Commit 4c9847b7 authored by Mathieu Malaterre's avatar Mathieu Malaterre Committed by Rob Herring
Browse files

dt-bindings: Remove leading 0x from bindings notation

Improve the binding example by removing all the leading 0x to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

Converted using the following command:

find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} +

This is a follow up to commit 48c926cd

Signed-off-by: default avatarMathieu Malaterre <malat@debian.org>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 6de67de3
......@@ -15,7 +15,7 @@ Required properties:
Example:
ccn@0x2000000000 {
ccn@2000000000 {
compatible = "arm,ccn-504";
reg = <0x20 0x00000000 0 0x1000000>;
interrupts = <0 181 4>;
......
......@@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use:
interrupts = <GIC_SPI request_number interrupt_level>
Example:
device_x@0x4a023000 {
device_x@4a023000 {
/* Crossbar 8 used */
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
...
......
......@@ -8,7 +8,7 @@ Required properties:
- interrupts : Should contain MC General interrupt.
Example:
memory-controller@0x7000f000 {
memory-controller@7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
......
......@@ -17,7 +17,7 @@ Optional properties:
- clock-output-names : From common clock binding.
Example:
clock@0xff000000 {
clock@ff000000 {
compatible = "adi,axi-clkgen";
#clock-cells = <0>;
reg = <0xff000000 0x1000>;
......
......@@ -23,7 +23,7 @@ Example:
clocks = <&clk_osc>;
};
aux: aux@0x7e215004 {
aux: aux@7e215004 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
reg = <0x7e215000 0x8>;
......
......@@ -24,7 +24,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
clock: clock-controller@0x10030000 {
clock: clock-controller@10030000 {
compatible = "samsung,exynos4210-clock";
reg = <0x10030000 0x20000>;
#clock-cells = <1>;
......
......@@ -22,7 +22,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
clock: clock-controller@0x10010000 {
clock: clock-controller@10010000 {
compatible = "samsung,exynos5250-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
......
......@@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below.
#clock-cells = <0>;
};
clock: clock-controller@0x10010000 {
clock: clock-controller@10010000 {
compatible = "samsung,exynos5410-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
......
......@@ -23,7 +23,7 @@ tree sources.
Example 1: An example of a clock controller node is listed below.
clock: clock-controller@0x10010000 {
clock: clock-controller@10010000 {
compatible = "samsung,exynos5420-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
......
......@@ -21,7 +21,7 @@ tree sources.
Example: An example of a clock controller node is listed below.
clock: clock-controller@0x10010000 {
clock: clock-controller@10010000 {
compatible = "samsung,exynos5440-clock";
reg = <0x160000 0x10000>;
#clock-cells = <1>;
......
......@@ -14,7 +14,7 @@ Required properties:
Example:
pllctrl: pll-controller@0x02310000 {
pllctrl: pll-controller@02310000 {
compatible = "ti,keystone-pllctrl", "syscon";
reg = <0x02310000 0x200>;
};
......@@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
for the full list of zx296702 clock IDs.
topclk: topcrm@0x09800000 {
topclk: topcrm@09800000 {
compatible = "zte,zx296702-topcrm-clk";
reg = <0x09800000 0x1000>;
#clock-cells = <1>;
};
uart0: serial@0x09405000 {
uart0: serial@09405000 {
compatible = "zte,zx296702-uart";
reg = <0x09405000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -456,7 +456,7 @@ System ON/OFF key driver
Definition: this is phandle to the register map node.
EXAMPLE:
snvs-pwrkey@0x020cc000 {
snvs-pwrkey@020cc000 {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <0 4 0x4>
......@@ -545,7 +545,7 @@ FULL EXAMPLE
interrupts = <93 2>;
};
snvs-pwrkey@0x020cc000 {
snvs-pwrkey@020cc000 {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&sec_mon>;
interrupts = <0 4 0x4>;
......
......@@ -9,7 +9,7 @@ Required properties:
- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
Example:
dfi: dfi@0xff630000 {
dfi: dfi@ff630000 {
compatible = "rockchip,rk3399-dfi";
reg = <0x00 0xff630000 0x00 0x4000>;
rockchip,pmu = <&pmugrf>;
......
......@@ -27,7 +27,7 @@ Optional properties:
Example:
fb0: fb@0x00500000 {
fb0: fb@00500000 {
compatible = "atmel,at91sam9g45-lcdc";
reg = <0x00500000 0x1000>;
interrupts = <23 3 0>;
......@@ -41,7 +41,7 @@ Example:
Example for fixed framebuffer memory:
fb0: fb@0x00500000 {
fb0: fb@00500000 {
compatible = "atmel,at91sam9263-lcdc";
reg = <0x00700000 0x1000 0x70000000 0x200000>;
[...]
......
......@@ -73,7 +73,7 @@ Hypervisor OS configuration:
max-read-transactions = <31>;
channel-reset-timeout-cycles = <0x500>;
hidma_24: dma-controller@0x5c050000 {
hidma_24: dma-controller@5c050000 {
compatible = "qcom,hidma-1.0";
reg = <0 0x5c050000 0x0 0x1000>,
<0 0x5c0b0000 0x0 0x1000>;
......@@ -85,7 +85,7 @@ Hypervisor OS configuration:
Guest OS configuration:
hidma_24: dma-controller@0x5c050000 {
hidma_24: dma-controller@5c050000 {
compatible = "qcom,hidma-1.0";
reg = <0 0x5c050000 0x0 0x1000>,
<0 0x5c0b0000 0x0 0x1000>;
......
......@@ -13,7 +13,7 @@ Required properties:
Example:
Controller:
dma: dma-controller@0x09c00000{
dma: dma-controller@09c00000{
compatible = "zte,zx296702-dma";
reg = <0x09c00000 0x1000>;
clocks = <&topclk ZX296702_DMA_ACLK>;
......
......@@ -30,7 +30,7 @@ Optional properties:
Example:
gpio_altr: gpio@0xff200000 {
gpio_altr: gpio@ff200000 {
compatible = "altr,pio-1.0";
reg = <0xff200000 0x10>;
interrupts = <0 45 4>;
......
......@@ -18,7 +18,7 @@ Optional properties:
Example
/ {
i2c4: i2c4@0x10054000 {
i2c4: i2c4@10054000 {
compatible = "ingenic,jz4780-i2c";
reg = <0x10054000 0x1000>;
......
......@@ -10,7 +10,7 @@ Required properties:
Example:
hp03@0x77 {
hp03@77 {
compatible = "hoperf,hp03";
reg = <0x77>;
xclr-gpio = <&portc 0 0x0>;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment