Commit e51df6ce authored by Ben Chuang's avatar Ben Chuang Committed by Ulf Hansson
Browse files

mmc: host: sdhci-pci: Add Genesys Logic GL975x support



Add support for the GL9750 and GL9755 chipsets.

Enable v4 mode and wait 5ms after set 1.8V signal enable for GL9750/
GL9755. Fix the value of SDHCI_MAX_CURRENT register and use the vendor
tuning flow for GL9750.
Co-developed-by: default avatarMichael K Johnson <johnsonm@danlj.org>
Signed-off-by: default avatarMichael K Johnson <johnsonm@danlj.org>
Signed-off-by: default avatarBen Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent b960bc44
...@@ -94,6 +94,7 @@ config MMC_SDHCI_PCI ...@@ -94,6 +94,7 @@ config MMC_SDHCI_PCI
depends on MMC_SDHCI && PCI depends on MMC_SDHCI && PCI
select MMC_CQHCI select MMC_CQHCI
select IOSF_MBI if X86 select IOSF_MBI if X86
select MMC_SDHCI_IO_ACCESSORS
help help
This selects the PCI Secure Digital Host Controller Interface. This selects the PCI Secure Digital Host Controller Interface.
Most controllers found today are PCI devices. Most controllers found today are PCI devices.
......
...@@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o ...@@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \ sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
sdhci-pci-dwc-mshc.o sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
......
...@@ -1685,6 +1685,8 @@ static const struct pci_device_id pci_ids[] = { ...@@ -1685,6 +1685,8 @@ static const struct pci_device_id pci_ids[] = {
SDHCI_PCI_DEVICE(O2, SEABIRD1, o2), SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan), SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps), SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd), SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
/* Generic SD host controller */ /* Generic SD host controller */
{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)}, {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
......
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Genesys Logic, Inc.
*
* Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
*
* Version: v0.9.0 (2019-08-08)
*/
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/pci.h>
#include <linux/mmc/mmc.h>
#include <linux/delay.h>
#include "sdhci.h"
#include "sdhci-pci.h"
/* Genesys Logic extra registers */
#define SDHCI_GLI_9750_WT 0x800
#define SDHCI_GLI_9750_WT_EN BIT(0)
#define GLI_9750_WT_EN_ON 0x1
#define GLI_9750_WT_EN_OFF 0x0
#define SDHCI_GLI_9750_DRIVING 0x860
#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0)
#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26)
#define GLI_9750_DRIVING_1_VALUE 0xFFF
#define GLI_9750_DRIVING_2_VALUE 0x3
#define SDHCI_GLI_9750_PLL 0x864
#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
#define GLI_9750_PLL_TX2_INV_VALUE 0x1
#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
#define SDHCI_GLI_9750_SW_CTRL 0x874
#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
#define GLI_9750_SW_CTRL_4_VALUE 0x3
#define SDHCI_GLI_9750_MISC 0x878
#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2)
#define SDHCI_GLI_9750_MISC_RX_INV BIT(3)
#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4)
#define GLI_9750_MISC_TX1_INV_VALUE 0x0
#define GLI_9750_MISC_RX_INV_ON 0x1
#define GLI_9750_MISC_RX_INV_OFF 0x0
#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF
#define GLI_9750_MISC_TX1_DLY_VALUE 0x5
#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4)
#define GLI_9750_TUNING_CONTROL_EN_ON 0x1
#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16)
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19)
#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1
#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2
#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
#define GLI_MAX_TUNING_LOOP 40
/* Genesys Logic chipset */
static inline void gl9750_wt_on(struct sdhci_host *host)
{
u32 wt_value;
u32 wt_enable;
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
if (wt_enable == GLI_9750_WT_EN_ON)
return;
wt_value &= ~SDHCI_GLI_9750_WT_EN;
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
}
static inline void gl9750_wt_off(struct sdhci_host *host)
{
u32 wt_value;
u32 wt_enable;
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
if (wt_enable == GLI_9750_WT_EN_OFF)
return;
wt_value &= ~SDHCI_GLI_9750_WT_EN;
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
}
static void gli_set_9750(struct sdhci_host *host)
{
u32 driving_value;
u32 pll_value;
u32 sw_ctrl_value;
u32 misc_value;
u32 parameter_value;
u32 control_value;
u16 ctrl2;
gl9750_wt_on(host);
driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
GLI_9750_DRIVING_1_VALUE);
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
GLI_9750_DRIVING_2_VALUE);
sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
GLI_9750_SW_CTRL_4_VALUE);
sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
/* reset the tuning flow after reinit and before starting tuning */
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
GLI_9750_PLL_TX2_INV_VALUE);
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
GLI_9750_PLL_TX2_DLY_VALUE);
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
GLI_9750_MISC_TX1_INV_VALUE);
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_VALUE);
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
GLI_9750_MISC_TX1_DLY_VALUE);
parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
/* disable tuned clk */
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
/* enable tuning parameters control */
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
GLI_9750_TUNING_CONTROL_EN_ON);
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
/* write tuning parameters */
sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
/* disable tuning parameters control */
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
GLI_9750_TUNING_CONTROL_EN_OFF);
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
/* clear tuned clk */
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
gl9750_wt_off(host);
}
static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
{
u32 misc_value;
gl9750_wt_on(host);
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
if (b) {
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_ON);
} else {
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_OFF);
}
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
gl9750_wt_off(host);
}
static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
{
int i;
int rx_inv;
for (rx_inv = 0; rx_inv < 2; rx_inv++) {
gli_set_9750_rx_inv(host, !!rx_inv);
sdhci_start_tuning(host);
for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
u16 ctrl;
sdhci_send_tuning(host, opcode);
if (!host->tuning_done) {
sdhci_abort_tuning(host, opcode);
break;
}
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
if (ctrl & SDHCI_CTRL_TUNED_CLK)
return 0; /* Success! */
break;
}
}
}
if (!host->tuning_done) {
pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
return -ETIMEDOUT;
}
pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
sdhci_reset_tuning(host);
return -EAGAIN;
}
static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
{
host->mmc->retune_period = 0;
if (host->tuning_mode == SDHCI_TUNING_MODE_1)
host->mmc->retune_period = host->tuning_count;
gli_set_9750(host);
host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
sdhci_end_tuning(host);
return 0;
}
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
return 0;
}
static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
return 0;
}
static void sdhci_gli_voltage_switch(struct sdhci_host *host)
{
/*
* According to Section 3.6.1 signal voltage switch procedure in
* SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
* follows:
* (6) Set 1.8V Signal Enable in the Host Control 2 register.
* (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
* period.
* (8) If 1.8V Signal Enable is cleared by Host Controller, go to
* step (12).
*
* Wait 5ms after set 1.8V signal enable in Host Control 2 register
* to ensure 1.8V signal enable bit is set by GL9750/GL9755.
*/
usleep_range(5000, 5500);
}
static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
gli_set_9750(host);
}
static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
{
u32 value;
value = readl(host->ioaddr + reg);
if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff)))
value |= 0xc8;
return value;
}
static const struct sdhci_ops sdhci_gl9755_ops = {
.set_clock = sdhci_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.voltage_switch = sdhci_gli_voltage_switch,
};
const struct sdhci_pci_fixes sdhci_gl9755 = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
.probe_slot = gli_probe_slot_gl9755,
.ops = &sdhci_gl9755_ops,
};
static const struct sdhci_ops sdhci_gl9750_ops = {
.read_l = sdhci_gl9750_readl,
.set_clock = sdhci_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_gl9750_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.voltage_switch = sdhci_gli_voltage_switch,
.platform_execute_tuning = gl9750_execute_tuning,
};
const struct sdhci_pci_fixes sdhci_gl9750 = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
.probe_slot = gli_probe_slot_gl9750,
.ops = &sdhci_gl9750_ops,
};
...@@ -68,6 +68,9 @@ ...@@ -68,6 +68,9 @@
#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202 #define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
#define PCI_DEVICE_ID_GLI_9755 0x9755
#define PCI_DEVICE_ID_GLI_9750 0x9750
/* /*
* PCI device class and mask * PCI device class and mask
*/ */
...@@ -188,5 +191,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host); ...@@ -188,5 +191,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
extern const struct sdhci_pci_fixes sdhci_arasan; extern const struct sdhci_pci_fixes sdhci_arasan;
extern const struct sdhci_pci_fixes sdhci_snps; extern const struct sdhci_pci_fixes sdhci_snps;
extern const struct sdhci_pci_fixes sdhci_o2; extern const struct sdhci_pci_fixes sdhci_o2;
extern const struct sdhci_pci_fixes sdhci_gl9750;
extern const struct sdhci_pci_fixes sdhci_gl9755;
#endif /* __SDHCI_PCI_H */ #endif /* __SDHCI_PCI_H */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment