GitLab

qemu // build fix + update URLs

See merge request !6

Point at the git repositories on gitlab.arm.com.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

The qemu semihosting target does copy the u-boot binary. Add the proper
dependency on u-boot to fix parallel build.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>

This doesn't actually use DTB_TARGET by default, but it does set up the
variable so that the 'make dtb' target does something.
Signed-off-by: Grant Likely <grant.likely@arm.com>

support the imx8mm-evk board

Jose's QEMU changes

the qemu-%-dbg sets -s -S in the qemu invocation.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>

Signed-off-by: Jose Marinho <jose.marinho@arm.com>

Fixes for lx2160a build

Some OP-TEE related fixes are needed for the platform to boot correctly
using OP-TEE.
Specifically in TF-A for lx2, the option for parsing header on optee is
not supported.  It expects a binary which can be loaded in memory where
execution can start from.

So add an option to support a single binary creation.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

'make flash-usb' will download the firmware to a rk3399 in maskrom mode
via USB.
Signed-off-by: Grant Likely <grant.likely@arm.com>

AVB is a fine feature, but it isn't actually needed for the purposes of
enabling UEFI secure variables via StMM.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Generalize the config for using U-Boot SPL instead of TF-A BL2. This
simplifies the Rockchip rk3399 support as well as makes it easier to
bring up other boards using CONFIG_SPL
Signed-off-by: Grant Likely <grant.likely@arm.com>

For consistency, and to prevent calling into build targets when doing
config operations, move all the delegate build targets into the else
clause of the $config-targets if/else/endif block.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Cleans up stmm build
Signed-off-by: Grant Likely <grant.likely@arm.com>

edk2/BaseTools is a real directory, so using that as a target means the
target won't get built. Also the stmm target is built from the edk2
tree, so it makes sense to prefix the target with 'edk2-'. Change both
targets to be prefixed with 'edk2-' which should not conflict with the
directory name and can be set up as .PHONY targets.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

The previous commit to add lx2160a platform support missed the most
important file. <facepalm/>. Add it now.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Signed-off-by: Grant Likely <grant.likely@arm.com>

The generic code was expecting the marvell platform support to be in the
same directory. Clean this up.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Signed-off-by: Grant Likely <grant.likely@arm.com>

U-Boot needs to support RPMB for the stmm backend to be able to use it
for storing variables.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Set the correct platform and sub-platform for this board so that optee
will compile.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Device id will change per-platform. Move it out of the core
configuration file.
Signed-off-by: Grant Likely <grant.likely@arm.com>

All u-boot targets were marked as no-dot-config targets, but that breaks
the build because then the script cannot choose how to set environmental
variables like CROSS_COMPILE. Fix by restricting u-boot no-dot-config
targets to %config, %clean and mrproper
Signed-off-by: Grant Likely <grant.likely@arm.com>

The manifest is now maintained in a separate repo to make it easier for
developers to change the source repo version without affecting the build
scripts repo.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Signed-off-by: Grant Likely <grant.likely@arm.com>

Use a single variable for the common QEMU arguments and document how to
run U-Boot in QEMU.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Fixes bug in semihosting directory creation when OPTEE is disabled. If
optee is disabled, trying to copy non-existent files is going to fail.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Put the name of the stmm images into $STMM_FD so it can be referenced in
multiple places, including the optee_os/all target.
Signed-off-by: Grant Likely <grant.likely@arm.com>

With this patch, by default both semihosting and nor_flash images will
be built and can be conveniently run with either 'make qemu-fip' or
'make qemu-semihosting'.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Simple tidy-up to match the name of the optee_os source directory.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Simple target than turns on StMM & optee options in U-Boot. No
guarantees this will work for your platform.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Fix build problems of not finding binary images because the output
directory was incorrectly set.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Instead of configuring optee and stmm build in this tool, use the U-Boot
configuration to decide whether or not to build U-Boot and StandaloneMM.
Signed-off-by: Grant Likely <grant.likely@arm.com>

Was using the wrong optee branch for the standalone mm support work.
Change to branch with the current patchset
Signed-off-by: Grant Likely <grant.likely@arm.com>

Signed-off-by: Grant Likely <grant.likely@arm.com>

edk2 basetools is a generic target that needs to be satisfied before any
edk2 build target. Split it into a separate rule so that it can be used
by other edk2 build targets when necessary.
Signed-off-by: Grant Likely <grant.likely@arm.com>

$WORKSPACE should not be the edk2 source directory. If it is then the
StMM build will fail. Set WORKSPACE to the parent directory instead.
Signed-off-by: Grant Likely <grant.likely@arm.com>