Commit b19bce03 authored by Heiner Kallweit's avatar Heiner Kallweit Committed by David S. Miller
Browse files

net: ethernet: mediatek: fix warning in phy_start_aneg

linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup:

[ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548 phy_start_aneg+0x110/0x144
[ 5.178826] called from state READY
[ 5.264111] [<c0629fd4>] (phy_start_aneg) from [<c0e3e720>] (mtk_init+0x414/0x47c)
[ 5.271630] r7:df5f5eec r6:c0f08c48 r5:00000000 r4:dea67800
[ 5.277256] [<c0e3e30c>] (mtk_init) from [<c07dabbc>] (register_netdevice+0x98/0x51c)
[ 5.285035] r8:00000000 r7:00000000 r6:c0f97080 r5:c0f08c48 r4:dea67800
[ 5.291693] [<c07dab24>] (register_netdevice) from [<c07db06c>] (register_netdev+0x2c/0x44)
[ 5.299989] r8:00000000 r7:dea2e608 r6:deacea00 r5:dea2e604 r4:dea67800
[ 5.306646] [<c07db040>] (register_netdev) from [<c06326d8>] (mtk_probe+0x668/0x7ac)
[ 5.314336] r5:dea2e604 r4:dea2e040
[ 5.317890] [<c0632070>] (mtk_probe) from [<c05a78fc>] (platform_drv_probe+0x58/0xa8)
[ 5.325670] r10:c0f86bac r9:00000000 r8:c0fbe578 r7:00000000 r6:c0f86bac r5:00000000
[ 5.333445] r4:deacea10
[ 5.335963] [<c05a78a4>] (platform_drv_probe) from [<c05a5248>] (really_probe+0x2d8/0x424)

maybe other boards using this generic driver are affected


- phy_set_max_speed() is only needed if you want to reduce the
  max speed, typically if the PHY supports 1Gbps but the MAC
  supports 100Mbps only.

- The pause parameters are autonegotiated. Except you have a specific
  need you normally don't need to manually fiddle with this.

- phy_start_aneg() is called implicitly by the phylib state machine,
  you shouldn't call it manually except you have a good excuse.

- netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't
  needed. It's done by phy_link_change() in phylib.

Signed-off-by: default avatarFrank Wunderlich <>
Reviewed-by: default avatarHeiner Kallweit <>
Acked-by: default avatarSean Wang <>
Signed-off-by: default avatarDavid S. Miller <>
parent c5715b8f
......@@ -258,11 +258,6 @@ static void mtk_phy_link_adjust(struct net_device *dev)
mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
if (dev->phydev->link)
if (!of_phy_is_fixed_link(mac->of_node))
......@@ -347,17 +342,6 @@ static int mtk_phy_connect(struct net_device *dev)
if (mtk_phy_connect_node(eth, mac, np))
goto err_phy;
dev->phydev->autoneg = AUTONEG_ENABLE;
dev->phydev->speed = 0;
dev->phydev->duplex = 0;
phy_set_max_speed(dev->phydev, SPEED_1000);
linkmode_copy(dev->phydev->advertising, dev->phydev->supported);
return 0;
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment