Commit 09c4c57f authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller
Browse files

net: phy: aquantia: add support for auto-negotiation configuration



Make use of the generic c45 code, plus code specific to the Aquantia
phy for 1000BaseT negotiation.

Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0974f1f0
......@@ -20,6 +20,10 @@
#define PHY_ID_AQCS109 0x03a1b5c2
#define PHY_ID_AQR405 0x03a1b4b0
#define MDIO_AN_VEND_PROV 0xc400
#define MDIO_AN_VEND_PROV_1000BASET_FULL BIT(15)
#define MDIO_AN_VEND_PROV_1000BASET_HALF BIT(14)
#define MDIO_AN_TX_VEND_STATUS1 0xc800
#define MDIO_AN_TX_VEND_STATUS1_10BASET (0x0 << 1)
#define MDIO_AN_TX_VEND_STATUS1_100BASETX (0x1 << 1)
......@@ -64,10 +68,40 @@
static int aqr_config_aneg(struct phy_device *phydev)
{
linkmode_copy(phydev->supported, phy_10gbit_features);
linkmode_copy(phydev->advertising, phydev->supported);
bool changed = false;
u16 reg;
int ret;
return 0;
if (phydev->autoneg == AUTONEG_DISABLE)
return genphy_c45_pma_setup_forced(phydev);
ret = genphy_c45_an_config_aneg(phydev);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
/* Clause 45 has no standardized support for 1000BaseT, therefore
* use vendor registers for this mode.
*/
reg = 0;
if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
phydev->advertising))
reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
phydev->advertising))
reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
MDIO_AN_VEND_PROV_1000BASET_HALF |
MDIO_AN_VEND_PROV_1000BASET_FULL, reg);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
return genphy_c45_check_and_restart_aneg(phydev, changed);
}
static int aqr_config_intr(struct phy_device *phydev)
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment