struct clk *sample_clk;
struct clk *drive_clk;
};
static void dw_mci_hi3798cv200_set_ios(struct dw_mci *host, struct mmc_ios *ios)
{
struct hi3798cv200_priv *priv = host->priv;
u32 val;
val = mci_readl(host, UHS_REG);
if (ios->timing == MMC_TIMING_MMC_DDR52 ||
ios->timing == MMC_TIMING_UHS_DDR50)
val |= SDMMC_UHS_DDR;
else
val &= ~SDMMC_UHS_DDR;
mci_writel(host, UHS_REG, val);
val = mci_readl(host, ENABLE_SHIFT);
if (ios->timing == MMC_TIMING_MMC_DDR52)
val |= SDMMC_ENABLE_PHASE;
else
val &= ~SDMMC_ENABLE_PHASE;
mci_writel(host, ENABLE_SHIFT, val);
val = mci_readl(host, DDR_REG);
if (ios->timing == MMC_TIMING_MMC_HS400)
val |= SDMMC_DDR_HS400;
else
val &= ~SDMMC_DDR_HS400;
mci_writel(host, DDR_REG, val);
if (ios->timing == MMC_TIMING_MMC_HS ||
ios->timing == MMC_TIMING_LEGACY)
clk_set_phase(priv->drive_clk, 180);
else if (ios->timing == MMC_TIMING_MMC_HS200)
clk_set_phase(priv->drive_clk, 135);
}
static int dw_mci_hi3798cv200_execute_tuning(struct dw_mci_slot *slot,
u32 opcode)
{
int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 };
struct dw_mci *host = slot->host;
struct hi3798cv200_priv *priv = host->priv;
int raise_point = -1, fall_point = -1;
int err, prev_err = -1;
int found = 0;
int i;
for (i = 0; i < ARRAY_SIZE(degrees); i++) {
clk_set_phase(priv->sample_clk, degrees[i]);
mci_writel(host, RINTSTS, ALL_INT_CLR);
err = mmc_send_tuning(slot->mmc, opcode, NULL);
if (!err)
found = 1;
if (i > 0) {
if (err && !prev_err)
fall_point = i - 1;
if (!err && prev_err)
raise_point = i;
}
if (raise_point != -1 && fall_point != -1)
goto tuning_out;
prev_err = err;
err = 0;
}
tuning_out:
if (found) {
if (raise_point == -1)
raise_point = 0;
if (fall_point == -1)
fall_point = ARRAY_SIZE(degrees) - 1;
if (fall_point < raise_point) {
if ((raise_point + fall_point) >
(ARRAY_SIZE(degrees) - 1))
i = fall_point / 2;
else
i = (raise_point + ARRAY_SIZE(degrees) - 1) / 2;
} else {
i = (raise_point + fall_point) / 2;
}
clk_set_phase(priv->sample_clk, degrees[i]);
dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n",
raise_point, fall_point, degrees[i]);
} else {
dev_err(host->dev, "No valid clk_sample shift! use default\n");
err = -EINVAL;
}
mci_writel(host, RINTSTS, ALL_INT_CLR);
return err;
}
static int dw_mci_hi3798cv200_init(struct dw_mci *host)
{
struct hi3798cv200_priv *priv;
int ret;
priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->sample_clk = devm_clk_get(host->dev, "ciu-sample");
if (IS_ERR(priv->sample_clk)) {
dev_err(host->dev, "failed to get ciu-sample clock\n");
return PTR_ERR(priv->sample_clk);
}
priv->drive_clk = devm_clk_get(host->dev, "ciu-drive");
if (IS_ERR(priv->drive_clk)) {
dev_err(host->dev, "failed to get ciu-drive clock\n");
return PTR_ERR(priv->drive_clk);
}
ret = clk_prepare_enable(priv->sample_clk);
if (ret) {
dev_err(host->dev, "failed to enable ciu-sample clock\n");
return ret;
}
ret = clk_prepare_enable(priv->drive_clk);
if (ret) {
dev_err(host->dev, "failed to enable ciu-drive clock\n");
goto disable_sample_clk;
}
host->priv = priv;
return 0;
disable_sample_clk:
clk_disable_unprepare(priv->sample_clk);
return ret;
}
static const struct dw_mci_drv_data hi3798cv200_data = {
.init = dw_mci_hi3798cv200_init,
.set_ios = dw_mci_hi3798cv200_set_ios,
.execute_tuning = dw_mci_hi3798cv200_execute_tuning,
};
static int dw_mci_hi3798cv200_probe(struct platform_device *pdev)
{
return dw_mci_pltfm_register(pdev, &hi3798cv200_data);
}
static int dw_mci_hi3798cv200_remove(struct platform_device *pdev)
{
struct dw_mci *host = platform_get_drvdata(pdev);
struct hi3798cv200_priv *priv = host->priv;
clk_disable_unprepare(priv->drive_clk);
clk_disable_unprepare(priv->sample_clk);
return dw_mci_pltfm_remove(pdev);
}
static const struct of_device_id dw_mci_hi3798cv200_match[] = {
{ .compatible = "hisilicon,hi3798cv200-dw-mshc", },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_hi3798cv200_match);
static struct platform_driver dw_mci_hi3798cv200_driver = {
.probe = dw_mci_hi3798cv200_probe,
.remove = dw_mci_hi3798cv200_remove,
.driver = {
.name = "dwmmc_hi3798cv200",
.of_match_table = dw_mci_hi3798cv200_match,
},
};
module_platform_driver(dw_mci_hi3798cv200_driver);
MODULE_DESCRIPTION("HiSilicon Hi3798CV200 Specific DW-MSHC Driver Extension");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:dwmmc_hi3798cv200");
......@@ -314,6 +314,7 @@ struct dw_mci_board {
#define SDMMC_BUFADDR 0x098
#define SDMMC_CDTHRCTL 0x100
#define SDMMC_UHS_REG_EXT 0x108
#define SDMMC_DDR_REG 0x10c
#define SDMMC_ENABLE_SHIFT 0x110
#define SDMMC_DATA(x) (x)
/*
......@@ -439,7 +440,12 @@ struct dw_mci_board {
#define SDMMC_CARD_WR_THR_EN BIT(2)
#define SDMMC_CARD_RD_THR_EN BIT(0)
/* UHS-1 register defines */
#define SDMMC_UHS_DDR BIT(16)
#define SDMMC_UHS_18V BIT(0)
/* DDR register defines */
#define SDMMC_DDR_HS400 BIT(31)
/* Enable shift register defines */
#define SDMMC_ENABLE_PHASE BIT(0)
/* All ctrl reset bits */
#define SDMMC_CTRL_ALL_RESET_FLAGS \
(SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment