Commit 22148df0 authored by Heiner Kallweit's avatar Heiner Kallweit Committed by David S. Miller
Browse files

r8169: don't use netif_info et al before net_device has been registered

There's no benefit in using netif_info et al before the net_device has
been registered. We get messages like
r8169 0000:03:00.0 (unnamed net_device) (uninitialized): [message]
Therefore use dev_info/dev_err instead.

As a side effect we don't need parameter dev for function
rtl8169_get_mac_version() any longer.

Signed-off-by: default avatarHeiner Kallweit <>
Signed-off-by: default avatarDavid S. Miller <>
parent c6849a3a
......@@ -2483,7 +2483,7 @@ static const struct ethtool_ops rtl8169_ethtool_ops = {
static void rtl8169_get_mac_version(struct rtl8169_private *tp,
struct net_device *dev, u8 default_version)
u8 default_version)
* The driver currently handles the 8168Bf and the 8168Be identically
......@@ -2588,7 +2588,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
tp->mac_version = p->mac_version;
if (tp->mac_version == RTL_GIGA_MAC_NONE) {
netif_notice(tp, probe, dev,
"unknown MAC, using family default\n");
tp->mac_version = default_version;
} else if (tp->mac_version == RTL_GIGA_MAC_VER_42) {
......@@ -8107,40 +8107,39 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* enable device (incl. PCI PM wakeup and hotplug setup) */
rc = pcim_enable_device(pdev);
if (rc < 0) {
netif_err(tp, probe, dev, "enable failure\n");
dev_err(&pdev->dev, "enable failure\n");
return rc;
if (pcim_set_mwi(pdev) < 0)
netif_info(tp, probe, dev, "Mem-Wr-Inval unavailable\n");
dev_info(&pdev->dev, "Mem-Wr-Inval unavailable\n");
/* use first MMIO region */
region = ffs(pci_select_bars(pdev, IORESOURCE_MEM)) - 1;
if (region < 0) {
netif_err(tp, probe, dev, "no MMIO resource found\n");
dev_err(&pdev->dev, "no MMIO resource found\n");
return -ENODEV;
/* check for weird/broken PCI region reporting */
if (pci_resource_len(pdev, region) < R8169_REGS_SIZE) {
netif_err(tp, probe, dev,
"Invalid PCI region size(s), aborting\n");
dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n");
return -ENODEV;
rc = pcim_iomap_regions(pdev, BIT(region), MODULENAME);
if (rc < 0) {
netif_err(tp, probe, dev, "cannot remap MMIO, aborting\n");
dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
return rc;
tp->mmio_addr = pcim_iomap_table(pdev)[region];
if (!pci_is_pcie(pdev))
netif_info(tp, probe, dev, "not PCI Express\n");
dev_info(&pdev->dev, "not PCI Express\n");
/* Identify chip attached to board */
rtl8169_get_mac_version(tp, dev, cfg->default_ver);
rtl8169_get_mac_version(tp, cfg->default_ver);
tp->cp_cmd = 0;
......@@ -8157,7 +8156,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc < 0) {
netif_err(tp, probe, dev, "DMA configuration failed\n");
dev_err(&pdev->dev, "DMA configuration failed\n");
return rc;
......@@ -8185,7 +8184,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
rc = rtl_alloc_irq(tp);
if (rc < 0) {
netif_err(tp, probe, dev, "Can't allocate interrupt\n");
dev_err(&pdev->dev, "Can't allocate interrupt\n");
return rc;
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment