Commit 53b4d591 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes for 4.11-rc4 that resolve a
  number of tiny reported issues. All of these have been in linux-next
  for a while with no reported issues"

* tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration
  iio: adc: ti_am335x_adc: fix fifo overrun recovery
  iio: sw-device: Fix config group initialization
  iio: magnetometer: ak8974: remove incorrect __exit markups
  iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
parents e431e0e4 43c49938
......@@ -169,7 +169,9 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct tiadc_device *adc_dev = iio_priv(indio_dev);
unsigned int status, config;
unsigned int status, config, adc_fsm;
unsigned short count = 0;
status = tiadc_readl(adc_dev, REG_IRQSTATUS);
/*
......@@ -183,6 +185,15 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
tiadc_writel(adc_dev, REG_CTRL, config);
tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
/* wait for idle state.
* ADC needs to finish the current conversion
* before disabling the module
*/
do {
adc_fsm = tiadc_readl(adc_dev, REG_ADCFSM);
} while (adc_fsm != 0x10 && count++ < 100);
tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
return IRQ_HANDLED;
} else if (status & IRQENB_FIFO1THRES) {
......
......@@ -51,8 +51,6 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
st->report_state.report_id,
st->report_state.index,
HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM);
poll_value = hid_sensor_read_poll_value(st);
} else {
int val;
......@@ -89,7 +87,9 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
st->power_state.index,
sizeof(state_val), &state_val);
if (state && poll_value)
if (state)
poll_value = hid_sensor_read_poll_value(st);
if (poll_value > 0)
msleep_interruptible(poll_value * 2);
return 0;
......
......@@ -193,8 +193,8 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
if (err < 0)
goto out;
fifo_watermark = ((data & ~ST_LSM6DSX_FIFO_TH_MASK) << 8) |
(fifo_watermark & ST_LSM6DSX_FIFO_TH_MASK);
fifo_watermark = ((data << 8) & ~ST_LSM6DSX_FIFO_TH_MASK) |
(fifo_watermark & ST_LSM6DSX_FIFO_TH_MASK);
wdata = cpu_to_le16(fifo_watermark);
err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_FIFO_THL_ADDR,
......
......@@ -763,7 +763,7 @@ power_off:
return ret;
}
static int __exit ak8974_remove(struct i2c_client *i2c)
static int ak8974_remove(struct i2c_client *i2c)
{
struct iio_dev *indio_dev = i2c_get_clientdata(i2c);
struct ak8974 *ak8974 = iio_priv(indio_dev);
......@@ -845,7 +845,7 @@ static struct i2c_driver ak8974_driver = {
.of_match_table = of_match_ptr(ak8974_of_match),
},
.probe = ak8974_probe,
.remove = __exit_p(ak8974_remove),
.remove = ak8974_remove,
.id_table = ak8974_id,
};
module_i2c_driver(ak8974_driver);
......
......@@ -62,7 +62,7 @@ void iio_swd_group_init_type_name(struct iio_sw_device *d,
const char *name,
struct config_item_type *type)
{
#ifdef CONFIG_CONFIGFS_FS
#if IS_ENABLED(CONFIG_CONFIGFS_FS)
config_group_init_type_name(&d->group, name, type);
#endif
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment