Commit 50a03e35 authored by Beniamino Galvani's avatar Beniamino Galvani Committed by Mark Brown
Browse files

regulator: act8865: prepare support for other act88xx devices

This patch prepares support for other devices in the act88xx family of
PMUs manufactured by Active-Semi.

http://www.active-semi.com/products/power-management-units/act88xx/



Signed-off-by: default avatarBeniamino Galvani <b.galvani@gmail.com>
Tested-by: default avatarWenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: default avatarAxel Lin <axel.lin@ingics.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent bbb83f38
/*
* act8865-regulator.c - Voltage regulation for the active-semi ACT8865
* http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
* act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs
*
* http://www.active-semi.com/products/power-management-units/act88xx/
*
* Copyright (C) 2013 Atmel Corporation
*
......@@ -70,7 +71,7 @@ static const struct regmap_config act8865_regmap_config = {
.val_bits = 8,
};
static const struct regulator_linear_range act8865_volatge_ranges[] = {
static const struct regulator_linear_range act8865_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
......@@ -86,110 +87,35 @@ static struct regulator_ops act8865_ops = {
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_desc act8865_reg[] = {
{
.name = "DCDC_REG1",
.id = ACT8865_ID_DCDC1,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC1_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC1_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG2",
.id = ACT8865_ID_DCDC2,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC2_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC2_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG3",
.id = ACT8865_ID_DCDC3,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC3_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC3_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG1",
.id = ACT8865_ID_LDO1,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO1_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO1_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG2",
.id = ACT8865_ID_LDO2,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO2_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO2_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG3",
.id = ACT8865_ID_LDO3,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO3_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO3_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG4",
.id = ACT8865_ID_LDO4,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO4_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO4_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
#define ACT88xx_REG(_name, _family, _id, _vsel_reg) \
[_family##_ID_##_id] = { \
.name = _name, \
.id = _family##_ID_##_id, \
.type = REGULATOR_VOLTAGE, \
.ops = &act8865_ops, \
.n_voltages = ACT8865_VOLTAGE_NUM, \
.linear_ranges = act8865_voltage_ranges, \
.n_linear_ranges = ARRAY_SIZE(act8865_voltage_ranges), \
.vsel_reg = _family##_##_id##_##_vsel_reg, \
.vsel_mask = ACT8865_VSEL_MASK, \
.enable_reg = _family##_##_id##_CTRL, \
.enable_mask = ACT8865_ENA, \
.owner = THIS_MODULE, \
}
static const struct regulator_desc act8865_regulators[] = {
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1),
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1),
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1),
ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET),
ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET),
ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET),
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET),
};
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
{ .compatible = "active-semi,act8865" },
{ .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
{ }
};
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
......@@ -206,7 +132,9 @@ static struct of_regulator_match act8865_matches[] = {
static int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct act8865_platform_data *pdata)
struct act8865_platform_data *pdata,
struct of_regulator_match *matches,
int num_matches)
{
int matched, i;
struct device_node *np;
......@@ -218,26 +146,25 @@ static int act8865_pdata_from_dt(struct device *dev,
return -EINVAL;
}
matched = of_regulator_match(dev, np,
act8865_matches, ARRAY_SIZE(act8865_matches));
matched = of_regulator_match(dev, np, matches, num_matches);
of_node_put(np);
if (matched <= 0)
return matched;
pdata->regulators = devm_kzalloc(dev,
sizeof(struct act8865_regulator_data) *
ARRAY_SIZE(act8865_matches), GFP_KERNEL);
sizeof(struct act8865_regulator_data) *
num_matches, GFP_KERNEL);
if (!pdata->regulators)
return -ENOMEM;
pdata->num_regulators = ARRAY_SIZE(act8865_matches);
pdata->num_regulators = num_matches;
regulator = pdata->regulators;
for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
for (i = 0; i < num_matches; i++) {
regulator->id = i;
regulator->name = act8865_matches[i].name;
regulator->platform_data = act8865_matches[i].init_data;
of_node[i] = act8865_matches[i].of_node;
regulator->name = matches[i].name;
regulator->platform_data = matches[i].init_data;
of_node[i] = matches[i].of_node;
regulator++;
}
......@@ -269,34 +196,59 @@ static struct regulator_init_data
}
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
const struct i2c_device_id *i2c_id)
{
struct regulator_dev *rdev;
static const struct regulator_desc *regulators;
struct act8865_platform_data pdata_of, *pdata;
struct of_regulator_match *matches;
struct device *dev = &client->dev;
struct act8865_platform_data *pdata = dev_get_platdata(dev);
struct regulator_config config = { };
struct device_node **of_node;
int i, ret, num_regulators;
struct act8865 *act8865;
struct device_node *of_node[ACT8865_REG_NUM];
int i;
int ret;
unsigned long type;
pdata = dev_get_platdata(dev);
if (dev->of_node && !pdata) {
const struct of_device_id *id;
struct act8865_platform_data pdata_of;
id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
if (!id)
return -ENODEV;
ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
type = (unsigned long) id->data;
} else {
type = i2c_id->driver_data;
}
switch (type) {
case ACT8865:
matches = act8865_matches;
regulators = act8865_regulators;
num_regulators = ARRAY_SIZE(act8865_regulators);
break;
default:
dev_err(dev, "invalid device id %lu\n", type);
return -EINVAL;
}
of_node = devm_kzalloc(dev, sizeof(struct device_node *) *
num_regulators, GFP_KERNEL);
if (!of_node)
return -ENOMEM;
if (dev->of_node && !pdata) {
ret = act8865_pdata_from_dt(dev, of_node, &pdata_of, matches,
num_regulators);
if (ret < 0)
return ret;
pdata = &pdata_of;
}
if (pdata->num_regulators > ACT8865_REG_NUM) {
dev_err(dev, "Too many regulators found!\n");
if (pdata->num_regulators > num_regulators) {
dev_err(dev, "too many regulators: %d\n",
pdata->num_regulators);
return -EINVAL;
}
......@@ -313,8 +265,10 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
/* Finally register devices */
for (i = 0; i < ACT8865_REG_NUM; i++) {
const struct regulator_desc *desc = &act8865_reg[i];
for (i = 0; i < num_regulators; i++) {
const struct regulator_desc *desc = &regulators[i];
struct regulator_config config = { };
struct regulator_dev *rdev;
config.dev = dev;
config.init_data = act8865_get_init_data(desc->id, pdata);
......@@ -330,12 +284,13 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
i2c_set_clientdata(client, act8865);
devm_kfree(dev, of_node);
return 0;
}
static const struct i2c_device_id act8865_ids[] = {
{ "act8865", 0 },
{ .name = "act8865", .driver_data = ACT8865 },
{ },
};
MODULE_DEVICE_TABLE(i2c, act8865_ids);
......@@ -351,6 +306,6 @@ static struct i2c_driver act8865_pmic_driver = {
module_i2c_driver(act8865_pmic_driver);
MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
MODULE_DESCRIPTION("active-semi act88xx voltage regulator driver");
MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
MODULE_LICENSE("GPL v2");
/*
* act8865.h -- Voltage regulation for the active-semi act8865
* act8865.h -- Voltage regulation for active-semi act88xx PMUs
*
* Copyright (C) 2013 Atmel Corporation.
*
......@@ -29,6 +29,10 @@ enum {
ACT8865_REG_NUM,
};
enum {
ACT8865,
};
/**
* act8865_regulator_data - regulator data
* @id: regulator id
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment