simone.c 3.24 KB
Newer Older
1
// SPDX-License-Identifier: GPL-2.0-or-later
2
3
4
5
/*
 * arch/arm/mach-ep93xx/simone.c
 * Simplemachines Sim.One support.
 *
6
 * Copyright (C) 2010 Ryan Mallon
7
8
9
10
11
12
13
14
15
16
 *
 * Based on the 2.6.24.7 support:
 *   Copyright (C) 2009 Simplemachines
 *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
17
18
19
20
21
22
#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/mmc_spi.h>
#include <linux/platform_data/video-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <linux/gpio.h>
23
#include <linux/gpio/machine.h>
24

25
26
#include "hardware.h"
#include "gpio-ep93xx.h"
27
28
29
30

#include <asm/mach-types.h>
#include <asm/mach/arch.h>

31
32
#include "soc.h"

33
static struct ep93xx_eth_data __initdata simone_eth_data = {
34
35
36
	.phy_id		= 1,
};

37
static struct ep93xxfb_mach_info __initdata simone_fb_info = {
38
39
40
	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
};

41
42
43
static struct mmc_spi_platform_data simone_mmc_spi_data = {
	.detect_delay	= 500,
	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
44
45
46
47
48
49
50
51
52
};

static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
	.dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
	.table = {
		/* Card detect */
		GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
		{ },
	},
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
};

static struct spi_board_info simone_spi_devices[] __initdata = {
	{
		.modalias		= "mmc_spi",
		.platform_data		= &simone_mmc_spi_data,
		/*
		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
		 * will limit it automatically to max. frequency.
		 */
		.max_speed_hz		= 10 * 1000 * 1000,
		.bus_num		= 0,
		.chip_select		= 0,
		.mode			= SPI_MODE_3,
	},
};

70
71
72
73
74
/*
 * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
 * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
 * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
 */
75
static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
76
	.dev_id = "spi0",
77
78
79
80
	.table = {
		GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
		{ },
	},
81
82
};

83
static struct ep93xx_spi_info simone_spi_info __initdata = {
84
	.use_dma = 1,
85
86
};

87
88
89
90
91
92
static struct i2c_board_info __initdata simone_i2c_board_info[] = {
	{
		I2C_BOARD_INFO("ds1337", 0x68),
	},
};

93
94
95
96
97
98
99
100
101
102
103
static struct platform_device simone_audio_device = {
	.name		= "simone-audio",
	.id		= -1,
};

static void __init simone_register_audio(void)
{
	ep93xx_register_ac97();
	platform_device_register(&simone_audio_device);
}

104
105
106
static void __init simone_init_machine(void)
{
	ep93xx_init_devices();
107
	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
108
109
	ep93xx_register_eth(&simone_eth_data, 1);
	ep93xx_register_fb(&simone_fb_info);
110
	ep93xx_register_i2c(simone_i2c_board_info,
111
			    ARRAY_SIZE(simone_i2c_board_info));
112
	gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
113
	gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
114
115
	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
			    ARRAY_SIZE(simone_spi_devices));
116
	simone_register_audio();
117
118
119
}

MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
120
121
	/* Maintainer: Ryan Mallon */
	.atag_offset	= 0x100,
122
123
	.map_io		= ep93xx_map_io,
	.init_irq	= ep93xx_init_irq,
Stephen Warren's avatar
Stephen Warren committed
124
	.init_time	= ep93xx_timer_init,
125
	.init_machine	= simone_init_machine,
126
	.init_late	= ep93xx_init_late,
127
	.restart	= ep93xx_restart,
128
MACHINE_END