Commit f8404f15 authored by Benoit Parrot's avatar Benoit Parrot Committed by Tony Lindgren
Browse files

ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries



Add VPFE device nodes entries.
Add OmniVision OV2659 sensor device nodes and linkage.

The sensor clock (xvclk) is sourced from clkout1.
Add clock entries to properly select clkout1 and set its parent
clock to sys_clkin_ck.

Signed-off-by: default avatarBenoit Parrot <bparrot@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 01053dad
......@@ -272,6 +272,12 @@
>;
};
clkout1_pin: pinmux_clkout1_pin {
pinctrl-single,pins = <
0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
......@@ -593,6 +599,25 @@
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
ov2659@30 {
compatible = "ovti,ov2659";
reg = <0x30>;
pinctrl-names = "default";
pinctrl-0 = <&clkout1_pin>;
clocks = <&clkout1_mux_ck>;
clock-names = "xvclk";
assigned-clocks = <&clkout1_mux_ck>;
assigned-clock-parents = <&clkout1_osc_div_ck>;
port {
ov2659_1: endpoint {
remote-endpoint = <&vpfe0_ep>;
link-frequencies = /bits/ 64 <70000000>;
};
};
};
edt-ft5306@38 {
status = "okay";
compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
......@@ -877,7 +902,7 @@
/* Camera port */
port {
vpfe0_ep: endpoint {
/* remote-endpoint = <&sensor>; add once we have it */
remote-endpoint = <&ov2659_1>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment