1. 18 Sep, 2019 2 commits
  2. 14 Sep, 2019 1 commit
  3. 13 Sep, 2019 5 commits
    • Bjørn Mork's avatar
      cdc_ether: fix rndis support for Mediatek based smartphones · 4d7ffcf3
      Bjørn Mork authored
      A Mediatek based smartphone owner reports problems with USB
      tethering in Linux.  The verbose USB listing shows a rndis_host
      interface pair (e0/01/03 + 10/00/00), but the driver fails to
      bind with
      [  355.960428] usb 1-4: bad CDC descriptors
      The problem is a failsafe test intended to filter out ACM serial
      functions using the same 02/02/ff class/subclass/protocol as RNDIS.
      The serial functions are recognized by their non-zero bmCapabilities.
      No RNDIS function with non-zero bmCapabilities were known at the time
      this failsafe was added. But it turns out that some Wireless class
      RNDIS functions are using the bmCapabilities field. These functions
      are uniquely identified as RNDIS by their class/subclass/protocol, so
      the failing test can safely be disabled.  The same applies to the two
      types of Misc class RNDIS functions.
      Applying the failsafe to Communication class functions only retains
      the original functionality, and fixes the problem for the Mediatek based
      Tow examples of CDC functional descriptors with non-zero bmCapabilities
      from Wireless class RNDIS functions are:
      0e8d:000a  Mediatek Crosscall Spider X5 3G Phone
            CDC Header:
              bcdCDC               1.10
            CDC ACM:
              bmCapabilities       0x0f
                connection notifications
                sends break
                line coding and serial state
                get/set/clear comm features
            CDC Union:
              bMasterInterface        0
              bSlaveInterface         1
            CDC Call Management:
              bmCapabilities       0x03
                call management
                use DataInterface
              bDataInterface          1
      19d2:1023  ZTE K4201-z
            CDC Header:
              bcdCDC               1.10
            CDC ACM:
              bmCapabilities       0x02
                line coding and serial state
            CDC Call Management:
              bmCapabilities       0x03
                call management
                use DataInterface
              bDataInterface          1
            CDC Union:
              bMasterInterface        0
              bSlaveInterface         1
      The Mediatek example is believed to apply to most smartphones with
      Mediatek firmware.  The ZTE example is most likely also part of a larger
      family of devices/firmwares.
      Suggested-by: default avatarLars Melin <larsm17@gmail.com>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Jeff Kirsher's avatar
      ixgbevf: Fix secpath usage for IPsec Tx offload · 8f6617ba
      Jeff Kirsher authored
      Port the same fix for ixgbe to ixgbevf.
      The ixgbevf driver currently does IPsec Tx offloading
      based on an existing secpath. However, the secpath
      can also come from the Rx side, in this case it is
      misinterpreted for Tx offload and the packets are
      dropped with a "bad sa_idx" error. Fix this by using
      the xfrm_offload() function to test for Tx offload.
      CC: Shannon Nelson <snelson@pensando.io>
      Fixes: 7f68d430
       ("ixgbevf: enable VF IPsec offload operations")
      Reported-by: default avatarJonathan Tooker <jonathan@reliablehosting.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Acked-by: default avatarShannon Nelson <snelson@pensando.io>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Ulf Hansson's avatar
      mmc: tmio: Fixup runtime PM management during remove · 87b5d602
      Ulf Hansson authored
      Accessing the device when it may be runtime suspended is a bug, which is
      the case in tmio_mmc_host_remove(). Let's fix the behaviour.
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Tested-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
    • Ulf Hansson's avatar
      mmc: tmio: Fixup runtime PM management during probe · aa86f1a3
      Ulf Hansson authored
      The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the
      runtime PM status of the device, as to make it reflect the current status
      of the HW. This works fine for most cases, but unfortunate not for all.
      Especially, there is a generic problem when the device has a genpd attached
      and that genpd have the ->start|stop() callbacks assigned.
      More precisely, if the driver calls pm_runtime_set_active() during
      ->probe(), genpd does not get to invoke the ->start() callback for it,
      which means the HW isn't really fully powered on. Furthermore, in the next
      phase, when the device becomes runtime suspended, genpd will invoke the
      ->stop() callback for it, potentially leading to usage count imbalance
      problems, depending on what's implemented behind the callbacks of course.
      To fix this problem, convert to call pm_runtime_get_sync() from
      tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to
      avoid bumping usage counters and unnecessary re-initializing the HW the
      first time the tmio driver's ->runtime_resume() callback is called,
      introduce a state flag to keeping track of this.
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Tested-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
    • Ulf Hansson's avatar
      Revert "mmc: tmio: move runtime PM enablement to the driver implementations" · 8861474a
      Ulf Hansson authored
      This reverts commit 7ff21319.
      It turns out that the above commit introduces other problems. For example,
      calling pm_runtime_set_active() must not be done prior calling
      pm_runtime_enable() as that makes it fail. This leads to additional
      problems, such as clock enables being wrongly balanced.
      Rather than fixing the problem on top, let's start over by doing a revert.
      Fixes: 7ff21319
       ("mmc: tmio: move runtime PM enablement to the driver implementations")
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Tested-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
  4. 12 Sep, 2019 3 commits
    • Chris Wilson's avatar
      Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()" · 505a8ec7
      Chris Wilson authored
      The userptr put_pages can be called from inside try_to_unmap, and so
      enters with the page lock held on one of the object's backing pages. We
      cannot take the page lock ourselves for fear of recursion.
      Reported-by: default avatarLionel Landwerlin <lionel.g.landwerlin@intel.com>
      Reported-by: default avatarMartin Wilck <Martin.Wilck@suse.com>
      Reported-by: default avatarLeo Kraav <leho@kraav.com>
      Fixes: aa56a292 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
      References: https://bugzilla.kernel.org/show_bug.cgi?id=203317
      Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
      Cc: Jani Nikula <jani.nikula@intel.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Steffen Klassert's avatar
      ixgbe: Fix secpath usage for IPsec TX offload. · f39b683d
      Steffen Klassert authored
      The ixgbe driver currently does IPsec TX offloading
      based on an existing secpath. However, the secpath
      can also come from the RX side, in this case it is
      misinterpreted for TX offload and the packets are
      dropped with a "bad sa_idx" error. Fix this by using
      the xfrm_offload() function to test for TX offload.
      Fixes: 59259470
       ("ixgbe: process the Tx ipsec offload")
      Reported-by: default avatarMichael Marley <michael@michaelmarley.com>
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Yang Yingliang's avatar
      tun: fix use-after-free when register netdev failed · 77f22f92
      Yang Yingliang authored
      I got a UAF repport in tun driver when doing fuzzy test:
      [  466.269490] ==================================================================
      [  466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0
      [  466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699
      [  466.271810]
      [  466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427
      [  466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
      [  466.271838] Call Trace:
      [  466.271858]  dump_stack+0xca/0x13e
      [  466.271871]  ? tun_chr_read_iter+0x2ca/0x2d0
      [  466.271890]  print_address_description+0x79/0x440
      [  466.271906]  ? vprintk_func+0x5e/0xf0
      [  466.271920]  ? tun_chr_read_iter+0x2ca/0x2d0
      [  466.271935]  __kasan_report+0x15c/0x1df
      [  466.271958]  ? tun_chr_read_iter+0x2ca/0x2d0
      [  466.271976]  kasan_report+0xe/0x20
      [  466.271987]  tun_chr_read_iter+0x2ca/0x2d0
      [  466.272013]  do_iter_readv_writev+0x4b7/0x740
      [  466.272032]  ? default_llseek+0x2d0/0x2d0
      [  466.272072]  do_iter_read+0x1c5/0x5e0
      [  466.272110]  vfs_readv+0x108/0x180
      [  466.299007]  ? compat_rw_copy_check_uvector+0x440/0x440
      [  466.299020]  ? fsnotify+0x888/0xd50
      [  466.299040]  ? __fsnotify_parent+0xd0/0x350
      [  466.299064]  ? fsnotify_first_mark+0x1e0/0x1e0
      [  466.304548]  ? vfs_write+0x264/0x510
      [  466.304569]  ? ksys_write+0x101/0x210
      [  466.304591]  ? do_preadv+0x116/0x1a0
      [  466.304609]  do_preadv+0x116/0x1a0
      [  466.309829]  do_syscall_64+0xc8/0x600
      [  466.309849]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
      [  466.309861] RIP: 0033:0x4560f9
      [  466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
      [  466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127
      [  466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9
      [  466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003
      [  466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000
      [  466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10
      [  466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000
      [  466.323057]
      [  466.323064] Allocated by task 2605:
      [  466.335165]  save_stack+0x19/0x80
      [  466.336240]  __kasan_kmalloc.constprop.8+0xa0/0xd0
      [  466.337755]  kmem_cache_alloc+0xe8/0x320
      [  466.339050]  getname_flags+0xca/0x560
      [  466.340229]  user_path_at_empty+0x2c/0x50
      [  466.341508]  vfs_statx+0xe6/0x190
      [  466.342619]  __do_sys_newstat+0x81/0x100
      [  466.343908]  do_syscall_64+0xc8/0x600
      [  466.345303]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
      [  466.347034]
      [  466.347517] Freed by task 2605:
      [  466.348471]  save_stack+0x19/0x80
      [  466.349476]  __kasan_slab_free+0x12e/0x180
      [  466.350726]  kmem_cache_free+0xc8/0x430
      [  466.351874]  putname+0xe2/0x120
      [  466.352921]  filename_lookup+0x257/0x3e0
      [  466.354319]  vfs_statx+0xe6/0x190
      [  466.355498]  __do_sys_newstat+0x81/0x100
      [  466.356889]  do_syscall_64+0xc8/0x600
      [  466.358037]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
      [  466.359567]
      [  466.360050] The buggy address belongs to the object at ffff888372139100
      [  466.360050]  which belongs to the cache names_cache of size 4096
      [  466.363735] The buggy address is located 336 bytes inside of
      [  466.363735]  4096-byte region [ffff888372139100, ffff88837213a100)
      [  466.367179] The buggy address belongs to the page:
      [  466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0
      [  466.371582] flags: 0x2fffff80010200(slab|head)
      [  466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00
      [  466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
      [  466.377778] page dumped because: kasan: bad access detected
      [  466.379730]
      [  466.380288] Memory state around the buggy address:
      [  466.381844]  ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      [  466.384009]  ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      [  466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      [  466.388257]                                                  ^
      [  466.390234]  ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      [  466.392512]  ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      [  466.394667] ==================================================================
      tun_chr_read_iter() accessed the memory which freed by free_netdev()
      called by tun_set_iff():
              CPUA                                           CPUB
          register_netdevice() <-- inject error
          goto err_detach
          tun_detach_all() <-- set RCV_SHUTDOWN
          free_netdev() <-- called from
                           err_free_dev path
            netdev_freemem() <-- free the memory
                              without check refcount
            (In this path, the refcount cannot prevent
             freeing the memory of dev, and the memory
             will be used by dev_put() called by
             tun_chr_read_iter() on CPUB.)
                                                           (Break from tun_ring_recv(),
                                                           because RCV_SHUTDOWN is set)
                                                           dev_put() <-- use the memory
                                                                         freed by netdev_freemem()
      Put the publishing of tfile->tun after register_netdevice(),
      so tun_get() won't get the tun pointer that freed by
      err_detach path if register_netdevice() failed.
      Fixes: eb0fb363
       ("tuntap: attach queue 0 before registering netdevice")
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Suggested-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarYang Yingliang <yangyingliang@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
  5. 11 Sep, 2019 14 commits
  6. 10 Sep, 2019 3 commits
  7. 09 Sep, 2019 6 commits
  8. 07 Sep, 2019 5 commits
    • Fred Lotter's avatar
      nfp: flower: cmsg rtnl locks can timeout reify messages · 28abe579
      Fred Lotter authored
      Flower control message replies are handled in different locations. The truly
      high priority replies are handled in the BH (tasklet) context, while the
      remaining replies are handled in a predefined Linux work queue. The work
      queue handler orders replies into high and low priority groups, and always
      start servicing the high priority replies within the received batch first.
      Reply Type:			Rtnl Lock:	Handler:
      CMSG_TYPE_PORT_MOD		no		BH tasklet (mtu)
      CMSG_TYPE_TUN_NEIGH		no		BH tasklet
      CMSG_TYPE_FLOW_STATS		no		BH tasklet
      CMSG_TYPE_PORT_REIFY		no		WQ high
      CMSG_TYPE_PORT_MOD		yes		WQ high (link/mtu)
      CMSG_TYPE_MERGE_HINT		yes		WQ low
      CMSG_TYPE_NO_NEIGH		no		WQ low
      CMSG_TYPE_QOS_STATS		no		WQ low
      CMSG_TYPE_LAG_CONFIG		no		WQ low
      A subset of control messages can block waiting for an rtnl lock (from both
      work queue priority groups). The rtnl lock is heavily contended for by
      external processes such as systemd-udevd, systemd-network and libvirtd,
      especially during netdev creation, such as when flower VFs and representors
      are instantiated.
      Kernel netlink instrumentation shows that external processes (such as
      systemd-udevd) often use successive rtnl_trylock() sequences, which can result
      in an rtnl_lock() blocked control message to starve for longer periods of time
      during rtnl lock contention, i.e. netdev creation.
      In the current design a single blocked control message will block the entire
      work queue (both priorities), and introduce a latency which is
      nondeterministic and dependent on system wide rtnl lock usage.
      In some extreme cases, one blocked control message at exactly the wrong time,
      just before the maximum number of VFs are instantiated, can block the work
      queue for long enough to prevent VF representor REIFY replies from getting
      handled in time for the 40ms timeout.
      The firmware will deliver the total maximum number of REIFY message replies in
      around 300us.
      Only REIFY and MTU update messages require replies within a timeout period (of
      40ms). The MTU-only updates are already done directly in the BH (tasklet)
      Move the REIFY handler down into the BH (tasklet) in order to resolve timeouts
      caused by a blocked work queue waiting on rtnl locks.
      Signed-off-by: default avatarFred Lotter <frederik.lotter@netronome.com>
      Signed-off-by: default avatarSimon Horman <simon.horman@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Eric Biggers's avatar
      isdn/capi: check message length in capi_write() · fe163e53
      Eric Biggers authored
      syzbot reported:
          BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
          CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2
          Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
          Call Trace:
            __dump_stack lib/dump_stack.c:77 [inline]
            dump_stack+0x173/0x1d0 lib/dump_stack.c:113
            kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
            __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
            capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
            do_loop_readv_writev fs/read_write.c:703 [inline]
            do_iter_write+0x83e/0xd80 fs/read_write.c:961
            vfs_writev fs/read_write.c:1004 [inline]
            do_writev+0x397/0x840 fs/read_write.c:1039
            __do_sys_writev fs/read_write.c:1112 [inline]
            __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109
            __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109
            do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
      The problem is that capi_write() is reading past the end of the message.
      Fix it by checking the message's length in the needed places.
      Reported-and-tested-by: default avatar <syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com>
      Signed-off-by: default avatarEric Biggers <ebiggers@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Juliet Kim's avatar
      net/ibmvnic: free reset work of removed device from queue · 1c2977c0
      Juliet Kim authored
      Commit 36f1031c ("ibmvnic: Do not process reset during or after
       device removal") made the change to exit reset if the driver has been
      removed, but does not free reset work items of the adapter from queue.
      Ensure all reset work items are freed when breaking out of the loop early.
      Fixes: 36f1031c
       ("ibmnvic: Do not process reset during or after device removal”)
      Signed-off-by: default avatarJuliet Kim <julietk@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Stefan Chulski's avatar
      net: phylink: Fix flow control resolution · 63b2ed4e
      Stefan Chulski authored
      Regarding to IEEE 802.3-2015 standard section 2
      28B.3 Priority resolution - Table 28-3 - Pause resolution
      In case of Local device Pause=1 AsymDir=0, Link partner
      Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
      transmit, disable PAUSE receive.
      And in case of Local device Pause=1 AsymDir=1, Link partner
      Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
      receive, disable PAUSE transmit.
      Fixes: 9525ae83
       ("phylink: add phylink infrastructure")
      Signed-off-by: default avatarStefan Chulski <stefanc@marvell.com>
      Reported-by: default avatarShaul Ben-Mayor <shaulb@marvell.com>
      Acked-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Christophe JAILLET's avatar
      net/hamradio/6pack: Fix the size of a sk_buff used in 'sp_bump()' · b82573fd
      Christophe JAILLET authored
      We 'allocate' 'count' bytes here. In fact, 'dev_alloc_skb' already add some
      extra space for padding, so a bit more is allocated.
      However, we use 1 byte for the KISS command, then copy 'count' bytes, so
      count+1 bytes.
      Explicitly allocate and use 1 more byte to be safe.
      Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
  9. 06 Sep, 2019 1 commit