Commit c8ca631f authored by Yendapally Reddy Dhananjaya Reddy's avatar Yendapally Reddy Dhananjaya Reddy Committed by Kishon Vijay Abraham I
Browse files

dt-bindings: phy: Add documentation for NSP USB3 PHY



Add documentation for USB3 PHY available in Northstar plus SoC

Signed-off-by: default avatarYendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 42020c70
Broadcom USB3 phy binding for northstar plus SoC
The USB3 phy is internal to the SoC and is accessed using mdio interface.
Required mdio bus properties:
- reg: Should be 0x0 for SoC internal USB3 phy
- #address-cells: must be 1
- #size-cells: must be 0
Required USB3 PHY properties:
- compatible: should be "brcm,nsp-usb3-phy"
- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
- usb3-ctrl-syscon: handler of syscon node defining physical address
of usb3 control register.
- #phy-cells: must be 0
Required usb3 control properties:
- compatible: should be "brcm,nsp-usb3-ctrl"
- reg: offset and length of the control registers
Example:
mdio@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
usb3_phy: usb-phy@10 {
compatible = "brcm,nsp-usb3-phy";
reg = <0x10>;
usb3-ctrl-syscon = <&usb3_ctrl>;
#phy-cells = <0>;
status = "disabled";
};
};
usb3_ctrl: syscon@104408 {
compatible = "brcm,nsp-usb3-ctrl", "syscon";
reg = <0x104408 0x3fc>;
};
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment