Commit 79b5d026 authored by Maarten ter Huurne's avatar Maarten ter Huurne Committed by Mark Brown
Browse files

regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9



The documentation lists both 1.8V and 3.3V for this regulator output,
but 3.3V is mentioned more often and also matches what JZ4770 and
JZ4780 expect as an input.

Note that the voltage of REG9 is not programmable, so this commit only
changes the voltage reported in sysfs and debugfs, not the actual
output voltage of the hardware.

Signed-off-by: default avatarMaarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown's avatarMark Brown <broonie@kernel.org>
parent 30f065bf
......@@ -218,7 +218,7 @@ static const struct regulator_desc act8600_regulators[] = {
.ops = &act8865_ldo_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.fixed_uV = 1800000,
.fixed_uV = 3300000,
.enable_reg = ACT8600_LDO910_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment