Verified Commit 3ba5368d authored by Kunihiko Hayashi's avatar Kunihiko Hayashi Committed by Mark Brown
Browse files

regulator: uniphier: Add Pro5 USB3 VBUS support



Pro5 SoC has same scheme of USB3 VBUS as Pro4, so the data for Pro5 is
equivalent to Pro4.
Signed-off-by: default avatarKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1568080304-1572-1-git-send-email-hayashi.kunihiko@socionext.com

Signed-off-by: Mark Brown's avatarMark Brown <broonie@kernel.org>
parent 9c86d003
......@@ -13,6 +13,7 @@ this layer. These clocks and resets should be described in each property.
Required properties:
- compatible: Should be
"socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
"socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
"socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
"socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
"socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
......@@ -20,12 +21,12 @@ Required properties:
- clocks: A list of phandles to the clock gate for USB3 glue layer.
According to the clock-names, appropriate clocks are required.
- clock-names: Should contain
"gio", "link" - for Pro4 SoC
"gio", "link" - for Pro4 and Pro5 SoCs
"link" - for others
- resets: A list of phandles to the reset control for USB3 glue layer.
According to the reset-names, appropriate resets are required.
- reset-names: Should contain
"gio", "link" - for Pro4 SoC
"gio", "link" - for Pro4 and Pro5 SoCs
"link" - for others
See Documentation/devicetree/bindings/regulator/regulator.txt
......
......@@ -185,6 +185,10 @@ static const struct of_device_id uniphier_regulator_match[] = {
.compatible = "socionext,uniphier-pro4-usb3-regulator",
.data = &uniphier_pro4_usb3_data,
},
{
.compatible = "socionext,uniphier-pro5-usb3-regulator",
.data = &uniphier_pro4_usb3_data,
},
{
.compatible = "socionext,uniphier-pxs2-usb3-regulator",
.data = &uniphier_pxs2_usb3_data,
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment