Commit cef72982 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM DT updates from Arnd Bergmann:
 "This is another huge branch with close to 450 changessets related to
  devicetree files, roughly half of this for 32-bit and 64-bit
  respectively. There are lots of cleanups and additional hardware
  support for platforms we already support based on SoCs from Renesas,
  ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
  other manufacturers.

  A total of 6 new SoCs and 37 new boards gets added this time, one more
  SoC will come in a follow-up branch. Most of the new boards are for
  64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.

  Going more into details for SoC platforms with new hardware support:

   - The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
     platform, usually paired with an external 5G modem. So far we only
     support the Qualcomm SM8150 MTP reference platform, but no actual
     products.

   - For the slightly older Qualcomm platforms, support for several
     interesting products is getting added: Three laptops based on
     Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
     630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
     and several phones based on the older Snapdragon 410/MSM8916
     (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
     aka Wileyfox Swift).

   - Mediatek MT7629 is a new wireless network router chip, similar to
     the older MT7623. It gets added together with the reference board
     implementation.

   - Allwinner V3 is a repackaged version of the existing low-end V3s
     chip, and is used in the tiny Lichee Pi Zero plus, also added here.
     There is also a new TV set-top box based on Allwinner H6, the Tanix
     TX6, and the eMMC variant of the Olimex A64-Olinuxino development
     board.

   - NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
     family, similar to the i.MX8M Mini. As usual, there is a large
     number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
     SolidRun Hummingboard Pulse baseboard and System-on-Module,
     Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
     PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
     Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
     phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
     Innovations i.MX7 RMU2 board.

   - In a different NXP product line, the Layerscape LS1046A "Freeway"
     reference board gets added.

   - Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
     their set-top-box line and smart speaker with newer CPU and GPU
     cores compared to their predecessors. Both are now also supported
     by the Khadas VIM3 development board series, and the dts files for
     that get reorganized a bit to better deal with all variants.
     Another board based on SM1 that gets added is the SEI Robotics
     SEI610.

   - There are a handful of new x86 and Power9 server boards using
     Aspeed BMC chips that are gaining support for running Linux on the
     BMC through the OpenBMC project: Facebook
     Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
     these are still new machines using SoCs based on the ARM9 and ARM11
     CPU cores, as support for the new Cortex-A7 based AST2600 is still
     ramping up.

   - There are three new end-user products using 32-bit Rockchips SoCs:
     Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
     low-end RK3229 chip, while the two AOpen products Chromebox Mini
     (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
     commercial settings(digital signage, PoS, ...).

   - One more single-board computer based on the popular 64-bit RK3399
     is added: the Leez RK3399 P710"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
  arm64: dts: qcom: Add Lenovo Yoga C630
  ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
  ARM; dts: aspeed: mihawk: File should not be executable
  ARM: dts: aspeed: swift: Change power supplies to version 2
  ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
  ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
  ARM: dts: aspeed-g4: Add all flash chips
  ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
  ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
  ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
  ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
  ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
  ARM: dts: exynos: Remove not accurate secondary ADC compatible
  arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
  arm64: dts: meson-sm1-sei610: add stdout-path property back
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
  dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
  arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
  arm64: dts: meson: g12a: add reset to tdm formatters
  ...
parents d47ebd68 44acee20
......@@ -91,13 +91,11 @@ properties:
- description: Boards with the Amlogic Meson GXL S905X SoC
items:
- enum:
- amediatech,x96-max
- amlogic,p212
- hwacom,amazetv
- khadas,vim
- libretech,cc
- nexbox,a95x
- seirobotics,sei510
- const: amlogic,s905x
- const: amlogic,meson-gxl
......@@ -129,16 +127,33 @@ properties:
- const: amlogic,a113d
- const: amlogic,meson-axg
- description: Boards with the Amlogic Meson G12A S905D2 SoC
- description: Boards with the Amlogic Meson G12A S905D2/X2/Y2 SoC
items:
- enum:
- amediatech,x96-max
- amlogic,u200
- seirobotics,sei510
- const: amlogic,g12a
- description: Boards with the Amlogic Meson G12B A311D SoC
items:
- enum:
- khadas,vim3
- const: amlogic,a311d
- const: amlogic,g12b
- description: Boards with the Amlogic Meson G12B S922X SoC
items:
- enum:
- hardkernel,odroid-n2
- khadas,vim3
- const: amlogic,s922x
- const: amlogic,g12b
- description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
items:
- enum:
- seirobotics,sei610
- khadas,vim3l
- const: amlogic,sm1
...
......@@ -161,6 +161,20 @@ properties:
items:
- enum:
- fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
- kontron,imx6ul-n6310-som # Kontron N6310 SOM
- const: fsl,imx6ul
- description: Kontron N6310 S Board
items:
- const: kontron,imx6ul-n6310-s
- const: kontron,imx6ul-n6310-som
- const: fsl,imx6ul
- description: Kontron N6310 S 43 Board
items:
- const: kontron,imx6ul-n6310-s-43
- const: kontron,imx6ul-n6310-s
- const: kontron,imx6ul-n6310-som
- const: fsl,imx6ul
- description: i.MX6ULL based Boards
......@@ -188,6 +202,7 @@ properties:
- fsl,imx7d-sdb # i.MX7 SabreSD Board
- novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
- tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
- zii,imx7d-rmu2 # ZII RMU2 Board
- zii,imx7d-rpu2 # ZII RPU2 Board
- const: fsl,imx7d
......@@ -214,16 +229,26 @@ properties:
- fsl,imx8mm-evk # i.MX8MM EVK Board
- const: fsl,imx8mm
- description: i.MX8MN based Boards
items:
- enum:
- fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board
- const: fsl,imx8mn
- description: i.MX8MQ based Boards
items:
- enum:
- boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
- fsl,imx8mq-evk # i.MX8MQ EVK Board
- purism,librem5-devkit # Purism Librem5 devkit
- solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
- technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk
- const: fsl,imx8mq
- description: i.MX8QXP based Boards
items:
- enum:
- einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board
- fsl,imx8qxp-mek # i.MX8QXP MEK Board
- const: fsl,imx8qxp
......@@ -283,6 +308,7 @@ properties:
- description: LS1046A based Boards
items:
- enum:
- fsl,ls1046a-frwy
- fsl,ls1046a-qds
- fsl,ls1046a-rdb
- const: fsl,ls1046a
......
......@@ -46,6 +46,10 @@ properties:
- enum:
- mediatek,mt6765-evb
- const: mediatek,mt6765
- items:
- enum:
- mediatek,mt6779-evb
- const: mediatek,mt6779
- items:
- enum:
- mediatek,mt6795-evb
......
......@@ -45,6 +45,7 @@ description: |
mtp
sbc
hk01
qrd
The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
where the minor number may be omitted when it's zero, i.e. v1.0 is the same
......@@ -115,6 +116,13 @@ properties:
- const: qcom,msm8916-mtp
- const: qcom,msm8916
- items:
- enum:
- longcheer,l8150
- samsung,a3u-eur
- samsung,a5u-eur
- const: qcom,msm8916
- items:
- const: qcom,msm8996-mtp
......
......@@ -128,6 +128,21 @@ properties:
- const: google,veyron
- const: rockchip,rk3288
- description: Google Fievel (AOPEN Chromebox Mini)
items:
- const: google,veyron-fievel-rev8
- const: google,veyron-fievel-rev7
- const: google,veyron-fievel-rev6
- const: google,veyron-fievel-rev5
- const: google,veyron-fievel-rev4
- const: google,veyron-fievel-rev3
- const: google,veyron-fievel-rev2
- const: google,veyron-fievel-rev1
- const: google,veyron-fievel-rev0
- const: google,veyron-fievel
- const: google,veyron
- const: rockchip,rk3288
- description: Google Gru (dev-board)
items:
- const: google,gru-rev15
......@@ -311,6 +326,21 @@ properties:
- const: google,veyron
- const: rockchip,rk3288
- description: Google Tiger (AOpen Chromebase Mini)
items:
- const: google,veyron-tiger-rev8
- const: google,veyron-tiger-rev7
- const: google,veyron-tiger-rev6
- const: google,veyron-tiger-rev5
- const: google,veyron-tiger-rev4
- const: google,veyron-tiger-rev3
- const: google,veyron-tiger-rev2
- const: google,veyron-tiger-rev1
- const: google,veyron-tiger-rev0
- const: google,veyron-tiger
- const: google,veyron
- const: rockchip,rk3288
- description: Haoyu MarsBoard RK3066
items:
- const: haoyu,marsboard-rk3066
......@@ -329,6 +359,16 @@ properties:
- khadas,edge-v
- const: rockchip,rk3399
- description: Mecer Xtreme Mini S6
items:
- const: mecer,xms6
- const: rockchip,rk3229
- description: Leez RK3399 P710
items:
- const: leez,p710
- const: rockchip,rk3399
- description: mqmaker MiQi
items:
- const: mqmaker,miqi
......@@ -424,11 +464,6 @@ properties:
- rockchip,rk3288-evb-rk808
- const: rockchip,rk3288
- description: Rockchip RK3288 Fennec
items:
- const: rockchip,rk3288-fennec
- const: rockchip,rk3288
- description: Rockchip RK3328 Evaluation board
items:
- const: rockchip,rk3328-evb
......
......@@ -353,6 +353,12 @@ properties:
- const: licheepi,licheepi-zero
- const: allwinner,sun8i-v3s
- description: Lichee Zero Plus (with S3, without eMMC/SPI Flash)
items:
- const: sipeed,lichee-zero-plus
- const: sochip,s3
- const: allwinner,sun8i-v3
- description: Linksprite PCDuino
items:
- const: linksprite,a10-pcduino
......@@ -568,6 +574,11 @@ properties:
- const: olimex,a64-olinuxino
- const: allwinner,sun50i-a64
- description: Olimex A64-OlinuXino (with eMMC)
items:
- const: olimex,a64-olinuxino-emmc
- const: allwinner,sun50i-a64
- description: Olimex A64 Teres-I
items:
- const: olimex,a64-teres-i
......@@ -671,6 +682,11 @@ properties:
- const: sinlinx,sina33
- const: allwinner,sun8i-a33
- description: Tanix TX6
items:
- const: oranth,tanix-tx6
- const: allwinner,sun50i-h6
- description: TBS A711 Tablet
items:
- const: tbs-biometrics,a711
......
......@@ -44,6 +44,10 @@ Optional properties:
what bootloader sets up in IOMUXC_GPR1[11:0] will be
used.
- fsl,burst-clk-enable For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
devices, the presence of this property indicates that
the weim bus should operate in Burst Clock Mode.
Timing property for child nodes. It is mandatory, not optional.
- fsl,weim-cs-timing: The timing array, contains timing values for the
......
......@@ -22,6 +22,7 @@ Required Properties:
components.
- resets : phandle of the internal reset line
- #clock-cells : should be 1.
- #reset-cells : should be 1 on the g12a (and following) soc family
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
......
......@@ -11,6 +11,7 @@ Required Properties:
"amlogic,axg-clkc" for AXG SoC.
"amlogic,g12a-clkc" for G12A SoC.
"amlogic,g12b-clkc" for G12B SoC.
"amlogic,sm1-clkc" for SM1 SoC.
- clocks : list of clock phandle, one for each entry clock-names.
- clock-names : should contain the following:
* "xtal": the platform xtal
......
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/bindings/clock/imx8mn-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP i.MX8M Nano Clock Control Module Binding
maintainers:
- Anson Huang <Anson.Huang@nxp.com>
description: |
NXP i.MX8M Nano clock control module is an integrated clock controller, which
generates and supplies to all modules.
properties:
compatible:
const: fsl,imx8mn-ccm
reg:
maxItems: 1
clocks:
items:
- description: 32k osc
- description: 24m osc
- description: ext1 clock input
- description: ext2 clock input
- description: ext3 clock input
- description: ext4 clock input
clock-names:
items:
- const: osc_32k
- const: osc_24m
- const: clk_ext1
- const: clk_ext2
- const: clk_ext3
- const: clk_ext4
'#clock-cells':
const: 1
description: |
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
for the full list of i.MX8M Nano clock IDs.
required:
- compatible
- reg
- clocks
- clock-names
- '#clock-cells'
examples:
# Clock Control Module node:
- |
clk: clock-controller@30380000 {
compatible = "fsl,imx8mn-ccm";
reg = <0x0 0x30380000 0x0 0x10000>;
#clock-cells = <1>;
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
<&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
clock-names = "osc_32k", "osc_24m", "clk_ext1",
"clk_ext2", "clk_ext3", "clk_ext4";
};
# Required external clocks for Clock Control Module node:
- |
osc_32k: clock-osc-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "osc_32k";
};
osc_24m: clock-osc-24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "osc_24m";
};
clk_ext1: clock-ext1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext1";
};
clk_ext2: clock-ext2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext2";
};
clk_ext3: clock-ext3 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <133000000>;
clock-output-names = "clk_ext3";
};
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency= <133000000>;
clock-output-names = "clk_ext4";
};
...
......@@ -3,6 +3,7 @@ EEPROMs (SPI) compatible with Atmel at25.
Required properties:
- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
Example "<vendor>,<type>" values:
"anvo,anv32e61w"
"microchip,25lc040"
"st,m95m02"
"st,m95256"
......
......@@ -26,6 +26,9 @@ properties:
- items:
- const: allwinner,sun50i-a64-i2c
- const: allwinner,sun6i-a31-i2c
- items:
- const: allwinner,sun50i-h6-i2c
- const: allwinner,sun6i-a31-i2c
- const: marvell,mv64xxx-i2c
- const: marvell,mv78230-i2c
......
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A33 Thermal Sensor Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <maxime.ripard@bootlin.com>
properties:
"#io-channel-cells":
const: 0
"#thermal-sensor-cells":
const: 0
compatible:
const: allwinner,sun8i-a33-ths
reg:
maxItems: 1
required:
- "#io-channel-cells"
- "#thermal-sensor-cells"
- compatible
- reg
additionalProperties: false
examples:
- |
ths: ths@1c25000 {
compatible = "allwinner,sun8i-a33-ths";
reg = <0x01c25000 0x100>;
#thermal-sensor-cells = <0>;
#io-channel-cells = <0>;
};
...
......@@ -15,6 +15,7 @@ Required properties:
"mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
"mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779
"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
......
......@@ -26,6 +26,7 @@ Required properties:
- GXBB (S905) : "amlogic,gxbb-vdec"
- GXL (S905X, S905D) : "amlogic,gxl-vdec"
- GXM (S912) : "amlogic,gxm-vdec"
followed by the common "amlogic,gx-vdec"
- reg: base address and size of he following memory-mapped regions :
- dos
- esparser
......@@ -47,8 +48,8 @@ Required properties:
Example:
vdec: video-decoder@c8820000 {
compatible = "amlogic,gxbb-vdec";
vdec: video-codec@c8820000 {
compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
reg = <0x0 0xc8820000 0x0 0x10000>,
<0x0 0xc110a580 0x0 0xe4>;
reg-names = "dos", "esparser";
......
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <maxime.ripard@bootlin.com>
properties:
"#thermal-sensor-cells":
const: 0
compatible:
enum:
- allwinner,sun4i-a10-ts
- allwinner,sun5i-a13-ts
- allwinner,sun6i-a31-ts
reg:
maxItems: 1
interrupts:
maxItems: 1
allwinner,ts-attached:
$ref: /schemas/types.yaml#/definitions/flag
description: A touchscreen is attached to the controller
allwinner,tp-sensitive-adjust:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 15
default: 15
description: Sensitivity of pen down detection
allwinner,filter-type:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
maximum: 3
default: 1
description: |
Select median and averaging filter. Sample used for median /
averaging filter:
0: 4/2
1: 5/3
2: 8/4
3: 16/8
required:
- "#thermal-sensor-cells"
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
rtp: rtp@1c25000 {
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
allwinner,ts-attached;
#thermal-sensor-cells = <0>;
/* sensitive/noisy touch panel */
allwinner,tp-sensitive-adjust = <0>;
allwinner,filter-type = <3>;
};
...
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment