Commit 0d1e31ab authored by Linus Walleij's avatar Linus Walleij
Browse files

gpio: tb10x: Use GENERIC_GPIO



Instead of open coding logic for reading and writing GPIO lines,
use the generic GPIO library. Also switch to using the spinlock
from the generic GPIO to protect the registers.

Cc: linux-snps-arc@lists.infradead.org
Acked-by: default avatarChristian Ruppert <christian.ruppert@alitech.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent d28af35b
......@@ -480,6 +480,7 @@ config GPIO_SYSCON
config GPIO_TB10X
bool
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
select OF_GPIO
......
......@@ -45,14 +45,12 @@
/**
* @spinlock: used for atomic read/modify/write of registers
* @base: register base address
* @domain: IRQ domain of GPIO generated interrupts managed by this controller
* @irq: Interrupt line of parent interrupt controller
* @gc: gpio_chip structure associated to this GPIO controller
*/
struct tb10x_gpio {
spinlock_t spinlock;
void __iomem *base;
struct irq_domain *domain;
int irq;
......@@ -76,60 +74,14 @@ static inline void tb10x_set_bits(struct tb10x_gpio *gpio, unsigned int offs,
u32 r;
unsigned long flags;
spin_lock_irqsave(&gpio->spinlock, flags);
spin_lock_irqsave(&gpio->gc.bgpio_lock, flags);
r = tb10x_reg_read(gpio, offs);
r = (r & ~mask) | (val & mask);
tb10x_reg_write(gpio, offs, r);
spin_unlock_irqrestore(&gpio->spinlock, flags);
}
static int tb10x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
{
struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip);
int mask = BIT(offset);
int val = TB10X_GPIO_DIR_IN << offset;
tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val);
return 0;
}
static int tb10x_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip);
int val;
val = tb10x_reg_read(tb10x_gpio, OFFSET_TO_REG_DATA);
if (val & BIT(offset))
return 1;
else
return 0;
}
static void tb10x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip);
int mask = BIT(offset);
int val = value << offset;
tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DATA, mask, val);
}
static int tb10x_gpio_direction_out(struct gpio_chip *chip,
unsigned offset, int value)
{
struct tb10x_gpio *tb10x_gpio = gpiochip_get_data(chip);
int mask = BIT(offset);
int val = TB10X_GPIO_DIR_OUT << offset;
tb10x_gpio_set(chip, offset, value);
tb10x_set_bits(tb10x_gpio, OFFSET_TO_REG_DDR, mask, val);
return 0;
spin_unlock_irqrestore(&gpio->gc.bgpio_lock, flags);
}
static int tb10x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
......@@ -184,8 +136,6 @@ static int tb10x_gpio_probe(struct platform_device *pdev)
if (tb10x_gpio == NULL)
return -ENOMEM;
spin_lock_init(&tb10x_gpio->spinlock);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tb10x_gpio->base = devm_ioremap_resource(dev, mem);
if (IS_ERR(tb10x_gpio->base))
......@@ -196,20 +146,34 @@ static int tb10x_gpio_probe(struct platform_device *pdev)
if (!tb10x_gpio->gc.label)
return -ENOMEM;
tb10x_gpio->gc.parent = &pdev->dev;
tb10x_gpio->gc.owner = THIS_MODULE;
tb10x_gpio->gc.direction_input = tb10x_gpio_direction_in;
tb10x_gpio->gc.get = tb10x_gpio_get;
tb10x_gpio->gc.direction_output = tb10x_gpio_direction_out;
tb10x_gpio->gc.set = tb10x_gpio_set;
tb10x_gpio->gc.request = gpiochip_generic_request;
tb10x_gpio->gc.free = gpiochip_generic_free;
tb10x_gpio->gc.base = -1;
tb10x_gpio->gc.ngpio = ngpio;
tb10x_gpio->gc.can_sleep = false;
ret = devm_gpiochip_add_data(&pdev->dev, &tb10x_gpio->gc, tb10x_gpio);
/*
* Initialize generic GPIO with one single register for reading and setting
* the lines, no special set or clear registers and a data direction register
* wher 1 means "output".
*/
ret = bgpio_init(&tb10x_gpio->gc, dev, 4,
tb10x_gpio->base + OFFSET_TO_REG_DATA,
NULL,
NULL,
tb10x_gpio->base + OFFSET_TO_REG_DDR,
NULL,
0);
if (ret) {
dev_err(dev, "unable to init generic GPIO\n");
return ret;
}
tb10x_gpio->gc.base = -1;
tb10x_gpio->gc.parent = dev;
tb10x_gpio->gc.owner = THIS_MODULE;
/*
* ngpio is set by bgpio_init() but we override it, this .request()
* callback also overrides the one set up by generic GPIO.
*/
tb10x_gpio->gc.ngpio = ngpio;
tb10x_gpio->gc.request = gpiochip_generic_request;
tb10x_gpio->gc.free = gpiochip_generic_free;
ret = devm_gpiochip_add_data(dev, &tb10x_gpio->gc, tb10x_gpio);
if (ret < 0) {
dev_err(dev, "Could not add gpiochip.\n");
return ret;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment