Commit b3161725 authored by Benoit Parrot's avatar Benoit Parrot Committed by Tony Lindgren
Browse files

ARM: dts: dra7-l4: Add ti-sysc node for CAM



Add CAM nodes as a child of l4 interconnect in order for it to probe
using ti-sysc.

Signed-off-by: default avatarBenoit Parrot <bparrot@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 2baee0c5
......@@ -4166,27 +4166,58 @@
};
target-module@170000 { /* 0x48970000, ap 21 0a.0 */
compatible = "ti,sysc";
status = "disabled";
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x170010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x170000 0x10000>;
status = "disabled";
};
target-module@190000 { /* 0x48990000, ap 23 2e.0 */
compatible = "ti,sysc";
status = "disabled";
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x190010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x190000 0x10000>;
status = "disabled";
};
target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
compatible = "ti,sysc";
status = "disabled";
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x1b0000 0x4>,
<0x1b0010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1b0000 0x10000>;
status = "disabled";
};
target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment