drm/i915/gen11: Start distinguishing 'phy' from 'port'
Our past DDI-based Intel platforms have had a fixed DDI<->PHY mapping. Because of this, both the bspec documentation and our i915 code has used the term "port" when talking about either DDI's or PHY's; it was always easy to tell what terms like "Port A" were referring to from the context. Unfortunately this is starting to break down now that EHL allows PHY-A to be driven by either DDI-A or DDI-D. Is a setup with DDI-D driving PHY-A considered "Port A" or "Port D?" The answer depends on which register we're working with, and even the bspec doesn't do a great job of clarifying this. Let's try to be more explicit about whether we're talking about the DDI or the PHY on gen11+ by using 'port' to refer to the DDI and creating a new 'enum phy' namespace to refer to the PHY in use. This patch just adds the new PHY namespace, new phy-based versions of intel_port_is_*(), and a helper to convert a port to a PHY. Transitioning various areas of the code over to using the PHY namespace will be done in subsequent patches to make review easier. We'll remove the intel_port_is_*() functions at the end of the series when we transition all callers over to using the PHY-based versions. v2: - Convert a few more 'port' uses to 'phy.' (Sparse) v3: - Switch DDI_CLK_SEL() back to 'port.' (Jose) - Add a code comment clarifying why DPCLKA_CFGCR0_ICL needs to use PHY for its bit definitions, even though the register description is given in terms of DDI. - To avoid confusion, switch CNL's DPCLKA_CFGCR0 defines back to using port and create separate ICL+ definitions that work in terms of PHY. v4: - Rebase and resolve conflicts with Imre's TC series. - This patch now just adds the namespace and a few convenience functions; the important changes are now split out into separate patches to make review easier. Suggested-by: Ville Syrjala <email@example.com> Cc: José Roberto de Souza <firstname.lastname@example.org> Cc: Lucas De Marchi <email@example.com> Cc: Ville Syrjälä <firstname.lastname@example.org> Cc: Imre Deak <email@example.com> Cc: Jani Nikula <firstname.lastname@example.org> Signed-off-by: Matt Roper <email@example.com> Reviewed-by: Ville Syrjälä <firstname.lastname@example.org> Link: https://email@example.com